Owl Separation Systems, Mutagenesis & Cloning
-
Owl® Side Clamp
Owl Separation SystemsThe Owl® side clamp is suitable for use with Owl™ P10DS dual gel electrophoresis system.
-
The Stretch Otter™ Sequencing Gel Caster
Owl Separation SystemsOwl SGC-2 Sequencing Gel Caster uses an innovative method for casting that is so simple you can cast bubble free gels in less than 3 minutes. A horizontal plate sliding procedure, capillary action drawing gel between plates, and surface tension, keeps the gel from leaking. No taping or special…
-
Owl® Spacer Placer
Owl Separation SystemsThe Owl® spacer placer is used in gel assembly for spacers alignment. It is suitable for use with JGC-3 gel casting system.
-
Owl® External Caster
Owl Separation SystemsThe Owl® external caster is suitable for use with Owl™ D3 series horizontal electrophoresis system. Choose from various Thermo Scientific™ Owl™ D3-14 System Replacement Parts, including UVT gel tray, gaskets and external caster. For use with the Owl D3-14 System
-
Owl™ Vertical Electrophoresis System Apparatus
Owl Separation SystemsThe Owl Separation Systems apparatus measuring 6.7 Inch x 5.1 Inch x 5.5 Inch, is suitable for use with vertical electrophoresis system.
-
Replacement Gasket
Owl Separation SystemsThe Owl® replacement gasket is suitable for use with Owl™ D3 series horizontal electrophoresis system.
-
Owl® Buffer Drain Bottle
Owl Separation SystemsThe Owl Separation Systems buffer drain bottle is suitable for use with S4S aluminum-backed sequencer system. It is used to store and dispose buffer solution. Achieve optimal manual sequencing with Thermo Scientific™ Owl™ S4S Aluminum-Backed Sequencer System Replacement Parts, for use with the…
-
Replacement Gasket
Owl Separation SystemsThe Owl® replacement gasket is suitable for use with Owl™ EasyCast B1 mini gel electrophoresis system.
-
Owl® Spacer Set
Owl Separation SystemsThe Owl® spacer set is mainly used to cast gradient gels. It is suitable for use with JGC-2 and P1-CST gel casting systems. Cast one to five gels simultaneously with Fisherbrand™ P1-CST Multiple Gradient Gel Caster, one of the simplest devices to cast gradient gels With an external gradient…
-
Large Gel System Replacement End Gates
Owl Separation SystemsThe Thermo Scientific large gel system replacement end gates are suitable for use with Owl™ A2 and A5 large gel electrophoresis system. They are suitable for use in research facilities and chemical laboratories.
-
Owl™ Spacer Set
Owl Separation SystemsThe Owl Separation Systems spacer set contains two sides and a bottom to constitute a triangular design. It is used in medicinal clinics and facilities for research applications.
-
Owl® Spacer Set
Owl Separation SystemsThe Owl® spacer set is suitable for use with SGC-2 sequencing gel casting system. Choose from two sizes for manual sequencing with Thermo Scientific™ Owl™ Spacer Sets for Aluminum-Backed Sequencers
-
Replacement Gasket
Owl Separation SystemsThe Owl® replacement gasket is suitable for use with Owl™ EasyCast B1A mini gel and A2-OK multi gel electrophoresis system.
-
Owl™ Spacer Set
Owl Separation SystemsThe Owl Separation Systems spacer set contains two sides and a bottom to form a triangular design. It is used in medicinal clinics and facilities for research purposes.
-
Owl® Spacer Placer
Owl Separation SystemsThe Owl® spacer placer is used in gel assembly for spacers alignment. It is suitable for use with JGC-4 gel casting system.
-
Owl® Side Clamp
Owl Separation SystemsThe Owl® side clamp is suitable for use with Owl™ S3S aluminum-backed sequencer system. Achieve optimal manual sequencing with Thermo Scientific™ Owl™ S3S Aluminum-Backed Sequencer System Replacement Parts, for use with the Owl™ S3S Aluminum-Backed Sequencer System
-
Owl™ EasyCast™ External Gel Casting System
Owl Separation SystemsReplace your UVT gel tray, gaskets and external casters with Thermo Scientific™ Owl™ EasyCast™ B1A Mini Gel and A2-OK Multi Gel System Replacement Parts, for use with EasyCast B1A and A2-OK Multi Gel Mini Gel Systems. External caster only Tray not included
-
Notched Glass
Owl Separation SystemsUse Thermo Scientific™ Owl™ Sequencing System Spacer Sets and Glass Plates with Owl™ Sequencing Gel Casting Systems.
