Corning, Equipment
-
Modular PYREX Accelerated One-Step extractor-concentrator performs extraction, concentration, and drying with the same apparatus and is designed for use with solvents of heavier specific gravity than sample being extracted. Extraction and concentration can be done in 1/3 of the time.…
-
Axygen® MultiRack Tip System
CorningFeatures: Reusable rack with reload systems Small footprint and stackable design for maximum bench space usage Extended tips offered in 10, 200, 300, and 1000 μL sizes Color-coded racks for easy volume identification The Axygen MultiRack tip system has been engineered to…
-
Distilling Tube Connector
CorningStandard Taper 10/30 thermometer opening, distilling, three-way, Standard Taper joints Sidearm is at an angle approximately 75° from the lower part of the vertical tube The joint on the sidearm is at an angle approximately 105° from the sidearm The sidearm and lower tube…
-
The Corning Step-R is a repeating pipettor suitable to dispense volatile, dense, viscous, or foaming liquids, and for all applications where long dosing series are required. It works with 8 syringe tip sizes to dispense doses from 1 μL up to 5 mL. The lightweight construction, ergonomically…
-
The Corning variable speed LSE Vortex Mixer provides fast, efficient mixing with minimal vibration. The unit features a powerful, counter-balanced motor drive, continuous or "touch" mix modes. A range of accessories are available for all common sample tubes and containers. Features:…
-
PYREX angled Distilling Adapter
CorningConnecting 105° angle, two-way, Standard Taper joints The arms are appraoximately 105° apart One end is equipped with an outer Standard Taper joint and the other end with an inner Standard Taper joint of the same size Used as a receiver adapter 3941S38 is a…
-
LSE™ Benchtop Shaking Incubators
CorningTruly a benchtop style, the lid on the Corning benchtop shaking incubator has a low pivot point which provides a space-saving size sure to fit on the lab bench and under shelves. Each unit includes a software package, which provides the option of saving data to an external computer or monitoring…
-
This PYREX® general purpose condenser can be used for either distillation or extraction. Although the condensing area per unit length of the 200mm long jacket is low, the large capacity water jacket gives efficient cooling. Condenser tubulations are approximately 10mm O.D. The adapter end is…
-
PYREX Gas Washing Tubes
CorningConsisting of glass tube 8 mm outside diameter with fritted cylinder, 12 mm diameter, fused onto the lower end; overall length, 250 mm Offered in extra coarse (EC) and coarse (C) porosities
-
Tubes for general chromatographic analysis Tops are tooled for rubber stopper fit and tubes are fabricated with sealed-in coarse porosity fritted discs Outflow tubes eliminate the smearing of the definition bands of effluent caused by the tube being filled and solvent mixed before being…
-
The Corning LSE Low Speed Orbital Shaker includes a 30 x 30 cm platform and is ideal for staining and destaining gels, washing blots and general mixing applications. Speed can be set from 3 to 60 rpm and the timer can be set for up to 2 hours or for continuous operation. Ideal for staining…
-
PYREX Stark-Dean
CorningPYREX®10 mL , Stark- Dean For use in the determination of water in petroleum products and bituminous materials Graduated in 1/10 mL divisions from 0 to 1 mL ; in 1/5 mL divisions from 1 to 10 mL With Standard Taper 24/40 joints; meets ASTM Standard E 123
-
Multi Position Stirrers
CorningReliable DC motors Available in 4, 5 and 9 position models Stirs at speeds up to 2,000 rpm Stir up to 9 vessels at the same time with these Multi Position Stirrers. The stirrers' magnets and DC motors provide smooth well-coupled stirring up to 2,000 rpm. The speed of all positions on the units…
-
These PYREX® West condensers are designed with a 190mm long jacket that has a 14/20 Standard Taper top joint. The bottom has 14/20 Standard Taper inner joint with a drip tip. The tubulations are on the same side to reduce breakage. The tubulation O.D. is approximately 10mm. This condenser is a…
-
This Air Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.
-
Single Block, 24 x 1.5 ml tubes
CorningThis is a single block, 24 x 1.5 mL tubes, for use with Corning® LSE™ Digital Dry Bath Heater.
