This device can be used as a classic standard calorimeter or as an electric calorimeter. Made of aluminum and plastic, the calorimeter has a diameter of 10cm, height of 11cm, liquid capacity of 175ml, and a heat capacity of 25J/°C. Electrical requirements are 6V DC, up to 2A.

A simple but effective device for demonstrating Lenz's Law using eddy currents induced in the wall of a copper tube by a falling magnet. The demonstrator consists of a 12"; long copper tube and two apparently identical metal slugs with rubber end caps. One slug is plain steel, and falls…

The Solar Kit offers a convenient introduction to the conversion of solar light energy into electrical energy. The conversion is carried out by a photoelectric panel, and three “consumers” are included to demonstrate the use of the electrical energy; an LED shows the conversion back to…

Ideal for demonstrating series and parallel circuits. Lamp Boards are supplied with spare bulbs and an activity guide.

Knife Switches for low voltage experiments (less than 36V) with plastic bases. These items are available with either thumbscrew or spring binding posts.

The United hand held generator offers features and quality similar to much more expensive brands currently offered in the science education market. This 6V DC Generator can deliver up to 400mA current. The generator comes equipped with a polarity coded plug in lead with alligator clips. The clear…

2"; long, plain, chrome plated alligator clips with excellent conductivity. 2"; long, with insulated sleeve, chrome plated alligator clips with excellent conductivity. Pack of 10, five each red and black.

This motor generator demonstrates both shunt wound, and series wound connections for motors and generators, and can be used with AC or DC supplies. Motor is easily dismantled to change the configuration. Requires Low voltage AC/DC Power Supply (not included)

Plastic Insulated Copper wire is 22 gauge, supplied in 100 foot rolls and available in three colors. Bare Nickel Chromium Wire is supplied in 4 ounce spools. Enameled Copper Magnet Wire is supplied in 4 ounce spools. Soft Bare Copper Wire is available in 4 ounce or 1 lb spools.

This 3V conductivity tester demonstrates the electrical properties of various liquids. The item consists of a molded plastic lamp socket mounted on a base with 2 binding posts for connecting a wire cord. It comes complete with bulb, glass tumbler, and instruction manual.

Friction Rods are 12"; long unless noted. Excellent for demonstrating static electricity

We offer a superior quality Wimshurst machine for demonstrating high voltage electric charges. Our unit features acrylic rotating disks, good quality foil strips and brushes, insulated cylindrical capacitors, and a durable plastic platform. Guaranteed to produce large sparks for easy…

This kit includes an air core solenoid and a current balance for demonstrating and measuring the small force experienced by a conductor carrying an electric current in a magnetic field. To run the experiment, one half of the current balance is placed inside the solenoid. The other half has an…

Our meters are mounted in black plastic cases. Meters have a scale length of 75mm, offer +/- 2.5% accuracy and come with 5-way binding posts and an external zero-setting screw. Meters are not protected against prolonged or significant overload. Stackable for storage.

This large van de Graaff generator uniquely offers alternative drive modes, either hand-cranked or motor driven. Excellently constructed, the generator reliably delivers charge and sparks 10cm long and more immediately on setting it in motion, even under high humidity conditions. In hand-cranked…

Plastic Battery holder available with Fahnestock Clips, wire leads, or fahnestock clips and jointers.

Flexible 18swg stranded wire cord with two way stackable banana plugs at both ends.

Solar motor is specifically designed for experiments using low starting voltage (0.5V) and current (25mA). Speed: 1000-5000 RPM. Motor is approximately 38mm long x 24mm in diameter. Shaft size is 8mm long x 2mm in diameter. Includes soldered-on 4" wire leads.

This unique hand generator is an easy yet effective way to teach how AC and DC electricity is produced. Banana plugs can be inserted into the different connectors to change from AC to DC electricity. The unit has a clear base for easy demonstration of connections. Includes an activity guide.

The 1660-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

Friction pads are 12"; x 12";. For use with Friction Rods to demonstrate Static Electricity.

Convenient fully assembled battery set holds up to 4 D-size batteries. Five color-coded binding posts on the base for easy, safe, and reliable connections to hook-up cords provide outlets for 1.5V, 3V, 4.5V or 6V supply voltages. Superior construction¡Xrobust, molded battery holders for secure…

Build your own series circuit using the handy Create-A-Circuit-Kit. It comes complete with a "D" cell battery holder, a knife switch, two miniature light bulbs, two lamp holders, and four connector cords. Instructions are included.

This ingenious device offers a practical and economical solution for light measurements in a variety of learning situations. Whether measuring environmental light or quantifying an optical experiment, this compact luxmeter meets the need. For most uses, the autoranging feature makes this a…

Convenient, economical package of materials to start investigating electricity concepts. Assortment includes: 6 Round Plastic Bulb Holders, 3 Knife Switches, 6 Battery Holders with Fahnestock Clips, 10 Fahnestock Clips, 1 Wire Stripper, 3 Wires with Alligator Clips, 18"; Assorted Colors, 3 Wires…

This electroscope is housed in a 250ml borosilicate glass flask with a metal rod attached to a rubber stopper. A pair of aluminum leaves is suspended from an alligator clip. The knob on top of the rubber stopper accepts a charge. When the charge enters the flask, the aluminum leaves separate. Also…

Compact analog multimeter offers popular features such as AC voltage, DC voltage, DC current, Ohms, measures capacitance and decibels, and comes with overload protection and diode test. Includes test leads and instruction manual. Operates on 2 AA size batteries (included).

Flexible, 18swg stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end. Alligator clip has a protective vinyl sheath.

This sturdy electroscope features a metal case with front and rear glass windows for preventing air currents from affecting the deflection of the leaves. Leaves are gold and aluminum. Leaf support rod is held in place by an insulating plastic sleeve. A graduated scale is also provided for measuring…

This simple and ingenious device quickly and graphically shows students how different metals conduct heat at different rates. It consists of four identically-sized bars of common metals - steel, brass, aluminum, and copper - mounted parallel to one another in a plastic support. Attached to each bar…

Fahnestock Clips supplied in packs of ten.

This economical seven piece kit lets you demonstrate the conversion between different forms of energy. It includes four devices for generating electrical energy from mechanical motion (hand generator), chemical energy (batteries), light (solar energy), and wind (windmill) and three devices for…