Agilent Technologies, ICP-MS Supplies
-
Tube Fitting
Agilent TechnologiesDrain tubing, PTFE, 1/16 inch od, 0.038 inch id, for PerkinElmer NexION Tubing is made from PTFE and is sold by the foot. Note that ICP-MS instruments require a six foot length of drain tubing. Agilent Technologies products are intended for sale/shipment within the US only.…
-
Plug for Cross Joint, 3pcs.
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Gas Tubing
Agilent TechnologiesThe Agilent Technologies gas tubing helps to connect nebulizer, make-up and HMI/UHMI aerosol dilution argon gas from instrument to sample introduction components. One tubing each is required for external carrier of makeup and dilution gas. It is suitable for use with 7700, 7800, 7850, 7900, 8800,…
-
Skimmer Cone
Agilent TechnologiesAgilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…
-
Plug for Carrier Gas Connector,3/Pk,ISIS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Integrated Autosampler (I-AS) Manl (JP)
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Configurable Supplies Kit
Agilent TechnologiesThe Agilent Technologies configurable supplies kit is suitable for use with Agilent 8900 QQQ ICP-MS. Required options can be selected to add interface cones and specific parts associated with extraction lens and ORS type. Application: For Agilent 8900 QQQ ICP-MS, Select Required Options to Add…
-
Skimmer Cone
Agilent TechnologiesAgilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…
-
Vacuum Fluid Oil Mist Filter
Agilent TechnologiesOil mist filter for DS402 rotary vane pump. Replacement oil mist filter only, does not include tubing or clamp. Replace oil mist filter every 12mths along with rotary pump oil. Application: For DS402 Rotary Vane Pump. Replacement Oil Mist Filter Only, Replace Oil Mist Filter Every 12Mths Along…
-
Hardware Maintenance Manual
Agilent TechnologiesA complete range of tools and maintenance manuals for Agilent ICP-MS systems can be found here. These include our comprehensive maintenance videos/DVD to ensure you have the right knowledge to keep your instrument performing at it's best. Application: For Agilent 7700 Series ICP-MS This product…
-
Tygon tubing (3m), for ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Transfer line for GC-ICP-MS Interface
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
GC Interface Manual
Agilent TechnologiesThe Agilent Technologies GC interface manual provides with the necessary information required to use the specific interface. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
G1131A option - Add Ni sampling cone for x-lens, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Reducing Union connector,8mm x 4mm, ISIS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Interface wrench, skimmer cone removal
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Alignment Boss GC-ICP-MS
Agilent TechnologiesThe Agilent Technologies alignment boss offers 7900 instrument capability and is suitable for use with GC-ICP-MS interface. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Ion Extraction Lens 2
Agilent TechnologiesIon extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Ion Extraction Lens 1
Agilent TechnologiesIon extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Peristaltic Pump Tubing
Agilent TechnologiesObsolete. Replaced by 5005-0023. Replaced by Easy-fit tubing with 2-stopper optimum length to avoid trimming and expedite sample and ISTD uptake. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
ISIS 3-way valve assembly kit,1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
G1131A option - Mandatory option for a 79 with s-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Offset Skimmer Base Assembly
Agilent TechnologiesAgilent ICP-MS skimmer cone bases are available in either stainless steel or brass. The operating temperature of the skimmer cone tip is controlled by the skimmer base material. The stainless steel base is used for nickel (Ni) skimmer cones. The platinum skimmer cone should only be used with the…