-
Economical Compact design Stirring range: 100-1600 rpm Rugged construction The unit’s 5” x 5” top size saves valuable bench space. Alternating current motor and strong magnet provide longer life and vigorous stirring. Top is constructed of plastic. Stirrer has a one-year…
-
This 250mL capacity PYREX® solvent still head is used for maintaining oxygen free solvents. Head has sufficient storage space to allow solvent removal by syringe or drainage through 2mm T-bore PTFE (Polytetrafluorethylene) stopcock. It has a 24/40 Standard Taper outer joint at top, 24/40 Standard…
-
PYREX Liebig Condensers
CorningWith Standard Taper 24/40 joints Inlet and outlet tubes, 10 mm o.d. are on opposite sides, indentations at lower end of condenser tube support packing when used as fractionating column.
-
These PYREX® extra coarse porosity fritted thimbles are designed for use in PYREX® Soxhlet extractors when it is desirable to weigh the material extracted or where paper thimbles may be attacked by the chemicals used. For PYREX® extractors and extraction apparatus, see Nos. 3740 through 3880. .
-
Slow-Speed Magnetic Stirrers
CorningSmooth, reliable stirring at slow speeds helps promote healthy cell growth Single and multiple-position stirrers Integral or remote-controlled Up to 10 liter capacity Slow-speed stirrers feature glass-filled resin cases for a lightweight and low-profile design. Compact DC…
-
These Corning® stirrers have a durable glass-ceramic 4 x 5 inch Pyroceram® top and offer superior performance and reliability in a low profile, space-saving design. Exclusive closed-loop stirring control monitors and regulates the stirring speed for aqueous, viscous, or semi-solid solutions. A…
-
The Corning LSE Mini Microcentrifuge is a personal bench top instrument that operates at a fixed speed of 6,000 rpm (2,000 x g) and was designed for quick spin downs of micro-samples. Operation is made simpler and more convenient with the design of a quick-release rotor system and electronic brake.…
-
The Axygen Axyspin Plate Spinner is the first centrifuge designed specifically for quick and easy centrifugation of samples in PCR plates or microplates. Capacity for two standard plates Top loading design Exceptionally small footprint Starts and stops in seconds Use before and…
-
LSE High-Speed Microcentrifuge
CorningFast acceleration to a maximum speed 13,300 rpm/16,300 x g Complete with easy access, 24 x 1.5/2.0 mL aluminum rotor Precise, digital control system Set and view rotor speed in rpm or g-force Quiet and cool running, even at maximum
-
PYREX® Distilling Apparatus
CorningA general purpose batch distillation assembly with the facility for addition via the Standard Taper PYREX® stopped neck Ideally suited for the batch production of high purity distilled water The flask bottom is flat with a slide delivery tube, terminating in a Standard Taper joint …
-
LSE™ 49L Shaking Incubators
CorningThis cabinet-style incubator has a compact footprint and can also be stacked to maximize space efficiency. The built in orbital shaker accepts a large assortment of platforms and clamps that can accommodate flasks, Petri dishes, and test tube racks. The maximum capacity is 4 x 1L flasks. …
-
Corning® LSE™ Nutating Mixer
CorningThree-dimensional gentle mixer The Corning LSE Nutating Mixer is a compact mixer that combines the motion of an orbital shaker and a platform rocker to produce a continuous three-dimensional agitation. The output demonstrates a thorough yet gentle mix without foaming. This mixer is safe to use…
-
The Axygen Axyspin refrigerated microcentrifuge is a high-performance refrigerated microcentrifuge designed to quickly process samples for applications such as nucleic acid and protein preparation, purifications, extractions, and pelleting. Powerful refrigeration system cools to 4°C in…
-
LSE™ Digital Vortexers
CorningHeavy duty platform-based vortexer The Corning Digital Vortexer is a multipurpose shaker dedicated to a variety of shaking and mixing applications. Three easily removable and interchangeable platforms accommodate many different sample containers such as flasks, bottles, tube racks, plates,…
-
-
Lambda™ EliteTouch™ Starter Kit
CorningCorning Lambda EliteTouch Starter Kit contains 4 variable volume pipettors in the most popular and universal volumes (0.5-10 µL, 2-20 µL, 20-200 µL, and 100-1000 µL), pipet stand for 4 pipettors, 3 racks with tips, and accessories. Cat. No. 6051 Lambda EliteTouch…