Acrylic Plastic Made of transparent acrylic plastic to give maximum protection against beta radiation during procedures such as nucleic acid sequencing, recombinant DNA studies, etc., using beta emitting isotopes Beta radiation from a 100 mCi point source of P 32 shows no penetration through a…

Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

Reduce the risk of carry-over contamination and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ Bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers.…

Angled pipet holder prevents pipets from sliding out. Accommodates bags, boxes, pipet canisters or 1 - 100 mL individually-wrapped serological pipets.

Replacement closures Size: 120mm High-density polyethylene Natural Large jar closure is made of polypropylene Pack of 12

Polypropylene screw closure Teflon TFE stir bar Polyvinylidene fluoride, stainless steel reinforced shaft TFE impeller Ideal for low-speed mixing of large volumes of media and buffer solutions on a magnetic stir plate For use with Nalgene 10 and 20-liter carboys with 83B (83-mm)…

Create high-density storage with the Thermo Scientific™ Nalgene™ all-purpose stackable drawer. These drawers nest, and can be mounted under a shelf or cabinet with provided screws.

Designed for use in a wide range of applications, Thermo Scientific™ Nalgene™ filtration hardware and accessories can be used in conjunction with our various lines of filtration devices.

This durable pump easily and quickly attains and holds vacuum of 25 in. (635 mm) Hg Vacuum trigger release requires only one hand to operate and releases vacuum with the touch of an index finger Adjustable vacuum release rate Pumping rate of 15 cc/stroke and 15 psig (1.0 bar)…

Conical bottom bottles RCF 27,500 x g Withstand temperatures of -40° to +121°C Autoclavable bottles include 58 mm polypropylene sealing caps and retained silicone gaskets. Dimensions (o.d. x H, mm): 61.5 x 140.

Fits faucet with 3/ 8 inch internal pipe thread Usable for pump-off of corrosive vapors which attack metal Operates efficiently with water pressures as low as 7.5 psi for minimum water consumption Maximum free air pumping capacity of 11.5 liters per minute at a water flow rate of 6.5 liters per minute

All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

Store and ship light-sensitive reagents with Thermo Scientific™ Nalgene™ narrow-mouth opaque amber HDPE packaging bottles with closure. Ideal for diagnostics, biologicals, specialty chemicals, reagents, adhesives and veterinary pharmaceuticals, these high-density polyethylene bottles are injection…

Polycarbonate For use with Nalgene 3145 series

Wear the adjustable Thermo Scientific™ Nalgene™ Polycarbonate Faceshield over safety glasses. With an optically clear window made of 1/16" (1.5mm) thick polycarbonate, this faceshield provides impact protection as well as protection from UV light in the 200-360nm range. It is…

Conduct secondary containment of biohazardous waste with Thermo Scientific™ Nalgene™ Biohazardous Waste Containers, which feature convenient one-step sterilization-no need to remove the bag. A port opening in the cover allows for one-handed disposal of materials, limiting exposure to infectious…

Ideal for temporary waste containment Easy-snap safety latch on lid Lid/vent system reduces volatile emissions Wide mouth funnels for easy pouring Safer than glass HDPE and PTFE material construction resists most common lab solvents, acids and bases. Removable neck screen…

Polycarbonate bottles RCF to 27,500 x g Withstand temperatures of -135° to +135°C Round bottoms Autoclavable (autoclaving shortens bottle life). Include 38 mm polypropylene caps. Dimensions (o.d. x H, mm): 61.7 x 136.

Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

High-density Polyethylene bottles RCF to 8,000 x g Withstand temperatures to -100°C Flat bottoms HDPE bottles are for use with refrigerated centrifuges. Bottles include 43 mm polypropylene screw caps. Dimensions (o.d. x H, mm): 61 x 128.

Closure with Silicone Grommet for Nalgene # 2227-0020

Designed for staining, fixing, destaining and handling electrophoresis gels and blotting membranes Usable on a shaker Two sizes accommodate 100 x 100 and 200 x 200 mm gels Holds 500 to 750 mL liquid Cover reduces evaporation and spillage Integral drain plug allows for easy…

Teflon® FEP Bottles RCF to 4,000 x g Withstand temperatures from -100° to +150°C Flat bottoms Autoclavable bottles have an 80% capacity (approx. 200 mL) in refrigerated centrifuges. Bottles include 38 mm Tefzel® ETFE screw caps. Dimensions (o.d. x H, mm): 62 x 122.

Thermo Scientific™ Nalgene Fernbach Culture Flask is constructed of durable, transparent polycarbonate, and provides a wide surface area desirable for culturing in liquid media, increasing aeration for better growth. Break-resistant, transparent polycarbonate; safer than glass…

Clearly view contents with the transparent PC cover of the Thermo Scientific™ Nalgene™ Polypropylene Desiccator with Stopcock. Lighter in weight than glass, the robust polypropylene body is compatible with all solid desiccants and protects against breakage. This desiccator is for room…

Nalgene™ 3/4 in x 1/2 in Mini Hose Barb Connector is an autoclavable, polypropylene 3/4 in. (19 mm) Sanitary to 3/8'' Hose-barb adapter. It adapts sanitary ports on Cat # 2688-2075 and Cat. # 2689-2075 end caps to tubing, either 3/8- or 1/2-in. Application: For Research Use Only

Store reagents with the Thermo Scientific™ Nalgene™ Jerrican with Tethered Polypropylene Closure, featuring a space-saving design, molded-in handle and recessed grip at the bottom to provide better control when pouring. The double-ported 2243-9013 is ideal as a reservoir in automated systems. The…

Reduce the risk of carry-over contamination and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers. Excellent for freezing applications.

Easily fill and pour with Thermo Scientific™ Nalgene™ square wide-mouth HDPE bottles with closure. Featuring molded-in graduations for easy measuring and durable, uniform walls that are resistant to splitting or puncturing, these translucent bottles provide visible liquid levels and come in a…

Ensure safe and efficient liquid dispensing from tanks by using Thermo Scientific™ Nalgene™ spigots for storage tanks. Spigots are for use with Naglene™ tanks up to 100 gal. with factory installed threaded boss.

Conveniently charge and store one or three E1-ClipTip pipettes with the Thermo Scientific™ E1-ClipTip™ Charging Stands.

Compact, lightweight, light duty hand pumps Useful for numerous small volume vacuum or pressure requirements in the laboratory or field Provides vacuum of 25 inches Hg (85 kPa) Pumping rates of 15 or 36 cc per stroke Pumps are molded of polyvinyl chloride, with finger grips in squeeze-type…