Steam Bath

Compare Tool

Select up to 3 products

Steam Bath
1 - 32 of 34
Sort
View
Show
  • Water Bath, Stainless Steel, 203 mm

    Boekel

    …rounded at edges, beaded reinforcing rim, steam vent, riveted handles and set of seven concentric rings including central cover with handle The outside ring has the edge turned down to fit over rim of bath. Diameter of smallest opening is 25 mm. Outside diameter of bath is 203 mm. Depth: 67 mm.

  • Stainless Steel Water Bath

    United Scientific Supplies

    This standard size (8" x 2.75") water bath is ideal for heating flasks, bottles, tubes, etc. Features seven concentric rings, flat bottom, and a steam escape outlet. Stainless steel construction.

  • Gum Evaporation Baths

    Koehler

    …The bath is protected by an overtemperature control circuit. Model K33800 (7151L10) is a six-unit bath with a built-in, thermostatically controlled superheater which delivers dried steam to the bath inlet for steam-jet method testing of aircraft turbine fuels. Digital-indicating solid state bath

  • Stainless Steel Support Jacks

    BrandTech®

    … Ideal for use in fume hoods, solution-baths, marine and industrial laboratories Support miniflasks, jars, columns, large baths, magnetic stirrers, heaters and more Resistant to sanitizing agents and steam sterilization for biological applications Variety of sizes and capacities

  • Existent Gum Steam Generator

    Koehler

    …low water cut-off; steam safety valve; high-limit pressure cut-out with manual reset; steam pressure gauge. Features and Benefits For steam-jet method testing of aircraft turbine fuels Meets output requirements of three-unit and six-unit evaporation baths Electrically heated…

  • Scienceware® Floating Centrifuge Tube Racks

    Bel-Art Products

    …tubes with maximum contact with the water and better circulation of the water bath around the tubes, allowing superior temperature control of samples. Work on the benchtop, float in the water bath Tubes are held tightly in rack to assure no “pop-up” tubes or…

  • Stainless Steel Island Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • Canopy Hoods

    Labconco

    Designed to vent non-toxic materials such as heat, steam and odors from large or bulky apparatus such as ovens, steam baths and autoclaves, wall-mounted or suspended from the ceiling, built-in baffle to increase air velocities and enhance its overall capture efficiency, glacier white epoxy-coated…

  • Poxygrid® 96-Place Test Tube Racks

    Bel-Art Products

    …and other tools configured for drug discovery and robotic applications. Flow-through design allows rapid temperature changes of samples when transferring between ice bath and heated water bath Rigid wire construction with blue epoxy finish Steam autoclavable at 121°C (250°F)

  • Evap Concentrator 500ml

    DWK Life Sciences (Kimble)

    …charged assembly should be placed over a vigorously boiling water bath. The water level should be maintained just below the lower joint and the apparatus mounted so that the lower rounded surface of the flask is bathed in steam. The final sample remains in the lower tube for further analysis. Lower…

  • Scienceware® Stack Rack® Test Tube Racks

    Bel-Art Products

    …secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). Polypropylene racks have white surfaces that make color comparisons easy; sturdy and chemical resistant;…

  • Fiberglass Island Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of composite resin, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat resistance.…

  • Serum Vial Racks

    Bel-Art Products

    …shelf height is 41mm (1 5/8"). Chemical resistant and steam autoclavable at 121º C (250º F). Sized for serum vials (10-13mm diameter), RIA vials and T3/T4 reaction vials (13-16 & 16-20mm diameter). Polypropylene racks fit most water baths for elevated temperature incubations End plates have…

  • Scienceware® PrepSafe™ Microcentrifuge Tube Mini Floating Racks

    Bel-Art Products

    …agitating samples Stable feet keep racks upright on the bench Use in water baths, ice or on the benchtop 95mm outer diameter fits most 1000ml beakers Optional vortexing attachment allows samples to be vortexed simultaneously Steam autoclavable at 121°C (250°F)  

  • Scienceware® PrepSafe™ Microcentrifuge Tube Mini Floating Racks with Vortexing…

    Bel-Art Products

    …handle for easy lifting without agitating samples Stable feet keep racks upright on the bench Use in water baths, ice or on the benchtop 95mm outer diameter fits most 1000ml beakers Also available without vortexing attachment and in 3 other colors Steam autoclavable at 121°C (250°F)  

  • Sidewall Tough-Tags®

    Diversified Biotech

    …polyester Will not dry up or fall off Easy to write on Smear-resistant Sidewall Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°C, organic solvents, caustic agents and other challenges without peeling. Tags have strong…

  • Tough-Tags, Teeny, Pk. 1,500

    Diversified Biotech

    … Will not dry up or fall off Easy to write on Smear resistant Teeny Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°C, organic solvents, caustic agents and other challenges without peeling. Tags have strong adhesion…

