MilliporeSigma, UN1789, Supplies
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034 (ISO Guide 34). This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST or BAM.Certified content incl. uncertainty and expiry date are given on…
-
Platinum Standard for ICP
MilliporeSigmaTraceCERT ® , 1000 mg/L Pt in hydrochloric acid RIDADR: UN 1789 8 / PGIII
-
Recombinant protein fragment of Human MORN1 with N-terminal His6ABP (ABP = Albumin Binding Protein derived from Streptococcal Protein G) fusion tag. Synonyms: FLJ13941 Purity: >80% (SDS-PAGE) Storage: -20C Application: Suitable as a blocking agent using corresponding antibodies. …
-
This product is provided as delivered and specified by the issuing Pharmacopoeia. All information provided in support of this product, including MSDS and any product information leaflets have been developed and issued under the Authority of the issuing Pharmacopoeia.For further information and…
-
TitriPUR® Hydrochloric acid
MilliporeSigmaSynonyms: Hydrochloric acid solution; Hydrogen chloride solution; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Density: 1.00 g/cm3 at 20 C Legal Information: Titripur is a registered…
-
TitriPUR® Hydrochloric acid
MilliporeSigmaSynonyms: Hydrochloric acid solution; Hydrogen chloride solution; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Density: 1.03 g/cm3 at 20 C Legal Information: Titripur is a registered…
-
-
Acidity certified reference material
MilliporeSigmaThis Certified Reference Material (CRM) is produced and certified in accordance with ISO 17034 and ISO/IEC 17025. All information regarding the use of this CRM can be found on the certificate of analysis. Other Notes: Values of analytes vary lot to lot. Some lots may not contain all analytes.
-
UN No.: UN1789 pH: Solubility: (20°C) soluble Melting Point: -28°C Boiling Point: 45°C Vapor Pressure: 190 hPa (20°C) Density: 1.19 g/cm3 (20°C)
-
OmniTrace® Hydrochloric Acid 34-37%
MilliporeSigmaFormula: HCl in water Formula Weight: 36.46 CAS Number: 7647-01-0 Synonym(s): Muriatic Acid
-
TitriPUR® Hydrochloric acid
MilliporeSigmaSynonyms: Hydrochloric acid solution; Hydrogen chloride solution; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Density: 1.02 g/cm3 at 20 C Legal Information: Titripur is a registered…
-
TrueGel3D Polymer Modifed for slow gelling (SLO-PVA)
MilliporeSigmaPVA polymers are functionalized with thiol-reactive groups, which react at a slower rate with thiol groups of crosslinkers (CD/PEG crosslinkers) to form stable hydrogels. The slow gelation kinetics allows enough time to conveniently manipulate the solution before the onset of homogenous gel…
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST.Certified content incl. uncertainty and expiry date are given on the certificate.…
-
Suprapur® Hydrochloric Acid 30%
MilliporeSigmaSynonyms: Hydrochloric acid solution; Hydrogen chloride solution; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Purity: 30% Melting Point: -50 C Density: 1.15 g/cm3 at 20 C …
-
The gel is formed by stable thioether bonds between maleimide groups of PVA (FAST-PVA) and thiol groups on CD cell-degradable crosslinker. Malemide-functionalized PVA is specifically used to decrease the time for gel formation. The PVA polymer does not have cell attachment sites, but it can be…
-
The gel is formed by stable thioether bonds between maleimide groups of dextran (FAST-DEXTRAN) and thiol groups on CD cell-degradable crosslinker. Malemide-functionalized dextran is specifically used to decrease the time for gel formation. The dextran polymer does not have cell attachment sites,…
-
The gel is formed by stable thioether bonds between maleimide groups of PVA (FAST-PVA) and thiol groups on PEG non cell-degradable crosslinker. Malemide-functionalized PVA is specifically used to decrease the time for gel formation. The PVA polymer does not have cell attachment sites, but it can be…
-
TrueGel3D Buffer pH 5.5 600 mul solution, 10X concentrated
MilliporeSigmaTrueGel3D buffer pH 5.5 is a component of the TrueGel3D Hydrogel system. The TrueGel3D buffer with pH 5.5 is recommended for fast gelling hydrogels, because the acidic pH (lower pH) slows down the formation of a gel allowing homogenous mixing of polymer and crosslinker before it solidify. However,…
-
Acidity - WP proficiency testing material is produced in accordance with ISO/IEC 17043:2010. Also referred to as non-Potable water or Water Pollution sample, this product is produced according to TNI requirements. However, please note, this sample may include non-TNI analytes as well. The higher…
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST. Certified content incl. uncertainty and expiry date are given on the label. Information…
-
Hydrochloric acid, ACS reagent, 37%
MilliporeSigmaMolecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Purity: 36.5-38.0% (ACS specification); 37% Density: 1.2 g/mL at 25 C (lit.) Application: Chlorine source for safer, greener chlorination of aromatic…
-
Hydrochloric Acid 32% For Analysis EMSURE®
MilliporeSigmaUN No.: UN1789 pH: Solubility: (20°C) soluble Melting Point: -40°C Boiling Point: 83 - 90°C Vapor Pressure: 21.3 hPa (20°C) Density: 1.16 g/cm3 (20°C)
-
-
Declere(R)
MilliporeSigmaDeclere may be used whenever immunohistochemistry staining is performed on formalin-fixed, paraffin-embedded tissue sections. Using this product encourages standardization of the pretreatment procedure, thereby producing more consistent, more reliable results. Storage: room temp Legal…
-
Synonyms: Hydrochloric acid; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Density: 1.19 g/cm3 at 20 C; 1.2 g/mL at 25 C (lit.) Legal Information: EMSURE is a registered trademark of…
-
Hydrochloric Acid 32% Extra Pure
MilliporeSigmaUN No.: UN1789 pH: Solubility: (20°C) soluble Melting Point: -40°C Boiling Point: 83 - 90°C Vapor Pressure: 21.3 hPa (20°C) Density: 1.16 g/cm3 (20°C)
-
TitriPUR® Hydrochloric acid
MilliporeSigmaSynonyms: Hydrochloric acid solution; Hydrogen chloride solution; Hydrogen chloride solution Molecular Formula: HCl Molecular Weight: 36.46 Linear Structural Formula: HCl MDL Number: MFCD00011324 Density: 1.01 g/cm3 at 20 C Legal Information: Titripur is a registered…
-
This certified reference material (CRM) is produced and certified in accordance with ISO/IEC 17025 and ISO 17034. This CRM is traceable to SI unit kg and measured against primary material from an NMI, e.g. NIST. Certified content incl. uncertainty and expiry date are given on the label. Download…
-
OmniTrace Ultra™ Hydrochloric Acid
MilliporeSigmaReagent Grade Formula: NaOH in water Formula Weight: 40.00
-
-
The gel is formed by stable thioether bonds between maleimide groups of dextran (FAST-DEXTRAN) and thiol groups on PEG non cell-degradable crosslinker. Maleimide-functionalized dextran is specifically used to decrease the time for gel formation. The dextran polymer does not have cell attachment…
-
Pt-Co/Hazen/APHA Colour Reference Standard
MilliporeSigmaASTM D 1209 (ASTM colour 30) RIDADR: UN 1789 8 / PGIII