Agilent Technologies, ICP-MS Supplies
-
Integrated Sample Introduction System 3 Flangeless Fitting
Agilent TechnologiesThe ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…
-
Integrated Autosampler (I-AS) Sample Tray C Rack
Agilent TechnologiesAgilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…
-
Tubing-flexible 0.97-in-Cuff-ID 1.02-in-
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Omega lens for s-lens, ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Ion Lens
Agilent TechnologiesThe Agilent Technologies ion lens are suitable for ELAN 9000/6x00/DRCs and PerkinElmer instruments. Application: For ELAN 9000/6x00/DRCs, PerkinElmer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Tube Fitting
Agilent TechnologiesDrain tubing, PTFE, 1/16 inch od, 0.038 inch id, for PerkinElmer NexION Tubing is made from PTFE and is sold by the foot. Note that ICP-MS instruments require a six foot length of drain tubing. Agilent Technologies products are intended for sale/shipment within the US only.…
-
Injector assembly, GC-ICP-MS interface
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Omega lens for x-lens, 7900 ICP-MS, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Arsenic Speciation Column
Agilent TechnologiesHPLC separation, followed by ICP-MS detection is well established as the analytical method of choice for speciation analysis of many sample types. As a leader in GC and HPLC systems, columns, and ICP-MS instrumentation, Agilent is at the forefront of hyphenated ICP-MS research and development. For…
-
Extraction-Omega Lens Assembly
Agilent TechnologiesReplacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For S-Lens of 7700 & 8800 Semiconductor ICP-MS This product is only available to U.S. Domestic Customers. …
-
MassHunter Workstation User Guide
Agilent TechnologiesMassHunter Workstation user guide for Agilent 7700 Series ICP-MS. Application: For Agilent 7700 Series ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
PTFE sample tubing 2.0mm id, 3.0mm od 5m
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
MicroFlow Nebulizer
Agilent TechnologiesThe Agilent Technologies MicroFlow nebulizer with inert PFA and Agilent integrated SPS4 probe self-aspirates at 200 µL/min. It is suitable for use with Agilent SPS 4 auto sampler, for trace analysis and hydrofluoric acid (HF) analysis. Application: For use with Agilent Sps 4 Autosampler, For Trace…
-
Coolant Vacuum Pump Fluid
Agilent TechnologiesThe Agilent Technologies vacuum pump fluid acts as a coolant in a Leybold roughing pump and helps in the smooth lubrication of the pump. Application: For Leybold Roughing Pump, For Elan 9000/6Xx00/DRC. Suitable for PerkinElmer Elan ICP-MS This product is only available to U.S. Domestic…
-
Integrated Autosampler Vial
Agilent TechnologiesThe Agilent Technologies 1.5 mL integrated auto sampler vial is made of perfluoroalkoxy (PFA) which is capable of withstanding chemical, thermal, and mechanical stress. It measures 11.8 mm O.D at base, 14.2 mm O.D at top and is 23 mm tall. It has a conical base and is suitable for use with Agilent…
-
Skimmer Cone
Agilent TechnologiesICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…
-
Plastic Tray ISIS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Hyper Skimmer Cone Screw
Agilent TechnologiesAgilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…
-
Skimmer Cone
Agilent TechnologiesICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…
-
Helium Gas Regulator
Agilent TechnologiesThe Agilent Technologies two-stage helium gas regulator with PTFE seals and stainless-steel diaphragms has a brass body which provide excellent strength and durability. It has CGA580 inlet with maximum pressure of 3000 psig and outlet pressure of 15 psig with 30 psig gauge and 1/8 Inch Swagelok…
-
Chiller Coolant Mix
Agilent TechnologiesPerkinElmer ICP-MS Coolant fluid, for ELAN 9000/6xX00/DRC/NexION, 1 L. Application: For Elan 9000/6Xx00/DRC/NexION, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Extraction-Omega Lens Assembly
Agilent TechnologiesReplacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For M-Lens of Agilent 7900 ICP-MS This product is only available to U.S. Domestic Customers. For research…
-
M5141A option - Add Ni sampling cone, 7800 with x-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
G1131A option - Mandatory option for a 79 with x-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Ion Extraction Lens 2
Agilent TechnologiesIon extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…
-
Skimmer Cone
Agilent TechnologiesAgilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…
-
Integrated Autosampler (I-AS) Sample Tray B Rack
Agilent TechnologiesAgilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…
-
Interface Cones
Agilent TechnologiesCompatible Part Std: Fitted as standard when instrument shipped from factory 18mm Pt cone insert is recommended for measuring H2SO4 above 2% Pt T-mode cones are not available T-mode is not used with ORS models Agilent Technologies products are intended for sale/shipment…
-
Alignment Boss GC-ICP-MS
Agilent TechnologiesThe Agilent Technologies alignment boss offers 7900 instrument capability and is suitable for use with GC-ICP-MS interface. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Rinse Station for ASX-500 Series, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Integrated Autosampler (I-AS) Sample Tray F Rack
Agilent TechnologiesAgilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…
-
G1131A option - Add Pt sampling cone for s-lens, 1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.