Pre-flared, shallow, thin-walled aluminum cap for reinforcing XRF pellets. Commonly used in the production of pressed power sample disks for XRF but also used for OES and other analytical techniques. Forms the bottom and sides of the finished pellet. 31 mm wide x 8 mm deep. Produces pellets 31 mm x…

For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6801C). Will not add Cr like stainless steel components of 6801 vial. Set includes one complete vial plus three extra cylinders. Sample…

Steel Ball Set, 2 x 1/2 in & 4 x 1/4 in: Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls for SPEX SamplePrep 8001 and 8009 Vial Sets. Polystyrene Vial w/Screw-On Cap: For wet or dry mixing of liquids and powders. Vial size 21/8 in. (5.4 cm) diameter x 21/2 in. (6.7 cm)…

3621 Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement,…

Large Stainless Steel Center Cylinder for 6801: For 6801 Vial Set. Used in place of 6801C when polycarbonate cylinder is not compatible with sample. Made of nonmagnetic stainless steel. Extractor/Vial Opener for Large and Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in…

Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

For RoHS/WEEE testing of electronic components for chromium. End plugs and impactor are Cr-free ASTM 06 steel. Will not add Cr to sample like stainless steel components of 6751 Vial. Set includes three extra 6751C cylinders. Sample capacity 0.5 to 4.0 mL.

Shallow, thin-walled aluminum cap for reinforcing XRF pellets. Commonly used in the production of pressed power sample disks for XRF but also used for OES and other analytical techniques. Forms the bottom and sides of the finished pellet. Features Makes sample disks easier to remove from…

A holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can be placed in the Cryo-Station well to be filled and kept cold.…

The 6875D Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill…

While most titer plates can be used in the Geno/Grinder, these sturdy titer plates have been tested extensively with various samples, and resist perforation by steel grinding balls even at high clamp speeds. They can be used for many applications including sample libraries, mother-to-daughter…

Acid washed grinding beads are treated to remove fine particles and contaminants. Sold in package of 100.

Polystyrene Vial w/Slip-On Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn…

Pre-loaded 2 mL disruption tubes are ideal for fast and simple setup - add samples and you're ready to go. Vials are self standing, making it easier to add samples. Pre-filled with your choice of molecular biology grade silica beads, acid washed silica or zirconia beads, silica beads, or steel balls.

Thick, rugged foam block holds 48 standard 5 mL or 4 mL centrifuge vials. Used with polycarbonate and frosted polyethylene vials (#2241-PEF-200, #2241-PC). The holders are designed to hold vials securely in place on the Geno/Grinder during processing. They are lightweight and can also be used on…

For 6881, 6883, and 6885 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

The 6775 Freezer/Mill® is a small cryogenic mill that processes samples ranging from 0.1 - 5 grams. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. The new high resolution display is user-friendly and…

Molecular Biology Grade Grinding Beads are treated to inactivate contaminating enzymes and have been tested accordingly. Low Binding Grinding Beads are coated to reduce non-specific binding of nucleic acids and proteins and are used for lysing dilute samples of cells. Acid Washed Grinding Beads are…

Large Grinding Vial Set: Set includes stainless steel impactor and two end plugs, plus four polycarbonate center cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack…

2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…

The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp typically holds up to 6 x50 mL vials or 48 x 2…

2100 Grinding Ball Dispenser: Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm)…

The Cryoplate keeps sample lids cold during the grinding process. Used with the Cryo-Block or Cryo-Adapter (#2650) for titer plates. The Kryo-Tech accessories are used to chill samples to cryogenic temperature and to maintain temperature during grinding in the Geno/Grinder.

Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

Polystyrene Vial w/Slip-On Cap, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Includes slip-on polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8…

Polypropylene, self-standing 2 mL microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64 inch x 1 27/32 inch long (10 mm x 47 mm). Tube is not pre-cleaned. Grinding load per tube is 60-120 mg; mixing load 1 mL. Sold in package of 500. Ideal for fast and simple…

High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…

For 6751 vial set; sold in units of 4. Also sold in units of 20. Polycarbonate is durable but should be cleaned with hot water and detergent, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

Cryogenic Dewar designed for storing and dispensing small amounts of liquid nitrogen. Sturdy, aluminum, five-wheel roller base makes moving dewar from room to room safe and easy. Includes liquid withdraw device for dispensing liquid nitrogen directly into the Freezer/Mill at rates up to 8 liters…

13 mm Die Set: Used to form KBr disks for IR analysis. Set includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 10 tons (9.1 metric tons); weight 2.2 lbs (1 kg). 40 mm Die Set: To form 40…

For 6801 and 6871 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. Sold in units of 4. NOTE: These products are only available for sale to Domestic U.S. Customers.

2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…