Corning, 2,000 mL
-
PYREX Graduated Cylinder
CorningLifetime Red™ Graduated Cylinders Capacity control is the most important specification for graduated cylinders. Class B tolerances. Corning assures accuracy through precision-drawn tubing and precise calibrations. All cylinders are manufactured to ASTM E 1272 which describes standard…
-
PYREX Boiling Flasks
CorningCarefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…
-
Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…
-
Disposable flasks feature wide, easily accessible mouths Optically clear polycarbonate Baffled and non-baffled bottoms available Sterile and certified non-pyrogenic Fernbach design 4907K36, 4907K49, 4907K30, and 4907K48 are certified RNase- and DNase-free Designed for…
-
Calibrated "to contain" at 20°C Accuracy tolerances approximately twice those specified for Class A
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
These Class A PYREX volumetric flasks are made from red low actinic stained glass to provide protection for materials sensitive to light. The protective color is an integral part of the flask, which retains its mechanical strength, chemical stability and thermal resistance. The graduation line is…
-
Calibrated to Class A ASTM E-542 and E-288 Supplied with a certificate of identification Traceable to NIST standards The graduation line is sharp and permanent. Large white block letters make it easy to read. Supplied with a Standard Taper stopper.
-
Calibrated to contain at 20°C Red stripe, through which calibration mark is etched into transparent glass underneath Supplied with plastic snap cap
-
Featuring PYREXplus® protective PVC safety coating May be autoclaved or microwaved to 121°C (250°F) Resistant to thermal shock Similar to 1744F31 series. Borosilicate glass safety bottles provide good optical clarity and are mechanically durable. Can be marked with either…
-
Transluscent polypropylene beakers printed with blue graduations.
-
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
-
Calibrated "to contain" Tolerances ±5% Inexpensive, designed for those institutions performing many laboratory procedures PYREX® glass has proven itself to be tough and reliable for over 75 years of demanding use in the laboratory environment. The PYREX® name…
-
These Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 PTFE color-coded keyhole stoppers. For replacement stoppers see No. 7630. The graduation line is sharp and permanent. Large white block letters make the…
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
PYREX® single metric scale cylinder is calibrated "to contain". The scale and figures and durable white enamel, which stand out clearly against the red color band on these Lifetime Red cylinders. The 10 mL size features a funnel top. Bumper guards are supplied with 100-, 500- ,…
-
PYREX® Media Storage Bottles
CorningHeavy-duty media bottle can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). New glass…
-
These PYREXPLUS® coated graduated cylinders feature a protective polymer coating for longer product life and safety. They are autoclavable at 121°C and resistant to thermal shock. The cylinder is calibrated "to deliver" (TD). Bumper guards not supplied. For replacement bumper…
-
PYREX Heavy Wall Filter Flasks
CorningWithout tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL
-
Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination
-
Delong style Three baffle indents Designed to provide greater agitation of solution to improve oxygen or gas transfer when used with rotary or reciprocating shakers. Long neck reduces splashing and is designed for two-position polypropylene closures.
-
PYREX® Griffin Low-Form Beakers
CorningUniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…
-
Plug-seal screw caps Graduated Neck opening: 29 mm Ideal for all media prep and storage needs. Easy to use with larger volume serological pipets.
-
Transluscent polypropylene beakers printed with blue graduations.
-
Calibrated "to contain" Red stripe, through which capacity mark is etched for legibility and permanence Barrel-shaped Standard Taper glass stoppers
-
Class A PYREX graduated cylinders are calibrated “To Deliver” (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement bumper…
-
Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock…
-
Heavy-duty rim for longer service Narrow mouth Graduated scale indicates approximate volume The Erlenmeyer design is extremely popular and has been modified for numerous lab applications.
-
Transluscent polypropylene graduated cylinders are manufactured with raised graduations at the primary scale points. Cylinders have a hexagonal base and are calibrated "to contain" (TC). Tolerances according to ISO 6706. Exposure to temperatures above 60°C may affect accuracy.
-
These PYREX® wide mouth Erlenmeyer flasks are especially recommended for use as titration flasks and are designed with heavy duty rims to reduce chipping. For convenience, these flasks are graduated in durable white enamel to show the approximate capacity and have an extra large marking…
-
These PYREX® Class A graduated cylinders are calibrated "to Deliver" (TD) in accordance with ASTM E-1272 and ASTM E-542. The double scale, numbered both up and down, is in durable blue enamel. Cylinders are supplied with shock absorbing polyethylene bumper guards. For replacement…
-
Similar to 4997B13 series, but with protective PVC coating Coating promotes longer product life and greater safety and helps contain glass and contents should breakage occur Autoclavable and microwaveable to 121°C (250°F) Resistant to thermal shock With PYREX Standard Taper stopper