The Metal hub is made from nickel plated brass. Needles are available from 33 to 10 gauge. This hub makes the most rigid connection to the needle making it perfect for repetitive septum piercing. Metal hub needles are compatible with PTFE Luer Lock (TLL) syringes. All needles are sold in six-packs…

The Hamilton 700 series 10 uL syringe is compatible with small removable needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a pressure rating of up to 2000 psig and temperature rating of up to 10 to 115 degree C.

Hub Large RN Gauge 22s gauge Length 2 inch (51 mm) Point Style 5 Autoclavable Yes Sales Quantity 6 needles per pack

The Large Hub Removable Needle (RN) is compatible with RN syringes from 250 µL to 10 mL and all SampleLock syringes. Needles are available from 26s to 20 gauge. All needles are sold in six-packs and the standard needles are 51 mm long. For all custom needles, the length and point style will need to…

Hamilton Company offers a calibration service for precision syringes and Digital Syringes. A Certificate of Calibration is provided with the product and the procedure is performed with an unbroken chain of calibrations traceable to N.I.S.T. Calibrated precision syringes are available only at…

Metal hub (nickel plated brass) needles can be used with TLL syringes and LT or TLL connectors. The needles are 304 stainless steel (sst.). Standard needle length is 2" / 51 mm. Metal hub (N) needles are available in convenient six packs. Custom needle lengths and point styles are available.

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

Volume 1 µL Termination Knurled Hub (KH) Needle Knurled Hub (KH) Gauge 25s gauge Point Style 3 Needle Length 2.75 inch (69.9 mm) Needle Inner Diameter 0.005 inches (0.13 mm) Needle Outer Diameter 0.019…

The Kel-F hub is made from CTFE plastic. Needles are available from 31 to 10 gauge. This hub is recommended when connecting to a rigid male Luer like a Luer Tip (LT) syringe because the plastic is more pliable and creates the best seal. All needles are sold in six-packs and the standard needles are…

This tubing is cut to length but the ends are not polished and the tubing is not passivated like a typical finished needle.

Guard columns can provide many benefits when used upstream from an analytical, preparative, or semi-preparative column. Guard columns are typically chosen to have the same packing as the primary column. Any compounds or particulate material that would block the frits or highly adsorb to the primary…

The Hamilton seal kit is suitable for use with 5 uL/10 uL SoftGrip single channel pipette models.

Slip plastic tubing over the end of the connector to quickly adapt the tube to a 1/4-28 connection.

The Hamilton barrel is suitable for use with 10 mL 1010RN syringe models.

The LaChrom Elite Autosampler represents a new standard of performance in HPLC. Whether you need high sample capacity, extreme precision, ultra-low carry over, or rapid cycle times between injections, the LaChrom Elite models excel.

The Hamilton MCGL series syringe is suitable for use with 0.2 mm needle.

The Hamilton 700 series 5 uL syringe is suitable for use with small removable needles. This syringe model offers SST, borosilicate glass fluid path. It can be used at a pressure rating of up to 2000 psig (137.9 bar) and temperature rating of up to 10 to 115 degree C.

The Hamilton barrel is suitable for use with S0500 super syringe models.

The Hamilton compression fitting includes 5 top ferrules, 5 bottom ferrules and a RN nut. Connect any 1/16th inch (1.6 mm) outer diameter PEEK tubing to a 100 µL or smaller removable needle (RN) syringe

The Hamilton flange screw is suitable for use with PB 600-1, 1005 and 1010 syringe models.

The Microlab 600 Controller comes standard with the Basic functionality. For Advanced Controller functionality, the Basic to Advanced Controller Upgrade Kit (SD card) must be purchased separately.

The Hamilton 1000 series 50 mL syringe is suitable for use with metal (N) or kel-F needles. This syringe model offers borosilicate glass, PTFE and PCTFE fluid path. It can be used at a pressure rating of up to 100 psig and temperature rating of up to 10 to 80 degree C.

The Hamilton PRP-3 replacement guard cartridge is suitable for use in reversed phase separation mode.

Kel-F hub (KF) needles can be used with Luer Tip (LT) and PTFE Luer Lock (TLL) syringes and connectors. Standard needle length is 2" / 51 mm. Kel-F hub (KF) needles are available in convenient six packs. Custom lengths and point styles are available. These needles are available from 10 - 31 gauge.

The Hamilton luer to small hub removable needle adapter is suitable for use with 7000 series syringe models. Metal luer hub and removable needle hub combined in a single needle Includes one RN to luer needle and sealing ferrule

The Hamilton 700 series 10 uL syringe is compatible with small removable needles. This syringe model offers SST and borosilicate glass fluid path. It can be used at a pressure rating of up to 2000 psig and temperature rating of up to 10 to 115 degree F.

The PRP-h5 derives its hydrophobic functionality from a pentafluorinated polymer bead, delivering a selectivity difference from standard silica C18 stationary phases. This gives chromatographers the desired retention characteristics necessary for certain sample types. This difference is especially…

Volume 50 µL Syringe Type Gastight Syringe Series 1700 Termination Diluter PTFE Luer Lock (D) Needle No Needle Available Fluid Path Borosilicate glass, PTFE, PCTFE Plunger Style Instrument Plunger Stop (X) …

This tubing is cut to length but the ends are not polished and the tubing is not passivated like a typical finished needle.

The Hamilton plunger cap in sandstone color is suitable for use with 50 uL SoftGrip single channel/multi-channel pipette models.

The Metal hub is made from nickel plated brass. Needles are available from 33 to 10 gauge. This hub makes the most rigid connection to the needle making it perfect for repetitive septum piercing. Metal hub needles are compatible with PTFE Luer Lock (TLL) syringes. All needles are sold in six-packs…

Gastight Syringes For HP 7683/7673 GC Autosamplers…