-
Owl® External Caster
Owl Separation SystemsThe Owl® external caster features gasketed end gates, which ensures leak proof seal without tape. It is suitable for use with Owl™ D2 wide gel electrophoresis system. Replace the UVT gel tray, gaskets and external caster with Thermo Scientific™ Owl™ D2 Wide-Gel System Replacement Parts, for use…
-
Blank Glass
Owl Separation SystemsUse Thermo Scientific™ Owl™ Sequencing System Spacer Sets and Glass Plates with Owl™ Sequencing Gel Casting Systems.
-
Blank Glass
Owl Separation SystemsUse Thermo Scientific™ Owl™ Sequencing System Spacer Sets and Glass Plates with Owl™ Sequencing Gel Casting Systems.
-
Owl® Spacer Set
Owl Separation SystemsThe Owl® spacer set is suitable for use with S4S and S3S T-Rex™ sequencing vertical systems and SGC-1 and SGC-2 sequencing gel casting systems.
-
Owl™ UVT Gel Tray
Owl Separation SystemsThe Owl® UVT gel tray measuring 14 cm x 23 cm, is suitable for use with Owl™ D3 series horizontal electrophoresis system.
-
Electrophoresis System Wall Comb
Owl Separation SystemsEliminate comb assembly with Fisherbrand™ D3-14, A3-1 and A6 Wide-Gel Electrophoresis System Combs. These microwell and wall combs are heavy-duty, one-piece units for use with the D3-14, A3-1 and A6 wide gel electrophoresis systems.
-
UVT Gel Tray
Owl Separation SystemsThe Thermo Scientific UVT gel tray is suitable for use with A2 and A5 large gel horizontal electrophoresis system. It is mainly used in research facilities and chemical laboratories. It features sturdy construction which ensures durability.
-
Owl® Side Clamp
Owl Separation SystemsReplace blocking plate, buffer chambers, lid or side clamps with Thermo Scientific™ Owl™ P8DS Gel System Replacement Parts; for use with the Owl™ P8DS Gel System.
-
Notched Glass
Owl Separation SystemsUse Thermo Scientific™ Owl™ Sequencing System Spacer Sets and Glass Plates with Owl™ Sequencing Gel Casting Systems.
-
Centipede Wide Format System 23.5 X 14 cm
Owl Separation SystemsOwl D3-14 Wide Gel System incorporates Owl’s EasyCast design with an external caster. The UVT gel tray is fitted with a gasket which allows the tray to fit snugly into the external gel caster to provide a leakproof seal without tape. Sample loading is greatly enhanced using micro well pipette…
-
Owl® Buffer Drain Bottle
Owl Separation SystemsThe Owl Separation Systems buffer drain bottle is suitable for use with S3S aluminum-backed sequencer system. It is used to store and dispose buffer solution. Achieve optimal manual sequencing with Thermo Scientific™ Owl™ S3S Aluminum-Backed Sequencer System Replacement Parts, for use with the…
-
Owl® Spacer Set
Owl Separation SystemsThe Owl® spacer set is mainly used to cast gradient gels. It is suitable for use with P81, P82, P8DS vertical electrophoresis systems and JGC-4 and P7-CST gel casting systems. 2 sides,1 bottom Cast one to five gels simultaneously with the Thermo Scientific™ Owl™ P7-CST Multiple Gradient Gel…
-
Owl® Micro Well 25-Tooth (1X) Comb
Owl Separation SystemsThe Thermo Scientific™ Owl® micro well 25-tooth (1x) comb measuring 1 mm x 7.5 mm, is suitable for use with D3-14, A6 and A3-1 wide gel horizontal electrophoresis system. It features sturdy construction which ensures durability.
-
Replacement Gasket
Owl Separation SystemsThe Owl® replacement gasket is suitable for use with Owl® P9DS-1, P9DS-2 and P9DS-3 dual gel vertical electrophoresis system.