Simport, Bottles
-
The SecuRack™
SimportMade of high impact polystyrene This special 50-place rack will hold your 12 x 75 mm and 13 x 100 mm tubes securely in place thanks to silicone tabs surrounding the base of each tube while in the rack. This makes it very convenient to empty tube content before discarding them. Also great for…
-
Made of low density polyethylene These all-in-one pipets eliminate the hazard of broken glass and exposure to infectious materials. Put an end to matching rubber bulbs with glass pipets. Molded from see-through low density polyethylene. Inert to biological fluids and most acids. Can be…
-
This type of material is ideal for manual sealing during PCR work and also for high throughput applications. Adhesive backing makes it easy to apply. Will resist temperatures from -86 °C to +105 °C. Pierceable with a pipet tip for easy access to sample. DMSO resistant. It is recommended to use…
-
Colored Closures with Loops
SimportSix styles of caps to choose from and two sealing types: O-ring seal and lip seal. The cap is molded with a deep internal lip that fits snugly against the interior wall of the tube thus preventing the contents from coming in contact with the seal or threads, thereby reducing the chances of…
-
SlideFile™ Jr. Storage System
SimportBase made of high impact polystyrene / Cover made of polystyrene The Junior model can hold up to 200 slides per unit in just 860 cm3 (53 cu. in.) and is stackable for space efficient storage. Each SlideFile™ Jr. includes a slide box and a removable tray. A tinted hinged cover makes the…
-
Standard 96 well format These tubes use all the space in the 8 x 12 format, facilitating multi-step dilutions and preps, without transferring samples from larger tubes. Compatible with multi-channel harvesters, pipettes, Biomek, and many rotors. Tubes are translucent polypropylene.
-
-
Made of Polypropylene T504AQX screw cap incorporates a pierceable septum made of chemically resistant PTFE on the outside and silicone on the inside, both components being stable over a broad range of temperatures. The septum also acts as a silicone O-ring for better sample protection. It is…
-
Made of polypropylene Caps are available either with or without a silicone washer between the cap and the tube to ensure a positive leakproof seal at all temperatures. Closures and tubes are both manufactured of polypropylene, providing the same coefficient of expansion. The cap features a…
-
-
Flange Plug Caps
SimportMade of polyethylene These caps have two flexible flanges to ensure a leakproof seal. They will fit into test tubes and also in round cuvettes and centrifuge tubes.
-
BioTube™ Rack
SimportMade of polypropylene. The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base of…
-
This transparent sealing tape consists of a 2.0 mil polyolefin film coated on one side with a pressure sensitive acrylate adhesive which does not interfere with cycle reactions. It is ideal for reducing well-to-well contamination and/or spill over in sensitive PCR applications where the…
-
Made of polypropylene Caps are available either with or without a silicone washer between the cap and the tube to ensure a positive leakproof seal at all temperatures. As for tubes, these closures are also made of polypropylene, providing the same coefficient of expansion for both, which…
-
Microscope SlideTray™
SimportSlideTray™ microscope slide holder made of HIPS lasting many years even under the most adverse conditions. The SlideTray™ will hold up to 20 microscope slides in an almost horizontal position. Each slide can be easily removed and placed back in its position. The SlideTray™ is…
-
Contact Plate
SimportMade of polystyrene These dishes are free from optical distortion and are sterile. The grid is 10 x 10 mm with numbered and lettered squares to facilitate counting and to locate colonies. The D210-17D model is designed with a convex bottom to save on culture medium.
-
Made of polyethylene Plug type push-in caps and 2-position snap caps are made of polyethylene for test tubes with outside diameters of 12 or 17 mm. Dual position caps offer two possibilities: the closed but unsealed position where samples are maintained aerobic for microbiological…
-
100µl, 200µl, 300µl, 400µl well volume Standard dimensions / robot compatible Polypropylene 384 well plates are designed for HTS applications and are compatible with multichannel pipettes and robotic workstations. All sizes are standard 127.8 x 85.5mm dimensions.…
-
Combi-Box™ Storage Box
SimportMade of PVC The Simport® Combi-Box™ can be used not only as a storage rack but also as a workstation. The white base will accept all 96- and 384-well plates and an easy to remove transparent cover allows easy viewing of contents. Being only 40 mm high, the stackable…
-
The MultiRack™
SimportMade of acetal polymer A newly designed tube support that can be used all around the lab. The MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available…
-
Made of high impact polystyrene This model is similar to the M710-100 DrainRack™ and can hold up to 100 microscope slides in 50 individual numbered slots. Will resist temperatures between -80 °C and +80 °C. Not autoclavable.
-
Rack for 5.0mL microcentrifuge tubes. Holds 25 tubes. Wells are numbered for easier identification. Reusable, autoclavable and freezable (-90 C). Made of Polypropylene.
-
Vacucap™ Tube Closures
SimportMade of polyethylene An economical way to recap blood drawing tubes, disposable glass test tubes and plastic culture tubes. Flexible VACUCAP™ closures protect from aerosols of highly infectious microorganisms. They guard samples against cross-contamination and laboratory work areas…
-
DrainRack™ for Microscope Slides
SimportMade of high impact polystyrene This rugged tray used as a drain rack can hold up to 200 microscope slides in 100 individual numbered slots. All slides are stored upright for easier insertion and removal. Simply tilt them forward and backward with one finger to easily and rapidly pick up the…
-
Chillblock Centrifuge Tube Rack
SimportThe ChillBlock™ 15 ml and 50 ml Centrifuge Tube Racks are available in two configurations, one of 9 wells for 15 ml centrifuge tubes and one of 4 wells for 50 ml centrifuge tubes. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. Made of…
-
Tubes are made of autoclavable polypropylene and are available either individually or in strips of 8 or 12 detachable tubes. Tubes have a gross volume of 1.2 ml but with a cap in place, they will hold 1.1 ml. Caps are made of polyethylene and are not autoclavable. They are available individually…
-
LockMailer™ Microscope Slide Jar
SimportAt last a tamper evident multi purpose container for mailing, staining or storing microscope slides. Constructed of extra-strong and clear polypropylene, it will hold up to 4 standard 3 x 1 in. or 75 x 25 mm slides vertically. Inside channels are slotted to keep slides safely separated.…
-
Tethered screw cap for 5.0 ml MacrewTube™ Microcentrifuge tubes. Polypropylene. RNase, DNase, Pyrogen and DNA free. Autoclavable. Temp range +121 °C to -196 °C.
-
Alphanumeric grid for better identification Flexible plate for better fitting of tubes in thermal block Can be cut to desired format Corner is cut away to facilitate orientation of plate Inside of tube is smooth and has an inert surface These 48-well PCR plates are thin-walled and…
-
The UniRack™ Jr
SimportMade of polypropylene Versatile and easy to use Two sided Holds up to 25 tubes of 10 to 12 mm Accomodates 16 PCR or 0.2 to 0.5 ml tubes Supplied with handles This smaller model of the UniRackTM can hold up to 25 polystyrene or polyprolylene 10 and 12 mm tubes, such as 10 x…
-
BioTube™ Rack
SimportMade of polypropylene The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base…