SPEX SamplePrep, Chemicals
-
Pellet Die Sets and Accessories
SPEX SamplePrep13 mm Die Set: Used to form KBr disks for IR analysis. Set includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 10 tons (9.1 metric tons); weight 2.2 lbs (1 kg). 40 mm Die Set: To form 40…
-
Racks, Clamps and Holders for the 2000 Geno/Grinder
SPEX SamplePrep2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…
-
Polypropylene Skirted Disruption Tube
SPEX SamplePrepPolypropylene, self-standing 2 mL microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64 inch x 1 27/32 inch long (10 mm x 47 mm). Tube is not pre-cleaned. Grinding load per tube is 60-120 mg; mixing load 1 mL. Sold in package of 500. Ideal for fast and simple…
-
Cryo-Station
SPEX SamplePrepA holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can be placed in the Cryo-Station well to be filled and kept cold.…
-
Polyethylene Vials with Caps
SPEX SamplePrepPolystyrene Vial w/Slip-On Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn…
-
Cryogenic Gloves
SPEX SamplePrepThese cryogenic gloves are designed to protect the hands and arms from the hazards associated with ultra-cold materials. Highly recommended when operating the 6770 and 6870 Freezer/Mills. These multi-layer-insulated gloves are lightweight and flexible, allow excellent dexterity, and are comfortable…
-
Replacement Parts for 6751 Vial Set
SPEX SamplePrepSmall Stainless Steel Center Cylinder For 6751 vial set. Replaces 6751C when sample contact with plastic is not advised. Made of nonmagnetic stainless steel.
-
Mid-Size Polycarbonate Center Cylinders for 6881, 6883, and 6885
SPEX SamplePrepFor 6881, 6883, and 6885 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.
-
Pre-Loaded Polypropylene Microfuge Tube
SPEX SamplePrepPre-loaded 2 mL disruption tubes are ideal for fast and simple setup - add samples and you're ready to go. Vials are self standing, making it easier to add samples. Pre-filled with your choice of molecular biology grade silica beads, acid washed silica or zirconia beads, silica beads, or steel balls.
-
6775 Freezer/Mill®
SPEX SamplePrepThe 6775 Freezer/Mill® is a small cryogenic mill that processes samples ranging from 0.1 - 5 grams. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. The new high resolution display is user-friendly and…
-
Ceramic Grind Cyld 5/32"x5/16" angle cut
SPEX SamplePrepSmall size ceramic grinding cylinder with angle-cut ends for use with standard 5 or 15 mL centrifuge tubes. NOTE: These products are only available for sale to Domestic U.S. Customers.
-
50mL Polycarbonate Cryogenic Vials w/Screw-On Cap
SPEX SamplePrepPolycarbonate vial with screw-on cap, 1 1/8 in. diameter x 4 ½ in. (2.9 cm x 11.4 cm). Holds grinding media up to 1/2 in. Fits 2196-16-PE Holder and 2664 Cryo-Block. Grinding load per vial 20 mL. Sold as a pack of 48 Vials with 48 caps (2253C).
-
Small Cr-Free Grinding Vial Set
SPEX SamplePrepFor RoHS/WEEE testing of electronic components for chromium. End plugs and impactor are Cr-free ASTM 06 steel. Will not add Cr to sample like stainless steel components of 6751 Vial. Set includes three extra 6751C cylinders. Sample capacity 0.5 to 4.0 mL.
-
Vials and Vial Sets for the 2000 Geno/Grinder®
SPEX SamplePrepVial sets are an alternative to titer plates. These vial sets are pre-cleaned with grinding balls included. They come in sturdy carriers that have about the same footprint and height as deep-well titer plates, and fit the Geno/Grinder Clamp. Vials can be filled and sealed individually, and the…
-
Frosted Polyethylene Vial
SPEX SamplePrepFrosted polyethylene vial with screw-on polyethylene cap. The nominal outer diameter measures 1/2-inch x 2-inch long (12.7 mm x 50.8 mm). Holds one 3/8-inch (9.5 mm) stainless steel grinding ball (#2155). May be used with the Cryo-Block (#2663) and the vial holder (#2191). Grinding load per vial is…
-
Cap-Mat Sealing Mat
SPEX SamplePrepSquare well sealing mat specifically designed for the 2205 96-Well Reinforced Titer Plate. Sold in package of 50.
