The Thermo Scientific Precision® flask clip accommodates 50 mL flasks and is suitable for use with reciprocal, Dubnoff and shallow-form shaking water bath models.

The Thermo Scientific komet 30 stir bar is suitable for use with stirrer controller. Generate over three times the torque of conventional stirring bars with Thermo Scientific™ Komet Stir Bars, significantly enhancing stirrer performance and applications versatility Komet 30

The Thermo Scientific small gassing hood is suitable for use with Precision® 15 Liters shaking water bath models.

Heratherm Advanced Protocol Ovens provide a choice of gravity or mechanical convection. Gravity convection units are designed to protect delicate samples while offering temperature uniformity of ±2.9°C or better, and temperature stability of at least ±0.3°C at 150°C.…

The Thermo Scientific atmosphere controlled ashing furnace with (B1) digital single set point temperature controller is mainly used to burn samples in the air until only ash remains. It is ideal for use in research facilities and chemical laboratories to conduct elemental analysis.

Complement your water baths with a gassing hood, gable cover, designed to fit large flasks, or concentric ring cover for steaming.

Triple your usable working area with two supplied accessory refractory shelves using Thermo Scientific™ Thermolyne™ largest tabletop muffle furnace. Designed for safe operation, these furnaces are available in three temperature control models. They are ideal for annealing glass, determinations of…

Dry up to six times faster than when using conventional units. Thermo Scientific™ Vacutherm Vacuum Heating and Drying Ovens provide outstanding capabilities for fast and gentle drying. Excellent heat transfer and fast heating up minimize operation time. A double-paned safety-glass front…

Purify water volumes up to 75L/hr using cost-efficient Thermo Scientific™ Barnstead™ Hose Nipple Cartridges. Ideal for softening, deionization, and organic and chlorine removal applications, these cartridges are for use with the simple cartridge holder that easily mounts to the wall. Designed for…

Pre-treat your feed water with Thermo Scientific™ Barnstead™ 1/2 Size B-Pure™ Filters. In addition to pre-treating feed water, the filters can act as a final filter to ensure consistently pure water. Compatible with B-Pure 1/2 size filter holders, these filters are available in varying pore sizes…

The Thermo Scientific Lindberg/Blue M™ silicone door gasket is suitable for use with VO1824 series vacuum oven models.

The Thermo Scientific 15 Inch concentric ring set is suitable for use with concentric ring steaming water bath models. Nest smoothly and become progressively larger as rings are removed

The Thermo Scientific™ small bottle cap and seal measures 300 mm x 35 mm. It is suitable for use with 110113, 110115 and 110116 series hybridization tube models. It is made of sturdy material which offers enhanced durability.

The Thermo Scientific flask holder accommodates 35, 25 mL flasks and is suitable for use with 118077 circulating bath tray model. Accommodate a range of flasks with Thermo Scientific™ Stainless-Steel Flask Holders for Lindberg/Blue M Shaking Circulating Baths

Thermo Scientific* Finnpipette Novus GLP Kits provide ergonomic and easy-to-use Finnpipette Novus pipetters in an all-inclusive kit containing everything you need for pipetting. Finnpipette Novus delivers performance with greater ease-of-use and reduced risk of injury. Unique to Novus, the…

Use Thermo Scientific™ atmosphere controlled ashing furnaces shelves with Thermo Scientific™ Thermolyne™ atmosphere controlled ashing furnaces.

Triple your usable working area with two supplied accessory refractory shelves using Thermo Scientific™ Thermolyne™ largest tabletop muffle furnace. Designed for safe operation, these furnaces are available in three temperature control models. They are ideal for annealing glass, determinations of…

Triple your usable working area with two supplied accessory refractory shelves using Thermo Scientific™ Thermolyne™ largest tabletop muffle furnace. Designed for safe operation, these furnaces are available in three temperature control models. They are ideal for annealing glass, determinations of…

The Thermo Scientific Lindberg/Blue M™ Buna-N door gasket is suitable for use with VO1824 series vacuum oven models.

The Thermo Scientific TFM membrane finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal.

Thermo Scientific™ Finnpipette™ F1 GLP Kits offer a variety of single channels in a range of volumes that are packaged with compatible Finntips, and a convenient pipette stand to support good laboratory pipetting in your lab. Select the kit that is right for you, and take advantage of…

The Thermo Scientific accessory is compatible with Heratherm general protocol oven, which is mainly used to dry and heat during research, clinical or industrial needs.

The Thermo Scientific ELED hybridization oven mesh roll measuring 25 cm x 500 cm, ensures leak proof hybridization process with optimal results.

The Thermo Scientific high capacity stirrer is suitable for use with Thermo Scientific™ Cimarec™ power direct. It is mainly used in research facilities and chemical laboratories. It features sturdy construction which ensures durability.

Mechanical convection models provide temperature uniformity of ±4.0°C or better, and temperature stability of at least ±0.4°C at 150°C. Perform faster drying or heating with the Thermo Scientific™ Heratherm™ General Protocol mechanical convection ovens,…

The Thermo Scientific large volume stirrer finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the durable and efficient construction makes it a must to have at your disposal.

Pre-treat your feed water with Thermo Scientific™ Barnstead™ 1/2 Size B-Pure™ Filters. In addition to pre-treating feed water, the filters can act as a final filter to ensure consistently pure water. Compatible with B-Pure 1/2 size filter holders, these filters are available in varying pore sizes…

Choose one of our specially-priced Nanopure™ water purification consumables packages-at a substantial savings over the individual listed prices.

The Thermo Scientific™ Sample Racks are for use with Thermo Scientific™ SWB1122 and RSWB3222 Lindberg/Blue M Circulating Water Baths.

Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as…

The Thermo Scientific hybridization tube rack finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal.

The Thermo Scientific ashing furnace finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal.