A thin film of pure formvar resin coats a slotted grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid.

Slide coating cup with stand and cleaning brush. Glass cup is Pyrex and is designed to conserve expensive autoradiographic emulsion when coating glass slides. Needs only 1/4 the volume of solution previously required. Single piece holder permits immersion in a water bath and provides a stable…

Disposable Adhesive Grids Convenient - Easy-to adhere stickers having side-by-side twin grids (20mm x 20mm each with 1mm line spacing) for microscope slides. Count or measure cells and estimate the size or length of microscopic or semi-micro objects Versatile - Compatible with…

These slide warmers are ideal for use in cytology, histology, pathology and biology for paraffin tissue section mounting. Available in two sizes. Thermostatic heat control Anodized black surface provides contrast LED temperature display, both set temperature and display temperature …

For Immunocytochemistry and In Situ Hybridization Probe Clips form a sealed chamber when pressed to a slide containing a specimen, holding reactants in place and preventing any evaporation and reactant loss. Made of a silicone gasket bonded to optically clear, hydrophobic plastic. …

Disposable Liquid-Holding Wells Convenient Pre-cut, twin adhesive well stickers (1cm diameter) firmly adhere to microscope slides. Examine specimens with or without cover slips. Available in depths of 0.25mm and 0.50mm. Multiple Applications Examine or count tissue culture cells,…

A thin film of pure formvar resin coats a square grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid.

A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid.

Stainless Steel slide tray racks that accept aluminum slide trays. The rack alows air to circulate over the slides and both sizes of racks hold up to 100 slides. The aluminum slide trays have elevated ridges to separate 76 x 26mm slides and finger holes for easy removal. Ideal for drying fresh…

Types A & B, with viscosities of 150 and 1250cSt respectively, meet these requirements. The greater the gap between cover glass and objective, or condenser and slide, the more desirable high viscosity becomes. For extremely large gaps, type NVH should be used. All Cargille Immersion Oils can be…

A thin film of pure formvar resin coats a hexagonal grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid.

A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid.

A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid.

A reliable support specimen grid source. Features: well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. Newly introduced are copper grids with palladium plating. This plating offers better grid strength and avoids tarnishing. Standard Square…

A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid.

A thin film of pure formvar resin coats a thin bar square grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid.

A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid.

A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections.

A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All film is laid on the shiny

A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All of our film is laid on the shiny side of the grid.

A thin film of pure formvar resin coats a thin bar hexagonal grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid.

A thin film of pure carbon deposited on one side of the grid. The thickness range is as follows: Standard: Approx. 5-6nm Ultra-Thin (UL): 3-4nm Thick (TH): 10nm Extra Thick (ET): 20-30nm NOTE: All film is laid on the shiny

A thin film of pure formvar resin coats a single hole grid. The thickness range is as follows: Standard: Approx. 10nm Ultra-Thin (UL): 5-6nm Thick (TH): 15-20nm Extra Thick (ET): 25-50nm NOTE: All of our film is laid on the shiny side of the grid.

A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections.