These opaque leakproof bottles are excellent for storing photosensitive materials, either liquid or solid. A LDPE neck insert plug provides maximum security. The easy grip LDPE screw closure contains tag holes and may be wired securely to either of 2 shoulder holes. Sloping shoulders reduce any…

Our stir bars feature ALNICO V magnetic cores which are one of the most powerful permanent magnet alloys available. Stir bars should not be stored in a random mass, or dropped on a hard surface especially steel. Stir bars should be stored in pairs to maintain magnetic strength.

Stir Bar Micro, 1.5X15 mm ( 1210C97 ) Product Dimensions (l x w x h) : 0.591x0.073x0in 15 mm length. For stirring  test tubes, micro-beakers, etc... Covered with polytetrafluoroethylene white resin. Stir Bar Micro, 1.5X8 mm ( 1210C98 ) Product Dimensions (l x w x h) :…

Manufactured from chemically-resistant polypropylene Specifically designed for easy effective sampling of 55 gallon drums or vessels with openings as small as 2 inch id The 100 mL bottle easily passes through the opening for quick filling The 4-inch T-design handle prevents dropping of sampler…

Liquid Sampler 3' 500 mL ( 1212X48 ) Product Dimensions (l x w x h) : 0x2.937x45.75in 3' handle sampler with 500 mL bottle. Manufactured from chemically resistant high density polyethylene this sampling device is perfect for corrosive environments and for hard to reach places.…

Scoops. Flat Bottom. High-density Polyethylene. 25 mL liquid capacity. Heavy duty scoops with many industrial and laboratory applications. Suitable for liquids and powders.

Leakproof bottles are ideal for a wide range of liquids and solids High performance polypropylene bottle with polypropylene screw cap Autoclavable Wide mouth for easy filling Wide mouth bottles, constructed of high-clarity polypropylene, are available in a full range of sizes…

Autoclavable at 121°C Polypropylene 500mL bottle fitted with one-piece PP closure (34mm neck ID) Closure features precision jet-tip aperture for fine control Dimensions 163mm height x 75mm diameter

Product Dimensions (l x w x h) : 3.31x1.09x0.5in Spot Plate LDPE. These spot plates have three depressions 21mm x 7mm deep. Tray is 28mm x 85mm. Made of low density polyethylene and will withstand temperatures to 80º C.

Leakproof, rigid and translucent these high density polyethylene 2000 mL wide mouth lab bottles have excellent chemical resistance. Ideal for storage and handling of liquids or solids. Made with FDA approved resin for non-contaminating storage of chemicals and food grade products. Bulk packed with…

These low density polyethylene bottles are supplied with a ribbon applicator cap. The specially designed spout dispenses a free-flowing ribbon 5/16" wide. Ribbon may be adjusted from thin to thick spread by positioning on cap. The sealer top tongue completely seals the dispenser spout.

High density polyethylene stirring paddle and handle available in stock and custom sizes. Small size plastic stir paddle is for use in stirring small volumes or for chemical mixing in photographic work. The larger size paddles are excellent for mixing liquids in large tanks or vats.

Leakproof, rigid and translucent narrow mouth Polypropylene lab bottles can be autoclaved, have excellent chemical resistance and are ideal for storage and sampling of liquids or solids. Bulk packed bottles come with closures included but not attached.

Graduated Plastic Dipper 2 Pour spouts PVC hand grip on 1" diameter HDPE rod 500mL & 1000mL beaker welded to the rigid handle at a 45º angle High density polyethylene dipper for removing samples from large tanks. Made in the USA, these plastic dippers are lightweight…

Large narrow mouth bottles made of low density polyethylene. Excellent chemical resistance. Heavy wall thickness for durability, yet a fraction of the weight of glass. Maximum temperature of low-density Polyethylene is 80°C.

Graduated Square Bottle, Wide Mouth High-Density Polyethylene, Amber 2L ( 1212Y25 ) Product Dimensions (l x w x h) : 4.557x3.574x9.75in Amber graduated 2 liter rectangular bottle , high-density Polyethylene for easy storage of bottles on shelves. Enhanced stability when in use with an…

An ideal bottle  for water and oils as there are no shoulders to restrict  flow. They are graduated and can be used as rough measures. Molded in area for tag to allow for easy identification. Conforms to DlN 13316 and 168.

Clear as glass, these PVC bottles have good chemical  resistance and are lightweight. Screw closures are  pulp and vinyl lined bakelite. Temperature range is  from -20°C to 80°C.

Designed for heavy industrial and laboratory applications, the round shape design facilitates complete transfer of the sampling material. Suitable for food grade products.

Test Tube Supports for 10, 13, 16 mm tubes. Acrylic units have clear shelves with white sides and bases.

These stylish sloped shoulder wash bottles feature an acute angled "swan neck" dispensing spout. Maximum temperature of low-density polyethylene is 80°C. Washbottle 250 ML Water (1210A92 ) Product Dimensions (l x w x h) : 0x2.153x8.625in Printed with a water…

Translucent, low-density Polyethylene wide mouth bottles with leakproof polypropylene screw closure. Made from FDA approved resin for use with food products. Bottles have greater flexibility and impact resistance than high-density Polyethylene bottles.

The 250ml and 500ml natural wash bottles have a integrally molded tube with removable jet tip and a separate  plain cap. The shape is a squared-oval for easy grip and improved stability. Available with natural PP  closures. Can also be supplied with the tube end sealed  for…

Supplied with PP closure, this 500mL Pump Dispensing Bottle is highly suitable for dispensing liquids and creams. Wide surface area is easily labeled with contents. Pump Dispensing Bottle is suitable for food grade products. Dimensions: 3” diameter x 8.25” height

Easy-squeeze 250ml and 500ml wash bottles with integrally molded tube. Requires only gentle pressure to eject and accurately  direct the liquid. The dispensing tip can be cut back  to increase the flow rate. Maximum temperature of  LDPE is 80°C.

The spray bottle that even works upside down! Uninterrupted spraying Parts in contact with media made of PP, PE, silicon and stainless steel Nozzle diameter 0.6 mm and continuously adjustable Amount sprayed per stroke: 1.2 mL ± 0.1 These unique reusable…

Safe and convenient method of carrying bottles Carrying handle 1” in diameter 1784M50 is non-compartmentalized; overall dimensions: 14” x 6 7/8” x 6”. 1784M52 has six compartments measuring 4 1/2” x 3 3/8” x 6” each. 1784M54 has two compartments…

Translucent polypropylene. Resistant to breakage. Blue graduations, ring mark and inscriptions. Ideal for fluoro and silicate chemistry. Recommended cleaning with mild alkaline detergent up to 60°C. Note: Exposure to temperatures above 60°C may cause volume changes.

Wide mouth GHS wash bottles featuring the patented DripLok® vapor venting valve that prevents solvent drips Custom write-on wash bottles are printed in English only for 250 and 500mL and 3 languages for 1000mL (English, French, German) Choose from four solvent labels, all including the…

Dynalon’s new versatile modular liquid handling series fits all your needs. Whether sampling from drums or rail cars, stirring vats or dipping chemicals from a bath... we have the configuration to fill your requirements. Components are available piecemeal, as intuitive kits or buy the…

These wide mouth lab bottles are available in translucent or amber rigid high density polyethylene. The amber lab bottles can be autoclaved. Bottles are ideal for storage and handling of liquids or solids. Translucent bottles are made with FDA approved resin for non-contaminating storage of…