A complete range of tools and maintenance manuals for Agilent ICP-MS systems can be found here. These include our comprehensive maintenance videos/DVD to ensure you have the right knowledge to keep your instrument performing at it's best. Application: For Agilent 7900 ICP-MS This product is only…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

PerkinElmer ICP-MS Coolant fluid, for ELAN 9000/6xX00/DRC/NexION, 1 L. Application: For Elan 9000/6Xx00/DRC/NexION, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Ion extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…

Replacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For S-Lens of Agilent 7900 ICP-MS This product is only available to U.S. Domestic Customers. For research…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies comprehensive spares kit is suitable for use with 7700 and 8800 semiconductor ICP-MS fitted with s-lens and Edwards E2M18 vacuum pump. It consists of peristaltic pump tubes for sample (Tygon, 3-stop, white/white, 2 x 12/pk), peristaltic pump tubes for waste (Ismaprene,…

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

Many types of autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 and ASX 500 series used with earlier model instruments. Standard carbon fiber sample…

10X magnification with LED illumination and measuring scale. Ideal for inspection and measurement of the ICP-MS sampler and skimmer cone orifice. Ten times magnification with LED illumination, manual focus and +/- 15 mm scaled reticle with 0.1 mm divisions. Includes protective case. Requires four…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies electron multiplier detector is suitable for use with Agilent 7800, 7850 and 7900 ICP-MS models. Application: For Agilent 7800, 7850 & 7900 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

The Agilent Technologies 0.44 mm peristaltic pump tubing consists of a two-stop design and the PVC construction provides more flexibility and endurance. Application: For PerkinElmer Elan & NexION, Flared End PVC Tygon®, 1 Pack of 6 Pcs. Suitable for use with PerkinElmer Elan & NexION ICP-MS This…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

A number of different autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments. This product is only…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

ICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

ICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…