IBI’s PR-40 and PR-42 have four fluorescent orange angled shelves that ensure your pipettes remain safely in place, while adding a touch of color to your lab. The PR-40 and PR-42’s notched shelves also offer easy access to many different pipette lengths. Depending on the size of the pipette, the…

IBI’s CS-9615 is a Casting Fixture built to hold and seal the GB-9615, 23.5cm (wide) x 15cm (long) Gel Bed, during the pouring of agarose gels. This fixture seals both ends of the gel bed and once the agarose has cooled, the gel bed can be easily removed. The CS-9615 is constructed of…

The IB50000B DNA Start-Up kit is a great way to get your lab equipped with everything needed to run electrophoresis gels in a 5x7cm format. The IB50000B is a great value on a great system with quality molecular biology grade reagents! This Start-Up Kit comes complete with: Lab-Pal Horiz.…

Well Width: 4.0mm Sample Volume per mm Gel Thickness: 6.0ul The CSD-1527, 1.5mm x 27 tooth comb is compatible with the JSB-302 Double-Wide Mini Gel-O Submarine system. This comb requires the use of the CH-302 comb holder for use in the JSB-302 system and is included with the purchase of…

For use following cell lysis measures including lysis reagents, grinding via micropestle, and shearing via passing the lysate through a 20-G needle Designed to filter out the excess tissue materials and contaminants prior to the RNA binding step IBI replacement MINI Total RNA Filter…

Well Width: 5.8mm Sample Volume per mm Gel Thickness: 8.7ul The CSD-1516, 1.5mm x 16 tooth comb is compatible with the JSB-302 Double-Wide Mini Gel-O Submarine system. This comb requires the use of the CH-302 comb holder for use in the JSB-302 system. These combs are press-cut from…

The JSB-96 is designed for quick-screening a large number of samples while utilizing a limited amount of agarose (100ml). It is ideal for for PCR RFLP analysis or plasmid screening. The JSB-96 microtiter plate format can run all samples as well as standards and blanks in under 90 minutes. The…

The IBI Blot Washer system provides an economical way to automate your western blotting procedures while reducing background issues. The pump/control unit coupled with the 4L wash and waste reservoirs provide automated dispensing and aspiration of western blot reagents. The IBI Blot Washer system…

Gel Size: 20cm(W) x 25cm(L) Buffer volume: 1200ml The IB56000 HR2025 is a high resolution system ideal for separation of nucleic acids in agarose gels. It is also designed for rapid screening of PCR fragments, RFLP analysis or plasmid screening, field inversion, genomic DNA separations and…

The IBI "Lab-Pal" has been designed with the teaching lab in mind. The IB50000 utilizes two glass slides, measuring 2" x 3", for casting the agarose. The small glass slide format is ideal for minimizing agarose use while still being an excellent teaching tool for students just…

For use following cell lysis measures including lysis reagents, grinding via micropestle, and shearing via passing the lysate through a 20-G needle Designed to filter out the excess tissue materials and contaminants prior to the DNA binding step IBI Replacement MINI Genomic DNA Filter…

The JSB-30 is a 7.5cm x 10cm mini gel in a . horizontal format that will accommodate up . to 18 samples per run. The ideal unit for PCR, . fragment analysis or recombinant screening. Constructed of heavy-duty 1/2" cast acrylic . for years of dependable service. The JSB-30 also provides the user…

Arrange your pipettes with a 3-, 4-, or 6-place IBI pipette stand. The fluorescent orange shelves accept most major brands of pipettes, and we help brighten up your bench top as well. These pipette stands are made from durable 1/4” cast acrylic for years of use, and the skid resistant feet…

Gel Size: 7cm(w) x 10cm(l) Buffer volume: 375ml Designed for quick screening and rapid, linear separation of nucleic acids. The QS710 (IBI No. IB51000 ) requires minimal set-up and provides excellent band resolution and consistent lane-to-lane mobility for accurate results. A versatile system,…

The IB57020 is a UVT casting tray designed for use in the IB57000 (HR2525 Horizontal Electrophoresis System). It is constructed of OP-1 grade cast acrylic to allow the passage of UV light during the viewing the elecrophoresis gel run. This tray produces a gel measuring 25x25cm, and has 4 equal…

