Kartell LDPE graduated wash bottles feature a wide mouth for easy, safe filling. Color coded caps for easy identification. Ingenious cap designed to avoid involuntary dripping due to pressure build up in bottle - where toxic or radioactive material is being used. Suitable for foodstuff

This sturdy stand is fabricated of 3/8" clear  acrylic adding style and function to a normally wall mounted rack. The 4.5 lb stand includes all hardware needed to attach to the 5918-0000 drying rack and also comes with a 5' section of our 1085-0012 vinyl laboratory tubing. Further,…

Beta Sample Storage Boxes allow for safe and easy  storage and transport of samples. Removable shelves and racks are available in many sizes to accommodate different microcentrifuge tubes. Units are designed to allow icing of samples if desired. Supplied with non-skid feet and radiation…

White, opaque jars with tight-fitting lids Designed to simplify and standardize the handling and storage of specimens Excellent chemical resistance Cannot be attacked by formaldehyde, weak acids or bases. Resist freezing or boiling temperatures. Easily disposable but sturdy enough for reuse.

Stir Bar For Beaker 44 mm 100 mL (1212Y93) Product Dimensions (l x w x h) : 1.775x0.56x0in Stir Bar For Beaker 62 mm 250 mL (1212Y94) Product Dimensions (l x w x h) : 0x2.44x0in Stir Bar For Beaker 70 mm 500 mL (1212Y95) Product Dimensions (l x w x h) : 0x2.76x0in …

Transparent Polystyrene and optically clear Stackable For single use Sterile by irradiation (1183C15 is gamma irradiated; 1183C16 is E-Beam irradiated) Consistent flatness allows for even media distribution Certificate of Sterilization upon request Traceable by batch number

Available in 3 volumes and 3 lengths with 60° side angles. These ribbed long stem funnels are made from food grade polypropylene and take standard size filter papers. Ideal for hard to reach areas with or without narrow openings.

Easy-squeeze 250ml and 500ml wash bottles with integrally molded tube. Requires only gentle pressure to eject and accurately  direct the liquid. The dispensing tip can be cut back  to increase the flow rate. Maximum temperature of  LDPE is 80°C.

Versatile 3/8" full gauge acrylic Beta shield provides enclosed three sided stand alone protection as well as convenient fold-away storage. May also be used as U-shaped shield. Combine with 1212V21 to create a full four sided enclosure. Dimensions: 16-1/2" H with 14" front and…

BenchGuard™ roll dispenser. BenchGuard and BenchGuard  Extra have highly absorbent upper surfaces that contain  spills and a tough polycoated base to protect your  work surface. Standard BenchGuard absorbs up to 400ml  per square meter, the competition absorbs 274ml or…

Graduated Square Bottle, Wide Mouth High-Density Polyethylene, Amber 2L ( 1212Y25 ) Product Dimensions (l x w x h) : 4.557x3.574x9.75in Amber graduated 2 liter rectangular bottle , high-density Polyethylene for easy storage of bottles on shelves. Enhanced stability when in use with an…

Product Dimensions (l x w x h) : 12.75x12.75x28.125in Extra large capacity storage bins hold carboys, linens, bench liners, etc. Units come with four heavy duty casters for complete portability. Full shielding from Beta emitters keeps personnel safe during transports. Supplied complete with…

Pail Graduated Polypropylene 12 L (1212Z96) Product Dimensions (l x w x h) : 13.937x12.75x13in Pails, 3 gallon capacity. Unique natural polypropylene buckets. Able to withstand a large range of corrosives. Graduated in one liter increments. Autoclavable.   Pail Graduated…

Rack Hydrometer Polypropylene Tall ( 1212X17 ) Product Dimensions (l x w x h) : 7.812x8.5x10in 7 in plate height tall Hydrometer Racks. These 18 place polypropylene racks are specially designed to safeguard glass hydrometers. The three tiered rack with handles allows easy transport and…

Pipette Tips Yellow, Bulk (1212W12) Product Dimensions (l x w x h) : 1.97x0.29x0in Premium Quality Pipette Tips, yellow 2 - 200 µl. Accurate dimensioning and tight fit, clean, accurately centered tip orifice, excellent surface properties - smooth and free from edges, very…

Radiation Protection Shield is designed with a lower bend and wider top gives greater visibility of work surface and assures greater protection from splashes to face and neck area. The gentle bend from the base allows the technician to observe the working surface from a comfortable sitting…

Useful for the transport and benchtop storage of vials, bottles, containers, instruments and various laboratory accessories. Made of food grade high impact polystyrene. Very durable.

