Kemtech America Glass Joints & Adapters
-
Synthware Vacuum/Inert Gas Adapters with Ball Joint
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection is at a 90 degree angle to the spherical ball joint.
-
SYNTHWARE Inlet/Thermometer Adapter
Kemtech AmericaThermometer Adapter, Microscale, Synthware, Joints: 14/10, Thermometer OD: 5.0-7.5mm, supplied with one compression cap and one Viton O-ring.
-
SYNTHWARE Vacuum Takeoff Adapter
Kemtech AmericaVacuum Takeoff Adapter, Microscale, Synthware, Joint: 14/10, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
SYNTHWARE Solvent Still, Built-In Condenser
Kemtech AmericaSolvent Still, Built-In Condenser Capacity: 125mL Joints: 24/40 Threaded Side Port: 14/10
-
Synthware Vacuum/Inert Gas Adapters, 90°
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection is at a 90 degree angle to the standard taper inner joint.
-
Synthware Vacuum/Inert Gas Adapters
Kemtech AmericaAllows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection is at a 90 degree angle to the standard taper inner joint.
-
SYNTHWARE Cow-Type Distilling Receivers with Hose Connection
Kemtech AmericaCow-type design having three receivers spaced 40° apart. 105° angle between top outer joint and lower inner joins.
-
Synthware Vacuum/Inert Gas Adapters with Glass Stopcocks
Kemtech AmericaSynthware vacuum or inert gas adapter has a T-bore glass stopcock allowing vessels with a standard taper outer joint to purged and evacuated. The stopcock has a constant pressure retention device and a 4 mm bore.
-
SYNTHWARE Shortpath Distilling Head for Volatile Distillants
Kemtech AmericaWith the condenser being a combination of a cold coil and Leibig. Top outer joint is a 10/18 for use with a 50mm immersion thermometer. With Vigreux Indentations.
-
SYNTHWARE Hickman-Hinkle Still Head with Side Port
Kemtech AmericaHickman-Hinkle Still Head, with Side Port, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
Synthware Bushing Adapters
Kemtech AmericaSynthware bushing adapters allow for compact assemblies of dissimilar standard taper joints.
-
-
SYNTHWARE Short Path Distilling Head with 24/40 Joint
Kemtech AmericaOne-piece design for easy set-up. For the best result, use D272440 distillation receiver. To be used with 25mm immersion thermometer.
-
SYNTHWARE Dean Stark Distillation Receivers
Kemtech AmericaFor easy separation of water from reaction or distillation system.
-
SYNTHWARE Solvent Distilling Heads
Kemtech AmericaSolvent Distilling Head Capacity: 250, 500, and 1000mL available Joints: 14/20 and 24/40 available Sampling Port: 14/20. Heads feature a 2mm double oblique stopcock bore
-
Synthware Vacuum Filtration Adapters
Kemtech AmericaUsed with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.
-
Synthware Vacuum Adapters with Outer Joints & Glass Stopcocks
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper outer joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
SYNTHWARE Snyder Distillation Column
Kemtech AmericaSnyder Distillation Column, 3 Section Top Outer Joint: 24/40 Lower Inner Joint: 24/40 Column Height: 150mm Overall Height: 300mm For use with Kuderna-Danish flask.
-
Synthware Flushing Adapters
Kemtech AmericaSynthware flushing adapter with PTFE T-bore stopcock. Adapter has a top outer and lower inner standard taper joints of the same size. Allows for the evacuation and transfer of product into another vessel while under an inert gas.
-
Synthware Flow Control Adapters with Metering Stopcock, Straight
Kemtech AmericaSynthware flow control adapter with metering stopcock. Adapter has a 2mm PTFE metering stopcock between top outer and lower inner standard taper joints. Permits flow control of fluids between apparatus.
-
Synthware Inlet Adapters with Extra Coarse Discs
Kemtech AmericaSynthware inlet adapter with an extra coarse porosity fritted disc between the serrated hose connection and the standard taper inner joint. The disc prevents solids from being introduced into the reaction system during liquid transfer.
-
SYNTHWARE Solvent Still Head with Drainage Port
Kemtech AmericaSolvent Still Head Capacity: 500 and 1000mL available Top Joint: 24/40 Bottom Joint: 24/40 and 29/42 available Side Joint: 14/20 Drainage Port Joint: 14/20
-
SYNTHWARE Hickman Still Head
Kemtech AmericaHickman Still Head, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
SYNTHWARE Peptide Synthesis Vessels, Solid Phase
Kemtech AmericaPeptide Synthesis Vessel, Solid Phase, Synthware, Capacity: Available in sizes ranging from 10-50mL, Frit Porosity: Coarse or Medium, Frit Diameter: Available in sizes ranging from 15-25mm, GL Thread: 14 or 25 available, Arm OD: 8mm, Supplied with a PTFE lined cap and straight bore PTFE stopcock…
-
SYNTHWARE Graduated Distillation Receivers with Hooks
Kemtech AmericaCentrifuge tube shaped receiver with an upper standard taper joint.
-
Kjeldahl Trap Adapters
Kemtech AmericaSynthware distillation adapter with Kjeldahl trap. With two standard taper inner joints that are parallel and at a 75 degree angle to the connecting tube. Distance between joints is approximately 200mm.
-
Synthware Flow Control Adapters with Metering Stopcock, 90°
Kemtech AmericaSynthware flow control adapter with metering stopcock. The serrated hose connection is turned 90 degrees to the standard taper inner joint. Provides on/off control with the main stopcock and precise control of liquids or gasses with the needle valve.
-
SYNTHWARE Vacuum Jacketed Distilling Heads
Kemtech AmericaDistilling Head, Vacuum Jacketed Thermometer Joint: 10/18 Joints: 14/20 or 19/22 available For use with 25mm immersion thermometer.
-
Synthware Inert Gas Adapters with 2 Hose Connections
Kemtech AmericaSynthware Inert Gas Adapter has two hose connections 180 degrees from one another to provide a flow of inert gas over the apparatus. The joints are standard taper inner joints.
-
Synthware Vacuum Distilling Adapters
Kemtech AmericaWith two standard taper inner joints that are parallel and at a 75 degree angle to the connecting tube. Distance between joints is 100mm.
-
Similar to D451414-series but with the uptake tube vacuum jacketed to improve distillation performance. The jacket eliminates the possibility of condensation or recrystallization of distillate in the sidearm. With 2mm PTFE stopcock.
-
Synthware Distillation Adapters, Vigreux
Kemtech AmericaSynthware Vigreux distillation connecting adapter. Indenstations in lower section improve liquid/vapor contact. The standard taper top outer joint accomodates a 76mm immersion thermometer. Bottom and side joints are standard taper inner joints.