Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

The Agilent Technologies basic consumables kit consists of 12 easy-fit peristaltic pump tubes for sample (2-stop, white/white, 5005-0020), 12 waste (3-stop, yellow/blue, 5005-0022), 12 internal standard (2-stop, blue/orange, 5005-0021). It also includes PFA sample tubing measuring 0.5 mm I.D x 1.6…

HPLC separation, followed by ICP-MS detection is well established as the analytical method of choice for speciation analysis of many sample types. As a leader in GC and HPLC systems, columns, and ICP-MS instrumentation, Agilent is at the forefront of hyphenated ICP-MS research and development. For…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies MicroFlow nebulizer with inert PFA and Agilent integrated SPS4 probe self-aspirates at 200 µL/min. It is suitable for use with Agilent SPS 4 auto sampler, for trace analysis and hydrofluoric acid (HF) analysis. Application: For use with Agilent Sps 4 Autosampler, For Trace…

Replacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For M-Lens of 8900 Semiconductor ICP-MS This product is only available to U.S. Domestic Customers. For…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

The Agilent Technologies two-stage ammonia/helium reaction gas regulator has high purity stainless-steel body and diaphragms which provide excellent strength and durability. It has CGA705 inlet with maximum pressure of 3000 psig and outlet pressure of 15 psig with 30 psig gauge and 1/4 Inch FPT…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Oil mist filter kit for DS402 rotary vane pump. Includes oil mist filter element, connecting tubing, securing clamp. Application: For DS402 Rotary Vane Pump, ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies RF load coil assembly is self-aligning in nature and helps in the installation of various capillary instrument. Application: For NexION/ELAN 9000/6x00/DRCs, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to…

10X magnification with LED illumination and measuring scale. Ideal for inspection and measurement of the ICP-MS sampler and skimmer cone orifice. Ten times magnification with LED illumination, manual focus and +/- 15 mm scaled reticle with 0.1 mm divisions. Includes protective case. Requires four…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies gas fitting works with MircoMist nebulizer and can be used as a standard on 8900 ICP-QQQ. It comes with PEEK ratchet connector. Application: For Mircomist with Peek Ratchet Connector. Standard On 8900 ICP-QQQ This product is only available to U.S. Domestic Customers. …

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent ICP-MS skimmer cone bases are available in either stainless steel or brass. The operating temperature of the skimmer cone tip is controlled by the skimmer base material. The stainless steel base is used for nickel (Ni) skimmer cones. The platinum skimmer cone should only be used with the…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Tubing and filter for Argon supply to instrument, for Agilent ICP-MS with s-lens for semiconductor analysis. Includes PTFE tubing (5 m) with fittings and connector (p/n 5063-9132), high purity Argon Gas filter (p/n 5064-8092). Suitable for 7700. Application: For Argon Supply to Instrument, for…

The Agilent Technologies front and back ferrule is suitable for use with 3.0 mm O.D tubing. It is compatible with ISIS-DS used with Agilent 7500 ICP-MS. Application: For ISIS-DS used with Agilent 7500 ICP-MS This product is only available to U.S. Domestic Customers. For research use only,…

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.