PerkinElmer, NEW! Life Science
-
Liquid Chromatography Laboratory Bottle Kit
PerkinElmerThe PerkinElmer contains liquid chromatography laboratory bottle kit contains a cap with PTFE insert, 1/16 Inch tubing and a solvent frit.
-
This PTFE-coated Viton o-ring, with an inner diameter of 6.07 mm and width of 1.78 mm, is used for the internal injector support adapter with ELAN 6000, 9000, DRC II, and DRC-e, and NexION 300 and 350 ICP-MS series instruments.
-
Decapper Jaw set for the High Performance Crimper. It fits standard 20 mm caps, is suitable for all steel and magnetic caps, and a wide range of seal thicknesses.
-
-
Tungsten Lamp for LAMBDA 365
PerkinElmerProvide the best wavelength coverage across the working range of the spectrometer for consistently high performance. Changing tool order N4102048.
-
Liquid Chromatography Laboratory Bottle Kit
PerkinElmerThe PerkinElmer liquid chromatography laboratory bottle kit contains a 2 Liter bottle, PTFE insert, 1 meter tubing and a solvent frit
-
-
Decapper Jaw set for the High Performance Crimper. It fits standard 11 mm caps, is suitable for all steel and magnetic caps, and a wide range of seal thicknesses.
-
Aluminum (Al) Lumina Hollow Cathode Lamp
PerkinElmerSingle Element Lumina hollow cathode lamp (HCL) for the detection of elemental Aluminum (Al). Please note that this element requires the use of a nitrous oxide-acetylene flame. Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility…
-
This baffled cyclonic spray chamber, made of borosilicate glass, is an integral part of the sample introduction system responsible for filtering the sample mist to permit appropriate droplet size distribution to reach the plasma. The spray chamber features a sand-blasted neck with EZ seal fitting…
-
-
Brownlee Aquapore conventional columns built on a 7 m, 300 Angstrom pore size silica. The OD-300 and RP-300 are reverse-phase silicas modfied with C18 and C8, respectively. AX-300 is a weak anion exchanger that is composed of a crosslinked polyethyleneimine phase bonded on the silica surface.…
-
Elite-502.2 Columns are fused silica columns are for analysis of volatiles with EPA 502.2
-
Elite 624 capillary column 30m x 0.45mm, 2.55µm
PerkinElmerTemperature range -20°C to 240°C Equivalent to USP G43 phase
-
High-Purity Brass Regulator (Single Stage), CGA-350, Use:H2 and Ar/CH4 mixes. PerkinElmer offers both single- and dual-stage regulators. All regulators are supplied with standard CGA fittings. We recommend that you consult your local gas supplier first to determine the proper tank regulator…
-
Graphite/vespel ferrules (15% graphite/85% polyimide) are recommended for use with GC/MS systems. Best choice for glass columns and polyimide-coated, fused silica capillary columns. Can usually be removed easily from column. Temperature limit is 350C. Note: 0. 25-0. 32mm inner diameter. columns…
-
User-installable spare mid-IR source lamp for Spectrum One/65/100/400/Frontier MIR Systems.
-
The GemCone low-flow nebulizer permits lower nebulizer flow rates, useful for spectral lines with high excitation energies and for providing a more robust plasma. The nebulizer is optimized for low nebulizer gas flow for use with cyclonic spray chambers. It requires an end cap (N0680504) for use…
-
The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization effciency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts, and conferring signifcant…
-
-
Column Cutter
PerkinElmerThe PerkinElmer column cutter is made from ceramic and is mainly used in laboratory and manufacturing factories.
-
Brownlee Spheri-5 Cyano is based on a small pore silica, monofunctional, optimized for separating small molecules. Requires holder P/N 07150014 without guard column or P/N 07150016 with a guard column.
-
This one-piece quartz torch, marked blue, with a PVDF o-ring free holder, has a 2.0 mm injector integrated directly into the torch. It's included in the Base Configuration's Sample Introduction Kit (N8150034).
-
System 2 electrodeless discharge lamp for the detection of elemental Bismuth (Bi). Note: PinAAcle ™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. Electrodeless Discharge Lamps for greater brightness (EDLs) are…
-
Tubing Gas Chromatography Union
PerkinElmerThe PerkinElmer gas chromatography union with an inside diameter of 1/8 Inch is compatible to use with brass tubing.
-
This o-ring-free baffled cyclonic spray chamber, made of borosilicate glass, comes standard with NexION Q, X, and D models. It relies on momentum to ef ciently and quickly remove the larger droplets from the sample mist decreasing any opportunity for occlusion or agglomeration of the smaller…
-
Adjustable Torch Mount Assembly for Avio 200
PerkinElmerThe adjustable torch mount assembly is included in the Adjustable Torch Body Assembly (N0790138). This assembly includes: Torch Mount, Qty 1. (N0791285) Disk Magnet, Qty. 1 (09200515)
-
Temperature range -60oC to 200 oC
-
AUTOSAMPLER STARTER KIT
PerkinElmerThis kit contains: 5mL x 0. 63mm outer diameter syringe 2mL clear sample vials (144) 2mL amber sample vials (100) blue crimp caps with septa (100) green crimp caps with septa (100) red crimp caps with septa (100) septa for waste/wash vials (100) crimper - 11mm decapper - 11 mm …
-
FPD Test Mix
PerkinElmerThe PerkinElmer FPD test mix with a 3-1 mL is mainly used in laboratory and manufacturing factories.
-
PerkinElmer's HybridXLT torch is the latest addition to the family of PerkinElmer genuine sample introduction components. The new ceramic/quartz hybrid design provides the highest performance for your Optima ICP-OES 8x00 spectrometer. This new torch has an extended lifetime of up to 10x your…
-
Concentric Quartz Nebulizer, MEINHARD Type A3
PerkinElmerThe MEINHARD concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control.