Clear or amber Range of sizes Teflon-lined caps The organic series consists of clear and amber glass vials with solid or open top closures. The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone…

Screw caps Autoclavable Rubber lined caps Amber sample vials have solid top black phenolic caps that are Teflon® faced with 14B rubber liners. Cap material is black phenolic and cap and liners are autoclavable. With these vials, Teflon® and Type 1 glass are the only surfaces that will make…

BOD Bottle Racks are constructed of coated wire. 1215X63 is holds up to twenty 60 mL BOD Bottles and 1220C96 hold up to twelve 300 mL BOD Bottles. Rubber Leash For BOD Stopper (1234R64) ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter…

ID Viton Tubing

These economically priced sample vials are conveniently packed in two shrink-wrapped packs of 100 vials. This packaging reduces contamination from corrugated material found in traditional packaging. The clear vials are manufactured from Wheaton 33 low extractable borosilicate glass that conforms to…

With attached screw caps Ideal for field or general laboratory use

Autoclavable Chemical resistant Gas impermeable Acceptable sterilization methods: autoclave, dry heat, chemical.

Flint glass, with slight shoulder Tight-fitting polyethylene cap, with thumb tab, can be removed and applied easily with same hand in which vial is held. Cases are constructed to store jars neatly, with caps attached, in partitioned trays that can be pulled out as drawers.

Fitted with rubber liners Borosilicate glass, Wheaton “200” glass Consists of screw neck vials and attached 2386Q20 series cap fitted with rubber liners Packaged in Wheaton Lab File® carton containing two pull-out cardboard drawers. Listings show height x diameter.

The Organic series consists of clear and amber glass vials with solid or open top closures.  The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone septa assembled in the cap. The cap material is black…

Plastisol coats exterior of bottle retaining contents if bottle is accidentally broken Non-slip coating allows for greater ease and stability when handling wet or dry Made from amber soda-lime glass that conforms to USP Type III requirements Amber bottles protect light-sensitive samples…

For determination of settleable matter in water and waste water Screw plug cap is virtually leak-resistant and will not snap off in the cone Of clear styrene-acrylonitrile Unit can be easily cleaned through the bottom The new Imhoff cone from Wheaton features a more…

Volume (mL) 2 Tube Material Borosilicate Glass Tube Bottom Shape Flat Tube Color Clear Cap Diameter (mm) 8 Autoclavable Yes Height (in) 1 1/2 Outside Diameter (in) 15/32 Height (mm) 38 Outside Diameter (mm) 12

Screw cap made of radiation grade polypropylene Variety of colors Packaged in case of 100 or 1000

Engineered for arsine analysis using the silver diethyldithiocarbamate (SDDC) colorimetric method Meets ASTM / USP and EPA specifications Arsine absorber (1140L18) has a socket joint Scrubber tube (1140L22) has a standard taper 24/40 Clear-Seal™ joint and a spherical 12/2 ball…

With attached screw cap 30-1000 mL (1 oz-32 oz) sizes Polypropylene caps with choice of liners Amber glass for light sensitive samples Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and…

Open-top closure

Manufactured from borosilicate glass which provides the best chemical resistance Graduations and marking patch assists in measuring volume and identifying content Special pour lip facilitates pouring Packaged in partitioned carton to help prevent scratch marks on bottles

Flint glass, with slight shoulder Tight fitting, lower-density polyethylene cap with thumb tab can be removed and applied easily with the same hand in which the jar is held. Cases are constructed to store jars neatly, with caps attached, in partitioned trays which can be pulled out as drawers.…

Wide mouth bottles Ideal for solids and viscous liquids Bottles are designed for easy cleaning in dishwasher or with a brush Specially designed rim prevents fluids from running down the outside of the bottle Wheaton 400 borosilicate glass Standard Taper stopper size indicated in listings.

936 Macro Outstanding accuracy and precision Adapters for Pasteur pipettes and straw tips Optional nozzle protection filter Two year warranty The 4.8V Acura electro 936 macropipette line includes a microprocessor-controlled motor and rechargeable battery pack. Three models…

Economically priced Made from borosilicate glass Case of 200

Tip made of LDPE (Low Density Polyethylene) Extended controlled dropper tip dispenses one drop at a time Average drop size is 44uL

Available with caps attached or no caps Low profile for greater stability Available with rubber lined caps or Teflon faced rubber lined caps Cap material is black phenolic and cap and liners are autoclavable. This sample vial and closure combination provides an extremely inert and…

With attached screw cap 30-1000 mL (1 oz-32 oz) sizes Polypropylene caps with choice of liners Clear glass for light sensitive sample Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and sample storage…

With attached screw caps Ideal for field or general laboratory use

Wheaton Science Products silicone tubing was specifically formulated for use with media found in pharmaceutical and biotech processing. Silicone tubing is ideal for a range of performance requirements, extended-life pumping and in applications demanding ultimate purity in fluid transfer and…

BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…

Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes HDPE The closure design incorporates a unique double-seal which has been leak-tested under stringent vacuum and pressure conditions and proven to remain tight over extended periods of time. Comparative tests…

Clear plastic hinged case for convenient storage and transportation of sample vials Polycoated partitions protect vials from abrasion and breakage Alphanumeric index card provides for easy vial identification Extra partitions and index cards can be purchased separately

Manufactured from polypropylene 500 or 750 µL conical interior reduces sample size Available with snap/crimp or screw top finish 100 vials per shelf pack/1000 vials per case