IBI MAXI FlexTubes are typically used for the extraction of proteins, RNA, DNA, or oligonucleotides (>20nt) from polyacrylamide, agarose, and or any other gel matrix in a running buffer. They are also used for dialysis or buffer change of small volumes (0.1-3ml), preparation of protein samples…

The IBI MaGELin IB94300 allows for rapid analysis of protein and nucleic acid samples in an 10cm x 10cm pre-cast polyacrylamide gel format. Analysis can be completed two to three times faster than is possible with conventional 16cm gels while maintaining comparable resolution. This system has been…

IBI’s BETA-GARD™ storage containers provide safe storage and transport of ß-emitting samples. The storage containers hold most test tube racks, small bottles, vials, and containers. The IBI storage containers make transport from bench to bench easy while protecting the user and lab from…

Gel Size: 25cm(W) x 25cm(L) Buffer volume: 1500ml This high throughput system is designed to complete analysis of up to 200 samples from microtiter plates and is ideal for running all types of precast gels. The large format can run gels in less than 30 minutes. This…

The IB51000B DNA Start-Up kit is a great way to get your lab equipped with everything needed to run electrophoresis gels in a 7x10cm format. The IB51000B is a great value on a great system with quality molecular biology grade reagents! This Start-Up Kit comes complete with: QS-710 Horiz.…

The GB-3210 is a 15cm (wide) x 10cm (long) UVT gel casting tray for use in the JSB-302 Double-Wide Mini Gel-O Submarine system Ideal for saving agarose when shorter gel runs are sufficient This Gel Bed mates with the CS-3210 casting fixture for pouring agarose gels Constructed of…

IBI replacement DNA columns and collection tubes are for use with IBI Genomic DNA Extraction kits or comparable competitive Genomic DNA Extraction kits that utilize the Lysis, bind, wash and elution method. These replacement columns and collection tubes are ideal for using up extra reagents from…

Gel Size: 43cm x 36cm Buffer volume: 530 ml Overall height: 48 cm Unit footprint: 49 x 22 cm The IBI STS-45i sequencing unit has a complete list of features that has made it a favorite in laboratories worldwide. Featuring easy turn knobs that are designed for ease of…

IBI’s GB-9615 is a 23.5cm (wide) x 15cm (long) UV transmittant Gel Bed for use in the JSB-96 Ultra-Wide Mini Gel-O Submarine system. Ideal for saving agarose when shorter gel runs are sufficient. This Gel Bed mates with the CS-9615 casting fixture for pouring agarose gels. The GB-9615 is…

IBI's CS-3210 Casting Fixture Tray is an accessory for JSB-302 Double-Wide Mini Gel-O Submarine system. It's built to hold and seal the GB-3210 - 15cm (wide) x 10cm (long) Gel Bed, during the pouring of agarose gels This fixture seals both ends of the gel bed and once the agarose…

IBI’s BETA-GARD™ formed angled radiation shields are constructed of heavy duty 1/2” cast acrylic to provide maximum safety against Β-radiation. These formed shields allows an unobstructed view of your work area, so transferring samples or other procedures are not distorted. …

Gel Size: 22 x 20 cm Buffer volume: 550ml each chamber Designed for high resolution DNA or protein separations. It is ideal for mapping purposes or for blotting applications.

The PR-10 pipette filler stand is a colorful utility stand for your lab’s pipette fillers. It is constructed of sturdy and durable 1/4” cast acrylic for years of continued use. The 1” diameter hole accepts most mechanical pipette fillers with ease. The skid-proof rubber feet also…

Gel Size: 10cm(w) x 15cm(l) Buffer volume: 500ml The MP1015 is the ideal multi-purpose gel box for both extended high resolution, linear runs, and economical quick screens. The MP1015 contains buffer recirculation ports for long runs requiring recirculation. The MP1015 is constructed of…

The MaGELin Western Transfer System provides the user with a complete system for the rapid transfer of protein or peptide samples or nucleic acids separated by mini polyacrylamide gels to 8cm x 10cm or 10cm x 10cm membranes. The unit accommodates two cassette sandwiches for simultaneous…