Nalge 2204 series Pigmented to provide protection for light-sensitive materials Leakproof Sizes 1/2 and 1 gallon include size 38-430 cap; 2 gallon size includes 53B cap Autoclavable 1 and 2 gallon sizes have loop on shoulder

Centrifugalize low- to moderate-speed large-volume biological and chemical samples with Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, which include a sealing closure for added leakproof assurance at maximum speeds for when spinning hazardous materials. Molded of rigid and robust…

Nalge 2212 With polypropylene screw closure 3 1/2” neck opening Sturdy handle is attached to molded-in shoulder loops Leakproof Autoclavable Ideal for storing solutions, media, and sterile water. Useful for handling large volumes of powders and other solid samples. Calibrated in liters…

Heavy-duty for repeated autoclaving of small instruments and labware With tapered sides, rounded corners and strong rims Stackable

Perform biopharmaceutical aseptic fluid transfer or sampling applications with the tri-clover flange of Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these…

Incubate liquid cultures on a slant using Thermo Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are…

Nalge 2203 series Leakproof Same design as 1706L80 series, but autoclavable Sizes 1/2 and 1 gallon include size 38-430 cap; 2 gallon size includes 53B cap Autoclavable 1 and 2 gallon sizes have loop on shoulder

Polypropylene with Teflon® TFE plug No lubrication required Offered in 2 mm and 4 mm bore sizes Arms are five-mm bore, serrated to take 1/4 to 7/16 inch rubber tubing

Closure size: 70mm; vacuum limit: 5in (127mm) Hg; pressure limit: 2 psig (0.137 bar) Fluid transfer closure is composed of polypropylene and is made for fluid transfer in the lab or field Autoclavable closure fits Nalgene® Mason jars or 125mL and 250mL straight-sided jars with 70mm…

For standard filter papers Body is at 60° angle with internal ribs at 58° for rapid filtration Outside ribbing eliminates air lock Autoclavable

Same as 5150C12 series, except bulk-packed Conical bottom allows complete retrieval of sample Non-cytotoxic; non-pyrogenic When used with cryogenic holder, base of vial interlocks with holder to permit one-handed replacement of closure. Fill line, graduations and large marking area on vial.…

Ideal for bacterial, yeast and tissue isolations True one liter volume Autoclavable Excellent clarity and mechanical strength Non-cytotoxic USP class IV Recommended operating temperature: 4 to 22°C Storage to -70°C Leakproof up to 15,810 x g

Features double-action living hinges for extra leverage and long life Jaws have interlocking teeth to grip objects tightly Scissor-type handles have a ratchet to lock tips shut Handy clamp for chromatography columns Durable forceps can be used repeatedly Autoclavable

Store and transport solids, powders and liquids using Thermo Scientific™ Nalgene™ Wide Mouth Polypropylene Carboys with Handles. These durable natural polypropylene (PP) carboys feature a convenient wide-mouth opening to promote ease of cleaning and dispensing. The wide-shoulder…

Replace glass lab funnels with Thermo Scientific™ Nalgene™ Utility Funnels, which are an excellent shatter-proof alternative.  5207H70 and 5207H78 are made from shatter-proof, autoclavable polypropylene 5207H86 has a large throat opening for faster transfer of materials…

Guarantee leakproof services with secure-fitting Thermo Scientific™ Nalgene™ Replacement Screw Closures for Nalgene Carboys. Made to fit Nalgene Carboys † The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following…

Thermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …

All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

Perform aseptic fluid transfer or sampling in biopharmaceutical applications with Thermo Scientific™ Nalgene™ Polypropylene Sanitary Carboys with 3" Sanitary Neck Design. The carboy's welded sanitary neck is easy to clean with no screw threads. Versatile with…

Nalge 2221 series Rigid bottles for smooth pouring Large molded handle accommodates gloved hand Excellent chemical resistance Autoclavable and leakproof Dimensions: 1 gallon jugs measure 11 3/4” high and take size 38-430 caps. 2 gallon jugs measure 15” high and take size 53B caps.…

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

Polypropylene Leakproof silicone gasket in closure Externally threaded vial Printed fill line, graduations and white marking area For use in mechanical and vapor-phase freezers. Leakproof to 8000 x g in centrifuge. Includes Certificate of Quality which assures that vials are non-cytotoxic,…

Store, mix and dispense reagents in Thermo Scientific™ Nalgene™ Closed-Dome Polypropylene Tanks, designed for use as closed containment systems. Offered in sizes ranging from 75 to 380L , tanks featurea a 150mm neck opening fitted with a gasketed closure for secure sealing. …

Thick-walled polypropylene Nalge 2126 Wide mouth Polypropylene bottle and closure TPE gasket for leakproof vacuum Sizes range from 1 to 5 liters Durable bottle for extra-rugged service. Polypropylene bottle with white polypropylene closure and TPE gasket provide…

Significantly reduce evaporation and contamination by using a Thermo Scientific™ Nalgene™ Rectangular Polypropylene Tank with Cover, offered in sizes ranging from 8 to 114L. Tanks can be modified with a factory-installed spigot. Features: Suitable for use with many…

Jerrican Cap with Strap 53mm screw thread

Autoclavable Two-part assembly For attachment to centrifuge tubes or bottles to prevent leakage during extremely high speed centrifugation. Two-part assembly consists of polypropylene screw closure and a retained silicone gasket. Caps can be written on for easy notation.

Dry and sterilize instruments and labware with Thermo Scientific™ Nalgene™ Large Polypropylene Sterilizing Pans. These autoclavable pans are also useful for collecting and washing soiled lab equipment. Pans feature rolled edges for extra stiffness and molded-in handles for easy…

Economical, non-sterile without printing or graduations Deep-skirted screw closure design minimizes risk of contamination Self-standing without a holder; conical bottom allows complete sample retrieval Externally-threaded polypropylene vials and high-density polyethylene closures minimize…

Thermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …

Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…

1228A16, A17 and A25 are for use only with NALGENE narrow- and wide-mouth bottles and Erlenmeyer flasks 1228A27 is for use with carboys Autoclavable Available in natural and amber