The Agilent Technologies discrete sampling valve nut is used for integrated sample introduction system (ISIS) with Agilent 7700 and 8800 ICP-MS. Application: For ISIS used with Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

The Agilent Technologies ferrule and O-ring kit containing 2 FPM O-rings and 2 ferrules, provides replacement sealing parts for PP connector G1820-65052. It is suitable for use with nebulizer gas line connector for babington & quartz concentric nebulizer. Application: For Nebulizer Gas Line…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

ICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements. This product is only available to U.S. Domestic Customers. …

The Agilent Technologies integrated auto sampler tubing is made of tygon which makes it compatible with aqueous solutions and HF acids. It helps to connect from peristaltic pump to rinse bottle or drain bottle and is suitable for use with Agilent integrated auto sampler (I-AS) 7700, 7800, 7850,…

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…

ICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

Arsenic speciation analysis handbook, Japanese, for ICP-MS. Application: For ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies octopole reaction system cell exit lens is suitable for use with Agilent 7700 and 8800 ICP-MS models. Application: For Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies 0.44 mm peristaltic pump tubing consists of a two-stop design and the PVC construction provides more flexibility and endurance. Application: For PerkinElmer Elan & NexION, Flared End PVC Tygon®, 1 Pack of 6 Pcs. Suitable for use with PerkinElmer Elan & NexION ICP-MS This…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

The Agilent Technologies electron multiplier detector is suitable for use with Agilent 7800, 7850 and 7900 ICP-MS models. Application: For Agilent 7800, 7850 & 7900 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

The Agilent Technologies comprehensive spares kit is suitable for use with Agilent ICP-MS systems fitted with x-lens. It does not include interface cones, so add G3690A# option for 7700x/e and 8000 series ICP-MS. Application: For Agilent ICP-MS Systems Fitted with X-Lens. Excludes Interface Cones,…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Tubing and filter for Argon supply to instrument, for Agilent ICP-MS with x-lens. Includes Nylon tubing (5 m) with fittings and connector (p/n 5063-9132), fiber membrane gas filter (p/n G1820-80341). Suitable for 7700, 7800, 7850, 7900, 8800 with x-lens. Not for s-lens / semiconductor…

The Agilent Technologies alignment boss offers 7900 instrument capability and is suitable for use with GC-ICP-MS interface. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Ion extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.