Corning, Glass, Supplies
-
PYREX Gas Washing Bottles
CorningPYREX® Brand Drechsel Standard Taper stopper incorporates a plain dip tube as the distributor Large hexagonal base for stability Standard Taper stopper size 29/42
-
Hirsch Fritted Disc Funnels
CorningThese fritted disc funnels are very useful in preparative work, or in making separations where it is necessary to wash the precipitate and redissolve with chemicals, which would attack filter paper. The angle of the funnel body facilitates the removal of precipitates. These funnels are available…
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…
-
PYREX Dropping Bottles
CorningRecommended for use in preventing contamination by solubility or pH change With dropping bulb and pipet, Standard Taperground-glass stopper Stopper for 30 mL size is not standard Standard Taper. IMPORTANT: stopper is not covered by Standard Taperspecifications, but ground to…
-
These flat, clear PYREX® dish covers will withstand repeated sterilization (wet or dry). Approximate dish cover diameter and height is 150x20mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space t
-
Spectral transmission varies from 0 at 300 nm to 4% at 500 nm With barrel-shaped, No. 27 Standard Taper stopper Capacity: 250 mL The protective color is an integral part of the flask, which retains the mechanical strength, chemical stability and thermal resistance of PYREX brand labware.
-
PYREX Goetz Centrifuge Tubes
CorningWithout stopper, pear shaped 58 mm o.d. x 159 mm long Lower stem graduations: graduated upward from 0 to 1 mL in .05 mL divisions Bulb graduations: from 1 to 5 mL in 1 mL from 5 to 50 mL in 5 mL from 50 to 100 mL in 10 mL divisions
-
Funnel Only 250 ml For 64Oz
CorningThese replacement 250mL PYREX® Squibb separatory funnels do not have a Teflon® valve assembly or glass stopper. For replacement glass Standard Taper stoppers, see No. 7650; for replacement Teflon® stopcock assemblies, see No. 7681.
-
Distilling Traps
Corning• For determining the amount of dilution in engine crankcase oils when gasoline has been used as the fuel • Graduated from 0 to 5 mL in 1/10 mL divisions • With Standard Taper 24/40 inner joint at bottom • For ASTM Standard D 322; ANSI method Z11.29; API standard 524; and Federal Test Method…
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
On hexagonal base, with barrel-shaped, hollow glass Standard Taper stopper Zero at bottom Calibrated "to contain" Each cylinder features PYREX® stopper and durable, white enamel graduations. Useful as a mixing cylinder.
-
Blown graduates of substantial weight for greater mechanical strength, are ideal for measuring hot solutions because of their heavy walls WARNING: graduates should not be subjected to direct contact with the heat source.
-
Glass Stoppered Bottles
CorningNarrow mouth PYREX® with glass stopper With ground neck With ground glass stoppers 125 mL and 250 mL bottles are furnished with a number 19 Standard Taper stopper; 500 mL bottles are furnished with a number 24 Standard Taper stopper; 1,000 mL and 2,000 mL bottles are…
-
Identical to 9215F20 series, but with marking spot Cap not included Disposable Pyrex® culture tubes have a round bottom and come with a white marking spot. These tubes are designed for both tissue culture and general bacteriological work. These tubes are made from borosilicate glass,…
-
PYREX® Oil Centrifuge Tube
CorningGraduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…
-
PYREX® Griffin Low-Form Beakers
CorningUniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…
-
PYREX® VISTA™ Filtering Flasks
CorningMicro Filtering Flasks These PYREX® VISTA™ micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the…
-
Cap Only 410-18
CorningThese standard 18-410 G.P.I. thread screw caps are replacement caps for the No. 5650 PYREX® volumetric flasks. Caps have a durable cone-shaped polyethylene liner Poly-seal cap insures a leak-resistant closure and no contamination when working with most common reagents
-
Calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 The double scale, numbered up and down, is in durable white enamel. Supplied with shock-absorbing polyethylene bumper guards.
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
PYREX Low Form Culture Flasks
CorningMaximum o.d. 250 mm; height 195 mm Takes number 6 1/2 rubber stopper Capacity 2,500 mL
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
Flask Only 200 ml
CorningThese PYREX® 200mL volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 13 Standard Taper glass stoppers.…
-
Improved design for secure sample preparation and storage Withstand centrifugation up to 3,000 RCF Manufactured from Pyrex® Type I borosilicate glass Available in 3 sizes: 5, 10 and 15 ml Disposable glass centrifuge tubes are convenient and economical. Redesigned with…
-
PYREX Polyethylene Bumper Guard
CorningBumper guard is a polyethylene shock absorbing ring designed to reduce the breakage of cylinders. For best results, slide the ring toward the top to absorb shock should the cylinder be accidentally upset.
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Funnel 30 ml
CorningThese 30mL PYREX® pear-shaped separatory funnels have glass No. 2 Standard Taper stopcocks and strong, hollow No. 9 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.
-
Baffles enhance aeration and agitation of contents of the flask. Unique impeller design ensures optimal stirring. Sidearm designs permit easy access of 25 mL and 50 mL pipets. Reusable Glass Spinner Flask is designed to improve cell growth by keeping the culture media moving and…
-
Funnel 500 ml Cs4
CorningThese 500mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and a strong, lightweight No. 27 Standard Taper glass stopper. The PTFE plug fits into the micro-finish barrel …
-
These 250mL PYREX® three neck flasks have two angled side necks at the same height with 19/22 Standard Taper outer joints and a center neck with a vertical 19/22 Standard Taper joint. This 250mL flask is also a replacement part for organic Material: Borosilicate Glass…
-
Disposable, sterile, PYREX® individually wrapped Calibrated "to deliver" Has negative graduations and fire-polished tips for burr-free, even flow rates Individually wrapped in Steri-View™ wrapping (one side paper, one side plastic) for easier identification and opening
-
Fused, fritted glass disc Polished ends Pore size: coarse, 40-60 µm, medium, 10-15 µm, fine 4-5.5 µm 30 mL disc diameter: 30 mm; fits tube i.d. 36 mm, 50 mL disc diameter: 40 mm; fits tube i.d. 42 mm.