The ES is an economic overhead stirrer for low/medium viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs…

The MICROSTIRRER is a magnetic stirrer with epoxy painted metal structure that ensures a high resistance to chemical agents. A small, simple and efficient stirrer specially designed for microtitrations. The MICROSTIRRER remains cold even after several days of continuous use, a feature that is…

The AREC.T is a digital heating magnetic stirrer with a white ceramic hot plate, that ensures excellent resistance to chemicals and scratches, is extremely easy to clean and is suitable for observing color changes (e.g. during titration, etc.). AREC.T is the first hot plate stirrer with an…

Vortex mixer with adjustable stirring speed, with touch or continuous mode.

The KS 1000 Scrubber guarantees maximum workplace safety by neutralizing corrosive and toxic fumes produced during Kjeldahl digestion in two steps: dilution and neutralization. •High-efficiency gas scrubbing for maximum safety in the laboratory •Tap water-free for reduced water consumption and…

Thomas No. 1198F59: for MST, MICROSTIRRER, AGE, MULTISTIRRER 15, AMI and AMI 4 Thomas No. 1198F60: for MST, MICROSTIRRER, AGE, ATE, MULTISTIRRER 6, MULTISTIRRER 15, AMI and AMI 4 Thomas No. 1198F61: for ATE only Thomas No. 1198F62: for ESP only

Small and efficient magnetic stirrer. Robust Structure Technopolymer casing resists chemicals White surface for visualization of particles and color changes Long life operation Reliable Results Speed regulation up to 1100 rpm Accepts up to 5 liter flasks …

The VELP® SCIENTIFIC beaker, imhoff cone and stand are suitable for use in research facilities and chemical laboratories. They ensure smooth functioning of your instruments. These products are made of materials which offer enhanced durability.

Fiber Analyzers that use pre-heated reagents for fiber analysis according to Weende, Van Soest and other official methods. High Performance Rapid analysis – 2 hours vs. 6 hours with manual systems Reliable results High reproducibility Back-pressure pump prevents…

Safe Operations Extremely resistant sealed case IP 54 Protection class is a guarantee of durability also when working in aggressive environment Full protection in case of overload, overtemperature and over current Lock key to prevent unintentional modification of the settings …

Safe Operations Extremely resistant sealed case IP 54 Protection class is a guarantee of durability also when working in aggressive environment Full protection in case of overload, overtemperature and over current™ Lock key to prevent unintentional modification of the…

The AREX 5 is a robust and versatile hotplate stirrer suitable for applications ranging from basic to temperature-sensitive where precise sample thermoregulation is required. The AREX 5 can work stand-alone or be upgraded to digital by connecting the VTF digital temperature controller. …

Filtration unit for the final filtration and washing phase defined in the enzymatic method for dietary fiber extraction. Time Saving Single or multiple sample processing Short filtration time – under 20 minutes, even for 6 samples Pump to speed up filtration process…

A wide range of consumables designed for accurate and reliable Kjeldahl analysis. The addition of a suitable catalyst, along with high temperature, have influence on the speed and the efficiency of the mineralization in Kjeldahl analysis. Achieving the highest level of performance in a…

The DK 6 Series digestion unit with aluminum heating block ensures high thermal homogeneity heating up to 450 °C. The temperature of the block is constantly controlled by a microprocessor and is extremely stable, homogeneous and precise: ±0.5°C at all selectable temperatures. …

Fully Automatic Kjeldahl Digestion Units for nitrogen analysis and protein determination that incorporate the revolutionary TEMS™ technology for unprecedented Savings in terms of Time, Energy - as much as 35%, Money and Space. High Technology Microprocessor control of precise…

The RX3 is a modern basic vortex mixer that runs at a single, fixed stirring speed in touch mode. The technopolymer ensures optimum chemical resistance and enhanced handling. The ergonomic and highly innovative design along with the zinc base ensure an excellent stability on the bench, usable on…

The ZX4 is an advanced vortex mixer with adjustable stirring speed and two operating modes, sensor or continuous. Thanks to the revolutionary IR sensor mode, an infrared system (IR) detects the presence of the test tube and the vortex mixer automatically starts vibrating! No press, No stress! …

Optimum solution for the acid/basic hydrolysis of food and feed samples prior to solvent extraction for total fat analysis. Improves Analysis Hydrolysis / digestion by acid or base Ensures conformity with AOAC standard No sample transfer – no sample loss Crucibles go…

The Vortex Wizard represents a technological innovation in the evolutionary process of vortex mixers. Optical technology provides an innovative operating mode that is absolutely unique on the laboratory mixer market. Thanks to the revolutionary IR sensor mode, an infrared system (IR) detects…

The FP4 is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. It is a portable model with four stirring places, designed to be used on-site, as it can be powered…

The MULTI-TX5 Digital designed for high sample throughput and superior versatility as it supports mixing applications requiring different test tubes. Different interchangeable foam racks permit to work with different test tubes, from 10 to 29 mm in diameter. The innovative and compact…

Digital magnetic stirrer guaranteeing continuous operations both at low and high speed. Designed to meet the highest requirement with exclusive programming options and safety.

The state-of-the-art digital multi-position magnetic stirrer with 6 or 15 positions, that remains cold even after several days of continuous use. Reliable & Precise Setting Bright digital display for accurate speed monitoring Exclusive, on-board timer for unattended operation …

Hot plate stirrer with a square, white ceramic heating plate extremely resistant to corrosion and easy to clean.

The MULTI-HS hot plate stirrers have a unique system of warnings: when the plate temperature reaches 50 deg C the display will show a residual hot plate message preventing potential burning. The Safety Lock feature avoids possible alteration of the working conditions or unintentional modification…

The VELP® SCIENTIFIC accessory is suitable for use with Kjeldahl digestion unit models. You can choose ideal replacement part or accessory which ensures smooth functioning of these units. These products are made of materials which offer enhanced durability.

The TX4 is a digital vortex mixer with adjustable stirring speed and two operating modes, sensor or continuous, for an outstanding repeatability. Thanks to the revolutionary IR sensor mode, an infrared system (IR) detects the presence of the test tube and the vortex mixer automatically starts…

Reliable and Precise Bright digital display for accurate speed monitoring On board timer for unattended operations Auto reverse of the stirring direction to ensure better mixing SpeedServo ™ technology ensuring costant speed counter reacting to viscosity changes …

The VELP® SCIENTIFIC hemispheric bowl is suitable for use in research facilities and chemical laboratories to conduct wide range of experiments. It is easy to handle and convenient to use.

The FC S Series is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. FC S Series is available in two configurations: FC4S, with 4 independent positions FC6S,…

Compact vortex mixer suitable for different mixing requirements, with touch or continuous mode. Original Design • Compact in height and area • Stability is optimized with selection lever related to operating mode • 3 anti-slip rubber feet for staying in required position…