Economical, translucent, rigid polypropylene bottles are autoclavable, leakproof and can withstand temperatures up to 121°C. Specially designed polypropylene closure provides leakproof seal and has hole for tagging.

Our stir bars feature ALNICO V magnetic cores which are one of the most powerful permanent magnet alloys available. Stir bars should not be stored in a random mass, or dropped on a hard surface especially steel. Stir bars should be stored in pairs to maintain magnetic strength.

Stir Bar Micro, 1.5X15 mm ( 1210C97 ) Product Dimensions (l x w x h) : 0.591x0.073x0in 15 mm length. For stirring  test tubes, micro-beakers, etc... Covered with polytetrafluoroethylene white resin. Stir Bar Micro, 1.5X8 mm ( 1210C98 ) Product Dimensions (l x w x h) :…

Special no-drip pouring spouts Constructed of chemically resistant, autoclavable polypropylene For general laboratory use. Will withstand temperatures up to 120°C. Graduated in mL.

Heavy trays fabricated with with 1/4" thick high density polyethylene. All welded construction. Trays can be customized with spigots and covers which are fabricated to order. Additional sizes and materials available upon request.

Square ratio beakers are the safe, convenient alternative to griffin style beakers. These beakers feature a vertical lip around the top of the beaker which serves two purposes: first the lip contains many spills that may occur with the rounded design of a griffin style beaker. Second, this vertical…

Fabricated trays of polyethylene are heavy wall (3/16"), corrosion resistant and durable.

Dispensing Trays. Heavy trays fabricated with 1/4" thick high density polyethylene. All welded construction. Dispensing trays are supplied with polypropylene dispensing valve located as close to the tray bottom as possible, but can be in other locations upon request. All trays below can be…

Molded to class B tolerance in translucent polypropylene with a tooled neck. Each flask is individually calibrated. Supplied complete with polypropylene stoppers and have the material and temperature characteristics printed in green.

This sturdy stand is fabricated of 3/8" clear  acrylic adding style and function to a normally wall mounted rack. The 4.5 lb stand includes all hardware needed to attach to the 5918-0000 drying rack and also comes with a 5' section of our 1085-0012 vinyl laboratory tubing. Further,…

No eye level distortion, flat Extra wide top with arm cutouts Can be comfortably used either standing or sitting Lower area of shield is just 12" wide Fabricated from 1/4" clear acrylic with non-skid feet. Face area dimensions: 20" W x 15" H.

Fixed volume 5uL to 1000 uL MiniFIX Micropipettes Cost effective Ideal in schools for routine applications where speed and precision is required Color-coded button for easy volume identification Accommodates all common tips Good for approximately 5,000 pipettings This new…

Manufactured in the United Kingdom, the QWS4 230V water still combines high performance and reliability with value for money. This new Quickfit® water still features a high quality Pyrex® glass boiler and condenser. Output capacity 4Liters/Hour pyrogen free* single distilled water …

Translucent polypropylene. Resistant to breakage. Blue graduations, ring mark and inscriptions. Ideal for fluoro and silicate chemistry. Recommended cleaning with mild alkaline detergent up to 60°C. Note: Exposure to temperatures above 60°C may cause volume changes.

Developing flat bottom dishes. Dishes come in different sizes for various size prints. Made of white high-density polyethylene (HDPE) All dishes have pouring lips, except for 1217C45, 1217C46 and 1217C47 Easily cleaned Standard photographic paper

Dynalon’s new versatile modular liquid handling series fits all your needs. Whether sampling from drums or rail cars, stirring vats or dipping chemicals from a bath... we have the configuration to fill your requirements. Components are available piecemeal, as intuitive kits or buy the…

Make quick conversions with dual metric and English scales Made from translucent high clarity polypropylene - food grade resin Graduated in Metric and English in attractive blue print with scales on both sides - easy to read for right and left handed use Tapered and space saving;…

Polypropylene Molded graduations - in liters Low form for added stability Autoclavable; use up to 135°C Autoclavable, highly translucent especially when filled with liquids. Permanent molded in graduations. Resistant. No drip spout. Thumb grip on handle.

Product Dimensions (l x w x h) : 9.75x6.687x33.56in This heavy white center rod stand polyethylene resistant stand weighs 5.5lbs. It comes with a polyethylene coated metal rod which screws into the base. Available with the hole in the center or at the short edge (1212W75 ). The base…

Product Dimensions (l x w x h) : 7.062x6.75x17.875in Pipette Disposal Bin, beta protection. Fabricated from 3/8” Acrylic sheet certified by an independent organization to be 100% effective in shielding against beta radiation. Radiation bin features hinged lid and easy access opening…

Reduce the tare weight correction with this light weight, autoclavable, reusable translucent bottles. Airtight push on lids included. Highly resistant to acid attack. No internal shoulders to avoid use of spatulas. Tops can be squeezed to assist pouring. Remove lid before autoclaving. …

Manufactured from chemically-resistant polypropylene Specifically designed for easy effective sampling of 55 gallon drums or vessels with openings as small as 2 inch id The 100 mL bottle easily passes through the opening for quick filling The 4-inch T-design handle prevents dropping of sampler…

Autoclavable at 121°C Polypropylene 500mL bottle fitted with one-piece PP closure (34mm neck ID) Closure features precision jet-tip aperture for fine control Dimensions 163mm height x 75mm diameter

These wide mouth lab bottles are available in translucent or amber rigid high density polyethylene. The amber lab bottles can be autoclaved. Bottles are ideal for storage and handling of liquids or solids. Translucent bottles are made with FDA approved resin for non-contaminating storage of…

Straight-side polystyrene containers with 180 ml capacity, supplied with white polypropylene screw closures. These "glass-clear" polystyrene jars have many uses  in the lab and industry. Lightweight and easy to  fill. Maximum temperature is 70ºC.

The cylindrical jars are supplied with insert and cap.  Thanks to the large neck they are suitable for powders and  solid specimen.

Analytical funnels made of autoclavable polypropylene. These funnels have long, narrow bore that works best for liquids.

Eye Wash Station Dimensions (l x w x h) : 11.75x4x11.75in First EYD Station. Emergency eye wash station with  integral eye wash bottle. This station is molded  of high-impact green polystyrene complete with polyethylene  eye wash bottle. The unique bottle is designed to…

Translucent, low-density Polyethylene wide mouth bottles with leakproof polypropylene screw closure. Made from FDA approved resin for use with food products. Bottles have greater flexibility and impact resistance than high-density Polyethylene bottles.

Designed for increased stability on the bench and ease of handling particularly in restricted spaces. High clarity Polypropylene - safe unbreakable with good chemical and temperature resistance Self-draining base eliminates water collection during washing in an automatic lab…

Stirring rods are available in two versions: Pure PTFE solid stirring rod with tapered end, and pure PTFE stirring rod with mild steel core. The stirring rod version with steel core can be bent into a permanent shape. Inert and will not scratch, use up to 280°C.

High-density polyethylene bowl with securely welded solid handle Handy for sampling and dispensing corrosive liquids Available in a variety of sizes