  • Laser Tough-Tags

    Diversified Biotech

    …inert polyester Will not dry up or fall off Easy to write on and smear-resistant Laser Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°C, organic solvents, caustic agents and other challenges without peeling. Tags have strong adhesion…

  • Microcentrifuge Tube Tough-Tags® on Rolls

    Diversified Biotech

    …not dry up or fall off Easy to write on Smear resistant Microcentrifuge Tube Tough-Tags withstand steam-autoclaving, boiling water baths, humid incubators, freezing temperatures to -20°C, organic solvents, caustic agents and other challenges without peeling. Tags have strong…

  • Scienceware® Adjustable-Height Test Tube Rack

    Bel-Art Products

    …this rack’s adjustable height prevents submersion and sinking problems that might occur with heavier or unbalanced tubes. Its compact yet stable footprint saves bench and bath space. Rack travels in and out of bath without splashing. All parts are steam autoclavable at 121°C (250°F).

  • Stainless Steel Wall Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of type 304 Stainless Steel, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat…

  • Evap Concentrator 250ml

    DWK Life Sciences (Kimble)

    …set up in a hood. Charged assembly should be placed over a vigorously boiling water bath. Water level should be maintained just below the lower joint and apparatus mounted so that the lower rounded surface of the flask is bathed in steam. Final sample remains in the lower tube for further analysis.

  • Multi-Purpose Tray with Snap-on Lid

    Bel-Art Products

    …with identical trays and lids to maximize cupboard and shelf storage capacity Shallow depth is useful for holding small vials or bottles in a water bath or on ice Inside corners are rounded for easy cleaning Both tray and lid are polypropylene and steam autoclavable at 121°C (250°F)

  • Multipurpose Polypropylene Trays

    Bel-Art Products

    …Substantial depth and 8.5 liter (9 quart) volume makes them useful for holding a large quantity of samples in a water bath or on ice Ideal for holding instruments while autoclaving; steam autoclavable at 121ºC (250ºF) Use in a sink when cleaning glassware to reduce chance of damage…

  • Scienceware® No-Wire™ Test Tube Half Racks

    Bel-Art Products

    Compact size polypropylene plastic racks save space in water baths, laminar flow hoods and fume hoods. Available in 5 grid sizes to accommodate the full range of laboratory test tubes Steam autoclavable at 121°C (250°F) Dimensions: 12.8 x 10.5 x 7.2cmH (5.1 x 4.1 x 2.8")

  • Scienceware® No-Wire™ Round Racks

    Bel-Art Products

    …bottom of water baths or ice baths All racks have a base and two tiers of grids with numbered and lettered rows for identification Base has four feet which fit into the top of identical racks for easy stacking Small rack features a removable, snap-on loop handle for easy retrieval Steam

  • Scienceware® Water Bath Racks

    Bel-Art Products

    Steam autoclavable at 121°C (250°F). Dimensions 213mm x 110mm (8-3/8" x 4-5/16"). Durable polypropylene rack that sinks to the bottom of a water bath and remains upright when agitated. Height: 111mm (4-3/8"). Height top deck: 57mm (2-1/4"). Places: 72. Rows: 6 x 12. Tube size: 10-13mm.

  • ROT-X-TRACT-S Rotary Solid-Liquid Soxhlet Extractors

    Organomation

    …organic solvent. Unlike traditional wire or sand baths which are used to heat receiving flasks, the ROT-X-TRACT-S uses a water steam bath which provides gentle even heat to delicate samples. Models 13090 and 13008 use a digitally controlled bath, while model 13070 includes a dial thermostat for…

  • ROT-X-TRACT-LC Corning Accelerated One-Step Liquid-Liquid Extractors

    Organomation

    …drain line out Organomation vacuum insulated concentrator tubes keep delicate samples safe Standard Features: Stepped bath rim and cover disk seals steam chamber Each condenser water line attached to centrally located water manifold Laboratory grade materials stand up to organic…

  • Fiberglass Wall Canopy Hoods

    Hemco

    Canopy hoods are designed to collect and exhaust corrosive vapors, heat, steam, and odors when mounted over areas with water baths, hot plates, or portable equipment. Made of composite resin, the Canopy Fume Hood’s glass smooth surfaces provide superior chemical, corrosion and heat resistance.…

  • Fluid Thioglycollate Medium (FTM)

    HiMedia

    …pressure (121°C) for 15 minutes. Cool to 25°C and store in a cool dark place preferably below 25°C. Note : If more than the upper one-third of the medium has acquired a pink colour, the medium may be restored once by heating in a water bath or in free flowing steam until the pink colour disappears.

  • No-Wire Test Tube Grip Racks

    Bel-Art Products

    …into water baths Features end plates for labeling as well as numbered and lettered rows for tube identification Fold up sides lock firmly into the grip decks; assembly takes only seconds Unloaded racks are stackable Dimensions: 24.8 x 10.5 x 7cm H (9-3/4 x 4-1/8 x 2-3/4") Steam

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.