MTC Bio’s hinged lid boxes are made of recyclable cardboard, with a liquid resistant outer coating. They are shipped fully assembled with 81 place or 100 place cardboard dividers. Each box has drain slots on the bottom surface and numbered grid markings in almost every conceivable location…

MTC Bio’s 5mL Five-O™ MacroTubes™ take all of the conveniences of standard 15mL conical tubes and scales them down for space efficiency and decreased natural resource consumption. Useful from -86°C to 110°C, these tubes are a valuable resource for boiling and for sample…

Sterile, and individually wrapped RNase, DNase and Pyrogen free Easy peel wrappers Flat markable screw-caps MTC Bio has taken the same screw-cap conical tubes that you know and trust and repackaged them in to individual sterile packets. No more fumbling around with open bags or…

Advance design for faster flow-through Superior ventilation prevents clogging/spills Available in 40µm, 70µm, and 100µm porosity Interlocking and stackable 1.5mm feet for use in dishes or plates RNase, DNase, pyrogen and cytotoxin free Sterile (gamma) and…

These unbreakable, one-piece pipettes eliminate contaminated rubber bulbs, broken glass and exposure to infectious materials. They are made of ultra-clear, low density polyethylene (LDPE) and are ideal for microbiology, blood banking, hematology, immunology, and urinalysis. Sterile pipettes are…

ClearSeal™ sterile screwcap microtubes come in a variety of sizes, cap configurations, graduation options, and even a loop-cap option for the 2.0mL. Made from ultra-clear polypropylene, these screwcap microtubes include assembled caps with silicone O-rings that assure a leakproof seal from…

These high temperature autoclavable bags are manufactured from heavy gauge polypropylene material that is not only more puncture-resistant than polyethylene, but also withstands autoclaving at temperatures up to 136°C (250°F). Their ability to contain is completely unaffected at standard…

The ProPette LE™ is the next generation of high precision liquid handling instruments from MTC Bio. This newest addition to the Propette family features improved actuation forces and a nearly 20% reduction in overall weight. Every aspect of accuracy, reliability and user comfort has been…

BenchBin™ Benchtop Biohazard Bin 1.5L, 7 x 5 x7in, 1/ea BenchBin™ Starter Kit includes BenchBin  and 400 red 8.5 x 11" autoclave/ biohazard bags

MTC Bio’s benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. No. R1030 is a 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is…

These reversible racks are designed to keep 0.5mL and 1.5mL( up to 2.0mL) microcentrifuge tubes organized and upright. Made of polypropylene, choose the blue rack for 60 tube capacity (5 rows of 12 tubes) or the larger orange rack for 96 tube capacity (8 rows of 12 tubes). Both racks have…

No matter what size your Western blot is, there’s a box that fits it perfectly. With boxes that are correctly matched to common blot sizes, you can fit more blots on shakers/rockers while keeping reagent and antibody usage to an absolute minimum. Additionally, all corners are formed at 90°…

No matter what size your Western blot is, there’s a box that fits it perfectly. With boxes that are correctly matched to common blot sizes, you can fit more blots on shakers/rockers while keeping reagent and antibody usage to an absolute minimum. Additionally, all corners are formed at…

These unbreakable, one-piece pipettes eliminate contaminated rubber bulbs, broken glass and exposure to infectious materials. They are made of ultra-clear, low density polyethylene (LDPE) and are ideal for microbiology, blood banking, hematology, immunology, and urinalysis. Sterile pipettes are…

These unbreakable, one-piece pipettes eliminate contaminated rubber bulbs, broken glass and exposure to infectious materials. They are made of ultra-clear, low density polyethylene (LDPE) and are ideal for microbiology, blood banking, hematology, immunology, and urinalysis. Sterile pipettes are…

MTC Bio's Sample Sealer™ leak-proof and airtight bags are the ideal for sterile sampling and storage of liquid, powder or solid samples.

These new slides have a positive charge that makes the surface ideal for cell, tissue and general sample adhesion. Typical samples have a negative charge and are therefore attracted to the positively charged slide surface, significantly reducing “float”. Slides are made of high…

MTC Bio’s new BowTie™ Biohazard Bags apply a modern touch to a basic lab necessity that hasn’t been improved in decades. These clearly marked bags are equiped with an exclusive easy-pull drawstring. They also include a sterilization indicator area that changes color after…

MTC Bio’s new DuoClick™ tubes feature a unique, patent pending screw closure system. DuoClick tubes completely eliminate the excess force, splashing and general frustration of traditional snap-cap culture tubes. The advanced cap design includes two distinct positions for aerobic and anaerobic…

ProPette™ MPC is the precise and easy to use manual pipette controller that 's always ready to use. After attaching a pipette, one squeeze of its large rubber filling bulb is all it takes to start pipetting – there are no wires, no tubing and no battery to recharge! Begin aspirating by touching the…

BioBucket™ is a general laboratory container that every lab could benefit from. Its collapsible nature makes it the ideal container for any lab looking to conserve storage space. BioBucket can be used as an ice bucket to keep samples cool over long periods of time, or as portable liquid container.…

MTC Bio’s Erlenmeyer Shaker Flasks are made of polycarbonate, PETG, or styrene/butadiene (Jumbo Flasks only). The polypropylene screw caps are vented with 0.2µm membranes to increase air transmission and enhance cell growth. The mouth size conforms with international SBS standards, for quick,…

These disposable sterile tubes are made of high quality polypropylene (PP) plastic that will withstand temperatures from -190° to +120°C. They are also available in crystal clear polystyrene (PS) with a range of 0° to 70°C. Caps are made of polyethylen

Ice Rack™ - detachable lid, tube platform, and base, numbered cavities, 6/cs 72 × 0.5mL tubes accepts snap cap and screw cap 0.5mL to 0.65mL tubes 72 × 1.5mL tubes accepts snap cap and screw cap 1.5mL to 2.0mL tubes 100 × 1.5mL tubes accepts snap cap and screw cap…

These new tips are designed to fit MTC’s exclusive 300µL single channel pipettes.  Many researchers  have recognized the need for an accurate pipette for volumes above 200µL, which is a range that is not well served by traditional 1mL pipettes. The MTC Bio 300µL…

MTC’s new Bio.Wand™ uses UV light (265 to 280nm) to disinfect any object/surface in the lab and beyond. Bio.Wand™ can be set for a standard one-minute cleaning cycle or a more intense three-minute cycle. Simply press the power/start button and hold the light 1-2 inches from the…

These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…

Halo Pipettors take a modern approach to classic liquid handling. As one of the lightest pipettors ever introduced, Halo Pipettors dramatically reduce risk of repetitive stress injury and the general shoulder, arm, and hand fatigue associated with daily pipetting. Reduced actuation forces and…

Cardboard freezer boxes for 5mL MacroTubes. MTC Bio's new boxes are designed to fit Screw-cap (36 tubes) and Snap-cap (25 tubes) type 5mL centrifuge tubes. The 17mm round holes keep tubes upright and far more secure than traditional square divider grids. Alpha-numeric indexing is provided in…

The sealing options in the Pure•Amp™ line include clear plastic film for end-point PCR, two optically clear films for qPCR, plus one pierceable aluminum membrane for storage and/or PCR. All Pure•Amp™ sealing products are pre-cut for a perfect fit on the…

Conical 10ml, 15ml, and 50ml centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 10ml or 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a…

Whether your lab is focused on cell culture, microbiology, molecular studies or PCR, you use extra care to prevent DNA and microorganism contamination. But even though you use gloves, sterile plastics and take all the proper precautions, your pipettes are used over and over, often by multiple…