These low density polyethylene bottles are supplied with a bellow-type dropping pipette. Pipettes are graduated for nominal indication of amount of liquid being drawn. Bellows-shaped bulb makes use easy and provides excellent drop formation.

When transparency or reduced gas permeability are important, ask for the Dynalon 6 Gallon PET carboy. Made from 100% pure food grade PET resin, the product contains no plasticizers or BPA. A wide 4 inch mouth provides easy access for cleaning, sanitizing and filling. Molded graduations mark…

Lab Tissue Dispenser, Small (1212V42) Product Dimensions (l x w x h) : 5x5.125x3.375in For small Kimwipe boxes. Acrylic clear holder adds extra weight for one-hand dispensing of Tissue Wipes. Wall or bench mount with either two strips of double sided tape or mounting screws (not…

Product Dimensions (l x w x h) : 0x1x2.25in Vials. Hinged Snap Cap. General purpose 25ml low-density polyethylene container with push-in friction fit hinged lids. Dimensions:  55mm H x 30mm Ø. Withstands temperatures up to 80°C.

Check Valve ( 1211Z01 ) Product Dimensions (l x w x h) : 2.75x0.75x0in Polypropylene, large. Valve prevents the reverse flow of the liquid when the pressure is interrupted.  Useful for any tubing system on vacuum line. Large size valve will fit tubing 12-13-15 mm (7/16 " to…

Translucent, low-density Polyethylene wide mouth bottles with leakproof polypropylene screw closure. Made from FDA approved resin for use with food products. Bottles have greater flexibility and impact resistance than high-density Polyethylene bottles.

Product Dimensions (l x w x h) : 5.437x3.812x8.437in Multi-Channel Pipettor Stand. Made from clear acrylic, this one piece multi-channel pipettor stand accommodates most of the major brands of multi-channel pipettors. Shipping weight is 1.8 lbs. Additional sizes are available upon request.

Dispensing Trays. Heavy trays fabricated with 1/4" thick high density polyethylene. All welded construction. Dispensing trays are supplied with polypropylene dispensing valve located as close to the tray bottom as possible, but can be in other locations upon request. All trays below can be…

Traditional style wash bottles fitted with polypropylene swivel/leak-proof closures. Maximum temperature of LDPE is 80°C. All narrow mouth wash bottles are supplied capped in shrink-wrapped packs of five.

Product Dimensions (l x w x h) : 7.625x1.072x1.349in Sampler/Ladle 10 mL. This sampler-ladle is made from pure polytetrafluoroethylene and is supplied with a fixed 6" (150mm)  handle. Totally inert. 10 mL capacity. Dimensions:  top ID 1" and bottom OD is 3/4".

Product Dimensions (l x w x h) : 13.375x7.5x0.325in Molded of white PVC for easy distinguishing of different  dyes on the slates. For storing of twenty standard  slides 25 x 76 mm (1" x 3"). Designed for easy  removal of slides.

Designed for laboratory carboys or other large containers with spigots Carboy spill trays are fabricated with 1/4" thick chemically resistant HDPE. All welded construction featuring a 1/2” skid resistant top shelf. Provides a safer way to dispense chemicals or other liquids in the…

Product Dimensions (l x w x h) : 0.331x0.304x0.425in Vane Bar PTFE Triangle for use in Vials 3-5ml. Solid PTFE resin vanes with molded magnetic bars in center. Permit rotation in small conical tubes. Ensure thorough sample mixing.

Product Dimensions (l x w x h) : 0x1.569x2.105in Mini funnel. Polypropylene. 1 OZ capacity. Mini-Funnel has numerous lab and industrial applications.

Supplied with PP closure, this 500mL Pump Dispensing Bottle is highly suitable for dispensing liquids and creams. Wide surface area is easily labeled with contents. Pump Dispensing Bottle is suitable for food grade products. Dimensions: 3” diameter x 8.25” height