KIMAX® brand, Hubbard-Carmick Used in the determination of specific gravity Conforms to ASTM D 70, D 1963, D 1429 and D 115 for a variety of semi-solid materials and emulsions Conical stopper has 1.6 mm hole to allow air to escape

Special medium length Ts 10/18 thermometer with a range of 14 to 38°C in 0.2° Accuracy within ±0.2°C Cap for the side tube is Standard Taper 5/12 and has small vent near the top Each flask body is numbered for easy identification The 50 mL size is used to obtain the specific gravity of…

With white enamel marking spot Glass conforms to ASTM E438, Type 1, Class A Sizes 250 and 500 mL accept 5/16" I.D. flexible tubing, 1000 mL and larger accept 3/8: I.D. tubing. Kimax glass hose connection outlet is fused to the bottle. 250 mL bottle takes size 2 rubber stopper; 500 mL…

Low Form, KIMAX® Brand (Kimble 15165) Of borosilicate glass, with Standard Taper glass stopper. Bottom part of stopper is sealed. Designed from Federal Specification NNN-B-1493. Dimensions indicated in table are i.d. x height without cap.

Ideal for determining the weight of solid samples. KIMAX® bottle with a plug-style, closed bottom stopper that fits into an internally ground body Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Borosilicate, with penny head Conforms to ASTM Standard E 675 Size Standard Taper 13 has solid plug; size Standard Taper 38 has recessed bottom Standard Taper designation indicates the approximate diameter of the ground zone at its widest (gauging) point.

KIMAX®, Le Chatelier type For the determination of the specific gravity of cement, sand and materials of similar fineness For ASTM Standards E 694 and C 188 Marked with “A” to signify adherence to accuracy specifications in U.S. Department of Commerce publication PB-246 623, The…

Stoppers are used with laboratory glassware such as flasks and separatory funnels. Sizes Standard Taper 10/30 through Standard Taper 19/38 are solid Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Ideal for use in tissue culture work and other procedures performed under a fume hood or in other confined areas Calibrated to deliver with blow-out Reverse and negative calibrations Sterile Plugged Disposable serological pipets are packaged in color-coded, paper/plastic…

Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL…

KIMAX glass hose connection outlet is fused to the bottle. Accepts 5/16" I.D. flexible tubing With white enamel marking spot Glass conforms to ASTM E438, Type I, Class A

Clear glass allows for easy viewing of contents Wide mouth design makes it easy to add or remove contents Square shape bottle maximize shelf storage space Type III soda-lime glass Six capacities: 0.5, 1, 2, 4, 8 and 16 ounces Choice of six liner styles

Hollow plug type With sealed bottom and vertical penny head

Disposable, Glass, To Deliver, Plugged, Sterile, Non-Pyrogenic, Canister Pack, Color-Coded Pipets ave a uniform pulled tip and are clean, plugged, sterile and ready for use. Calibrated to deliver to the tip, with two rings near the top denoting that the small amount remaining in the tip after…

KIMAX bottle used in the determination of specific gravity for a large variety of semi-solid materials and emulsions, such as road oils, road tars, soft tar pitches, and asphalt cements (ASTM D70); drying oils, varnishes, resins, and related materials (ASTM D1963); water and brine (ASTM D1429); and…

Bottles come bulk packed in shrink wrapped with caps in bags Clear glass allows for easy viewing of contents Square shape bottle maximize shelf storage space Five capacities: 0.5, 1, 2, 4, and 8 ounces Choice of six liner styles Type III soda-lime glass

Clear glass allows for easy viewing of contents Wide mouth design makes it easy to add or remove contents Square shape bottle maximize shelf storage space Type III soda-lime glass Five capacities: 0.5, 1, 2, 4, and 8 ounces

Non-pyrogenic Pipets have a uniform pulled tip and are clean, plugged, sterile and ready for use Calibrated To Deliver (TD) to the tip Provided with “negative” graduations to increase the versatility of the pipet 72105 series is packaged in color-coded paper/plastic…

KIMAX bottle with a plug-style, closed bottom stopper that fits into an internally ground body. Designed from Federal Specification NNN-B-1493, Type I, Style I requirements Plug-style glass stopper with a closed base fits into the neck of the bottle and seals it to secure contents and…

For use with Kimax brand 03-422 Series weighing bottles. Cap-style stopper only Standard taper joint: 29/12 Size: 33 x 24mm

Stoppers are used with laboratory glassware such as flasks and separatory funnels. Sizes Standard Taper 24/40 and larger are hollow Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Ideal for general micro work and also used as a container for hygroscopic materials where the bottle containing the sample is dropped into the reaction flask. KIMAX® bottle with a cap-style closure that fits over externally ground body The 40 x 80 size accommodates 1 x…

Suitable for autoclaving Plastic screw cap with cemented-in rubber liner is suitable for autoclaving up to 121°C 1756K30 is useful for water sampling and for tissue culture 1756K60 bottle has mark at 99 mL level KIMAX-35 bottles are designed from the requirements for milk dilution bottles…