Simport
-
Tube made of polystyrene / Cap made of polyethylene. These 8 ml screw cap tubes are available either sterile or non sterile. A special tamper evident cap is offered for applications needing the utmost security where sample integrity is of high importance. Tubes are made of optically clear…
-
100 Place Blue Polycarb Freezer Box for 1.0/2.0ml Tubes 4/pk. 5 1/4" x 5 1/4" x 2 1/16" H
-
Made of polypropylene RNase, DNase, Pyrogen and DNA-free Conical bottom facilitates sample aspiration
-
5.0mL ClickLok™ MCT with insert cavity snap cap, designed for processing medium-sized sample volumes. The 16mm tube is compatible with 15mL centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121°C to -196°C.
-
Made of acetal Molded from a special high density polymer, these cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents. The efficient flow-through slots maximize fluid exchange and ensure proper drainage. The one-piece…
-
BioTube™ Rack
SimportMade of polypropylene. The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base of…
-
Chemically resistant and shatterproof, The SecurTainer™ III Specimen Containers are supplied with a leakproof screw cap, particularly important when transporting hazardous material. Ideal for transport and storage of urine, sputum and most liquids or particulate samples. Containers are…
-
This transparent sealing tape consists of a 2.0 mil polyolefin film coated on one side with a pressure sensitive acrylate adhesive which does not interfere with cycle reactions. It is ideal for reducing well-to-well contamination and/or spill over in sensitive PCR applications where the…
-
Made of acetal MICROMESH™ Biopsy Cassettes in QuickLoad™ sleeves are suitable for hoppers that accept plastic sleeves. The cassettes will load in the labeling instrument in one simple operation. The MICROMESH™ offers 0.38 mm square openings with large anterior slots allows…
-
100 Place Green Polycarb Freezer Box for 1.0/2.0ml Tubes 4/pk, 5 1/4" x 5 1/4" x 2 1/16" H
-
Amplate™ Mats
SimportThis flexible sealing cover is used on 96-well plates along with clip down and screw top thermal cyclers and has been proven to be a secure and effective way of sealing. Since it is reusable, it is a nice way to make this step of the procedure cost effective. Dimples on one side of the mat ensure…
-
Made of polypropylene These opaque 96-well PCR plates are for chemiluminescent and fluorescent procedures. Each well has a capacity of 100 µl. Thin-walled and designed for rapid thermal transfer. They are precision-molded to ensure well-to-well and plate-to-plate uniformity. All…
-
Made of polypropylene Caps are available either with or without a silicone washer between the cap and the tube to ensure a positive leakproof seal at all temperatures. As for tubes, these closures are also made of polypropylene, providing the same coefficient of expansion for both, which…
-
Microscope SlideTray™
SimportSlideTray™ microscope slide holder made of HIPS lasting many years even under the most adverse conditions. The SlideTray™ will hold up to 20 microscope slides in an almost horizontal position. Each slide can be easily removed and placed back in its position. The SlideTray™ is…
-
-
Storage Drawer - Long Term
SimportMade of durable, waterproof, heavy-duty cardboard for long term storage. Requires minimal space. Label provided for each box allows recording of specimen number, date and type of specimen. Each box can store up to 165 embedding rings or 250 cassettes. Dimensions: 40.5 cm x 23 cm x 5.1 cm H (15 7/8…
-
The Simport EcoTainer 24™ will biodegrade to become some of the soil’s organic components in less than 7 years instead of up to 400 years when using conventional plastics. The Simport URISAFE®, one of the most innovative 24-HR Urine Containers on the market today, is now…
-
Embedding Rings
SimportMade of high impact polystyrene Embedding rings are suitable for holding and identifying tissue sample blocks and fit well in microtome chuck adapters. The etched writing surface on the ring is marked with an identification number and placed on top of the sample block. Additional paraffin is…
-
Contact Plate
SimportMade of polystyrene These dishes are free from optical distortion and are sterile. The grid is 10 x 10 mm with numbered and lettered squares to facilitate counting and to locate colonies. The D210-17D model is designed with a convex bottom to save on culture medium.
-
This CytoSep™ Cytology Funnel allows 2 sample deposition areas on a single slide. The disposable sample chambers do not need metal clips. Pre-attached filter card. This Sample Chamber is also disposable.
-
Made of specially formulated polypropylene Designed for the storage of biological material, human or animal cells, at temperatures as low as -196°C (but should be used only in the gas phase of liquid nitrogen). The cap features a long skirt for easy one-handed aseptic technique, a super…
-
Made of polyethylene The unique design of the CapLock™ provides extra security against inadvertent cap openings on critical samples or during incubation above 80 °C.
-
Made of polyethylene Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological…
-
Container made of high-density polyethylene Cap made of polypropylene This more conventional style urine bottle is available in 2 sizes: 2.5 L and 3.5 L. However, it incorporates some of the great features of the URISAFE 24 Hr Urine Collection Container. The unique snap valve pour…
-
High quality screw cap sample tubes manufactured of translucent autoclavable polypropylene. Tube with internal threads. Caps are supplied with or without a silicone washer, to ensure a positive leakproof seal at all temperatures. A 1-1/4 turn of the cap is sufficient to seal the vial. Since both…
-
100µl, 200µl, 300µl, 400µl well volume Standard dimensions / robot compatible Polypropylene 384 well plates are designed for HTS applications and are compatible with multichannel pipettes and robotic workstations. All sizes are standard 127.8 x 85.5mm dimensions.…
-
Made of acetal Molded from a special high density polymer, these cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of histological solvents. The efficient flow-through slots maximize fluid exchange and ensure proper drainage. This stack of…
-
Graduated Micrewtube®
SimportMade of polypropylene For your special needs, these tubes are identical to the T341 Series but are graduated and are provided with a white marking area for sample identification. Can be used at extreme temperatures from -196°C to +121°C. Certified RNase-, DNase-, Pyrogen-…
-
Made of acetal polymer Disposable plastic cassettes hold tissue specimens during processing and embedding, as well as in storage. Molded from a special high-density polymer, these patented cassettes keep specimens safely submerged in liquid and are totally resistant to the chemical action of…
-
-
1.2ml External Thread, Freestanding Cryovial, Sterile Silicone Seal, 100/Bag, Certified DNase, RNase, Pyrogen and DNA Free. Fits in rack FR-281G.