-
Lrg Cap Clamp Assbly - 2000 Geno/Grinder
SPEX SamplePrepNOTE: These products are only available for sale to Domestic U.S. Customers.
-
Vial/Tube Holder
SPEX SamplePrepThick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…
-
Cryo-Blocks for Cryogenic Grinding in the Geno/Grinder®
SPEX SamplePrepCryo-Blocks are made of aluminum. They hold and chill titer plates and vials to grind plant and animal tissue for nucleic acid and protein extractions. Cryo-blocks can be quickly chilled in the 2600 Cryo-Station, and will keep samples cold during grinding to preserve RNA and proteins from heat…
-
2010 Geno/Grinder®
SPEX SamplePrepThe Geno/Grinder® is an automated high-throughput plant & animal tissue homogenizer and cell lyser. It is equipped with an adjustable clamp that accommodates a full range of sample vials from 2mL to 50mL centrifuge tubes or up to six deep-well titer plates. It is specifically…
-
Freezer/Mills
SPEX SamplePrepThe 6875D Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill…
-
PrepAid® Grinding Aids and Sample Binders
SPEX SamplePrepPrepAid Propylene Glycol - (C3H8O2) (1224F31): Liquid grinding aid, 25 grams (approximately 24 mL) in dropper bottle. Instructions included. PrepAid Cellulose Binder - (C6H10O5)n (1224F32, F33): = 20 µm powder, 150 g bottle. Can be blended with sample at 10% by weight to form XRF…
-
Small Poly-Vial Grinding Vial Set
SPEX SamplePrepFor grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL
-
Microvial Set
SPEX SamplePrepMicrovial Set: Three 6753V Microvials with holder. Each 6753V has stainless steel end plugs, center cylinder and impactor. Holder contains three 6753V Microvials for simultaneous operation. Sample capacity 0.1 – 0.5 mL each. Microvial Sample Extraction Tool: For removing ground…
-
Grinding Beads for Geno/Grinder
SPEX SamplePrepMolecular Biology Grade Grinding Beads are treated to inactivate contaminating enzymes and have been tested accordingly. Low Binding Grinding Beads are coated to reduce non-specific binding of nucleic acids and proteins and are used for lysing dilute samples of cells. Acid Washed Grinding Beads are…
-
Large Polycarbonate Center Cylinders for 6801 and 6871
SPEX SamplePrepFor 6801 and 6871 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. Sold in units of 4. NOTE: These products are only available for sale to Domestic U.S. Customers.
-
Mid-Size Grinding Vial Set
SPEX SamplePrepGrinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.
-
Accessory Packages for the 6870 SPEX SamplePrep Freezer/Mill®
SPEX SamplePrepEach 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…
-
Small Polycarbonate Center Cylinders for 6751, 6761, and 6771
SPEX SamplePrepFor 6751 vial set; sold in units of 4. Also sold in units of 20. Polycarbonate is durable but should be cleaned with hot water and detergent, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.
-
Cole-Parmer CG-900 Cryo-Blade™ Cryogenic Grinder
SPEX SamplePrepThe Cryo-Blade™ is an ultra high-capacity cryogenic grinder for sample preparation and processing of up to 1 kg of sample. The Cryo-Blade automatically dispenses liquid nitrogen to allow the sample to reach cryogenic temperatures and then activates a grinding phase to pulverize samples,…
-
Ball and Vial Sets
SPEX SamplePrepPolystyrene Vial w/Slip-On Cap, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Includes slip-on polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8…
-
Small Grinding Vials Accessories
SPEX SamplePrepExtractor/Vial Opener for Small Grinding Vials: The Extractor/Vial Opener lifts 6700-series vials in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. One 6754 is supplied with each 6770 Freezer/Mill and as part of the 6870S Accessory Package. …