SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components. Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a…

Deactivated Liners for Agilent 5890, 6850,  6890, 7890,  and HP4890

SGE has been making precision chromatography syringes for over 40 years. Our comprehensive range of GC autosampler syringes are designed and tested to meet critical autosampler specifications. Our unique plunger design minimizes bending and seizing, and the cone tip needle point style has been…

MEPS performs the same function as SPE, namely the purification or speciation of samples, but with some significant differences: MEPS works with much smaller samples (as small as 10µL) than full scale SPE MEPS can be easily semi-automated using the custom programming functions of…

Cyanopropylphenyl Polysiloxane Polar phase EPA volatile organics analysis (EPA 624, 502.2, SW-846 8240/8260) Application Areas: Environmental analyses, volatile organics, alcohol analysis, USP G43 Operating Temperature: 1.0-3.0µm film thickness: 0°C to…

eVol® is a digitally controlled positive displacement dispensing system that can be programmed to reproducibly and accurately perform a wide variety of liquid handling procedures. Everyone becomes an expert. eVol® will improve your laboratory workflow and reporting confidence in many ways. 

SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components. Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a…

Trajan SGE syringes have consistently been the choice of global GC & LC manufacturers because of outstanding performance and superior quality in a vast variety of applications. The unique Plunger tip designed ensures a gas-tight seal providing the lowest syringe carryover and outstanding reproducibility.

AOC14, AOC17 and AOC 20 Autosamplers

When selecting an on-column syringe the needle OD must be smaller than the ID of the capillary column with which it is used. Care must also be taken to select the correct needle length to suit the on-column injector.

Spanner (wrench) sizes and uses: 3/16" for use with mini unions, 1/4" for use with 1/16" nuts, 5/16" for use with micro control valves. For standard nuts use reducing short ferrules. For extended nuts use straight or reducing ferrules.

Turn imagination into results with the ProteCol™ range of HPLC columns. With Reverse Phase, Normal Phase and Specialty Phases, ProteCol ensures you have the right phase for your separation needs. With the option of combining inert PEEK coated hardware or traditional stainless steel with each…

SGE's Methyl Deactivated Fused Silica Capillary Tubing is available in a range of sizes. The tubing is chemically inert and thermally stable up to 380°C (716°F). It is ideally suited for use with capillary GC guard columns and transfer lines.

Specifically designed for connecting capillary columns Easy way of connecting guard columns or retention gaps to capillary columns Can be used for repairing broken columns Inert and precise glass lined bore Supplied with 15% Graphite 85% Vespel® ferrules 100% graphite ferrules…

Accuracy and reproducibility ±1% Equipped with repeating adapters Repeating adapters allow the user to preset any desired volume and help prevent plunger blowout at elevated pressures. Also used as a plunger support for low volume syringes.

Gas purifiers are an essential part of your GC analysis. Without the appropriate gas purifier, problems such as noisy baselines, moisture entering GC column, excessive bleed, reduced column lifetime and irreproducible results will occur. These problems are created by hydrocarbons, moisture and…

The coupling makes it easy to connect 1/16" OD tubing to an SGE assembly Provides an inert demountable flow line for 1/16" male fitting

Precision engineered for Capillary LC, ProteCol Unions offer complete versatility for connecting a range of capillary tubing. Manufactured to exacting tolerances and available in PEEK and stainless steel, the zero dead volume design provides faultless butt connections.

Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

Stainless steel 10-32 thread fittings use a non-swaging Kel-F™ or PEEK™ replaceable ferrule Inert contact surfaces make them biocompatible Ideal for applications where corrosive solvents are being used Hexnut with Kel-F™ or PEEK™ ferrules are recommended for use…

Turn imagination into results with the ProteCol™ range of HPLC columns. With Reverse Phase, Normal Phase and Specialty Phases, ProteCol ensures you have the right phase for your separation needs. With the option of combining inert PEEK coated hardware or traditional stainless steel with each…

Gas purifiers are an essential part of your GC analysis. Without the appropriate gas purifier, problems such as noisy baselines, moisture entering GC column, excessive bleed, reduced column lifetime and irreproducible results will occur. These problems are created by hydrocarbons, moisture and…

SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components.Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a vast…

Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

SGE syringes have consistently been the choice of GC and LC equipment manufacturers for many years. They choose our products because their reputation depends on the performance of our components. Our knowledge and expertise in liquid handling technologies has enabled us to design syringes for a…

Polyethylene Glycol (PEG) - TPA Treated Nitroterephthalic acid modified PEG Polar Phase Ideal for low molecular weight acids Application Areas: Volatile free acids, fatty acid methyl esters, alcohols, aldehydes, acrylates, ketones Operating Temperature: …

50% Phenyl Polysilphenylene-siloxane Mid polarity Inert Low bleed High temperature Ideal for a range of EPA methods and pharmaceutical applications Application Areas: EPA methods 604, 608, 8060, 8081, triazines/herbicides, drug screening, steroids and a variety of…

Deactivated fused silica tubing is an essential ingredient in maintaining a high performance chromatography system. Chemically inert and thermally stable up to 380°C. Ideal for biotechnology applications. Available in 0.025 - 0.53mm ID, quality guaranteed.

Each plunger is individually fitted for each microsyringe for perfect sealing. Accuracy and Reproducibility: ±1% Borosilicate Glass Barrel OD: 8mm Scale Length: 60mm

VARIAN INLET LINERS - For Varian Injector Models 1075/1077, 6.3 mm O.D. x 72 mm Length Precision placement of quartz wool improves reproducibility Manufacturer’s guarantee to fit Simple to install High temperature deactivation Quartz wool is secured by means of a…