Ideal for temporary waste containment Easy-snap safety latch on lid Lid/vent system reduces volatile emissions Wide mouth funnels for easy pouring Safer than glass HDPE and PTFE material construction resists most common lab solvents, acids and bases. Removable neck screen…

Fits faucet with 3/ 8 inch internal pipe thread Usable for pump-off of corrosive vapors which attack metal Operates efficiently with water pressures as low as 7.5 psi for minimum water consumption Maximum free air pumping capacity of 11.5 liters per minute at a water flow rate of 6.5 liters per minute

Reduce the risk of carry-over contamination and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers. Excellent for freezing…

Ensure safe and efficient liquid dispensing from tanks by using Thermo Scientific™ Nalgene™ spigots for storage tanks. Spigots are for use with Naglene™ tanks up to 100 gal. with factory installed threaded boss.

Guaranteed unbreakable Greater resistance to thermal shock than porcelain Fire polished, corrosion-resistant, inert, non-stick glass surfaces bonded to metal Marked with numbered quadrants for easy location of crucibles and other containers, allows use by several people Diameter 9 inches;…

Create high-density storage with the Thermo Scientific™ Nalgene™ all-purpose stackable drawer. These drawers nest, and can be mounted under a shelf or cabinet with provided screws.

Acrylic Plastic Made of transparent acrylic plastic to give maximum protection against beta radiation during procedures such as nucleic acid sequencing, recombinant DNA studies, etc., using beta emitting isotopes Beta radiation from a 100 mCi point source of P 32 shows no penetration through a…

All-plastic clamp will not rust, corrode or deform Molded in one piece to eliminate sharp edges Autoclavable Allows precise, one hand regulation of fluid flow, from completely open, to restricted flow, to completely closed. Ideal for use with Nalgene laboratory tubing.

Wear the adjustable Thermo Scientific™ Nalgene™ Polycarbonate Faceshield over safety glasses. With an optically clear window made of 1/16" (1.5mm) thick polycarbonate, this faceshield provides impact protection as well as protection from UV light in the 200-360nm range. It is…

Ensure safe and efficient liquid dispensing from tanks by using Thermo Scientific™ Nalgene™ spigots for storage tanks. Spigots are for use with Naglene™ tanks up to 100 gal. with factory installed threaded boss.

View contents easily with Thermo Scientific™ Autoclavable Polypropylene Desiccators, featuring a robust body and high resistance to all solid desiccants. These desiccators have a transparent polycarbonate cover. The small size (3756C20) comes with a 140mm aluminium plate. The plate for the…

Double your cryobank storage capacity and cut storage costs by 50%. The Thermo Scientific™ dense storage options use standard CryoBoxes™ with 13 x 13 tube separators and fit 169 1mL tubes in a single CryoBox™. These standard-sized boxes are compatible with existing standard-sized lab freezer racks.

Polypropylene screw closure Teflon TFE stir bar Polyvinylidene fluoride, stainless steel reinforced shaft TFE impeller Ideal for low-speed mixing of large volumes of media and buffer solutions on a magnetic stir plate For use with Nalgene 10 and 20-liter carboys with 83B (83-mm)…

Designed for use in a wide range of applications, Thermo Scientific™ Nalgene™ filtration hardware and accessories can be used in conjunction with our various lines of filtration devices.

High-density Polyethylene bottles RCF to 8,000 x g Withstand temperatures to -100°C Flat bottoms HDPE bottles are for use with refrigerated centrifuges. Bottles include 43 mm polypropylene screw caps. Dimensions (o.d. x H, mm): 61 x 128.

Conveniently charge and store one or three E1-ClipTip pipettes with the Thermo Scientific™ E1-ClipTip™ Charging Stands.

Reduce the risk of carry-over contamination and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ Bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers.…

Store any components requiring controlled storage conditions, such as anhydrous and hygroscopic biological and chemical compounds and electronic assemblies. Thermo Scientific™ Nalgene™ Acrylic Desiccator Cabinets are clear and feature gaskets to provide a tight seal. Neoprene…

Clearly view contents with the transparent PC cover of the Thermo Scientific™ Nalgene™ Polypropylene Desiccator with Stopcock. Lighter in weight than glass, the robust polypropylene body is compatible with all solid desiccants and protects against breakage. This desiccator is for room…

Polycarbonate For use with Nalgene 3145 series

Polycarbonate bottles RCF to 27,500 x g Withstand temperatures of -135° to +135°C Round bottoms Autoclavable (autoclaving shortens bottle life). Include 38 mm polypropylene caps. Dimensions (o.d. x H, mm): 61.7 x 136.

Teflon® FEP Bottles RCF to 4,000 x g Withstand temperatures from -100° to +150°C Flat bottoms Autoclavable bottles have an 80% capacity (approx. 200 mL) in refrigerated centrifuges. Bottles include 38 mm Tefzel® ETFE screw caps. Dimensions (o.d. x H, mm): 62 x 122.

Works best between 10 to 28 in. Hg Prevents back pressure with aspirator-type vacuum pumps Made of high-density polyethylene with gum rubber flap Serrated connectors on inlet and outlet take 1/4- to 5/16-inch-bore tubing Useful for vacuum systems Not for use with liquids

Concave PC, White

Closure with Silicone Grommet for Nalgene # 2227-0020

Store reagents with the Thermo Scientific™ Nalgene™ Jerrican with Tethered Polypropylene Closure, featuring a space-saving design, molded-in handle and recessed grip at the bottom to provide better control when pouring. The double-ported 2243-9013 is ideal as a reservoir in automated systems. The…

Thermo Scientific™ Nalgene Fernbach Culture Flask is constructed of durable, transparent polycarbonate, and provides a wide surface area desirable for culturing in liquid media, increasing aeration for better growth. Break-resistant, transparent polycarbonate; safer than glass…

Impellers made of stainless steel (8592H39 through H48) or glass-filled propylene (8592H36) Autoclavable 8592H36 Lower Assembly/Shaft and Impeller; shaft length x diameter: 13-1/2" x 3/8"; impeller diameter: 4". 8592H39 Lower Assembly is for use with the Nalgene 30-gallon,…

Thermo Scientific™ Nalgene Probe Adapter Closures allow for insertion of 7- to 14mm diameter probes into Thermo Scientific Nalgene Culture Vessels and Bottles with 38-430 neck finishes. Provides a seal between the external environment and the interior of the culture vessels to prevent…

Angled pipet holder prevents pipets from sliding out. Accommodates bags, boxes, pipet canisters or 1 - 100 mL individually-wrapped serological pipets.

Reduce the risk of carry-over contamination and eliminate the cost of cleaning, sterilizing and associated validations. Use sterile, ready-to-use Thermo Scientific™ Nalgene™ Biotainer™ bottles and Carboys, designed specifically for pharmaceutical and biological manufacturers. Excellent for freezing applications.

Ensure leakproof† service of Thermo Scientific™ Nalgene™ centrifuge bottles at their recommended maximum rated speeds by using Nalgene sealing caps for oak ridge centrifuge tubes. They are also recommended for use when spinning hazardous materials.