Autoclavable Chemical resistant Gas impermeable Acceptable sterilization methods: autoclave, dry heat, chemical.

This new generation of Socorex® Bottle Top Dispensers is intended for the safe and reproducible liquid distribution of volumes up to 25, 50 and 100 mL. The Calibrex™ 525 organo includes a ground glass plunger, best suited for organics, non-crystallizing acid and base solutions. The…

Tear-Off, Tear-Out, or Flip Cap

Fitted with rubber liners Borosilicate glass, Wheaton “200” glass Consists of screw neck vials and attached 2386Q20 series cap fitted with rubber liners Packaged in Wheaton Lab File® carton containing two pull-out cardboard drawers. Listings show height x diameter.

1.2, 2.0, 3.0, 4.0 and 5.0 mL volumes Free-standing or round bottom configuration Seven different cap colors, blue, pink, green, yellow, red, white and natural are standard on the 2.0 mL sizes. All vials are batch certified DNase and RNase free, non-pyrogenic and endotoxin free and are…

Screw cap made of radiation grade polypropylene Variety of colors Packaged in case of 100 or 1000

Manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements.

Plastisol coats exterior of bottle retaining contents if bottle is accidentally broken Non-slip coating allows for greater ease and stability when handling wet or dry Made from amber soda-lime glass that conforms to USP Type III requirements Amber bottles protect light-sensitive samples…

Excellent for accessing fluid flow in deep manholes and hard to reach sub-surface sampling areas Helps meet EPA requirements for water and waste water sampling Available in lengths up to 18’ (5.5m) Each sampler consists of an inert polypropylene head with stainless steel fittings and an…

Tested and compared to other containers, Redi-Pak plastic bottles offer many superior advantages Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes The closure design incorporates a unique double-seal which has been leak-tested under stringent…

Clear or amber Teflon®-faced Screw thread cap Teflon®-faced silicone lined open top vials are suitable for use in water sampling according to EPA 40 CFR 136, “Guidelines for Establishing test Procedures for the Analysis of Pollutants.” The open-top screw cap has a specially…

Available with caps attached or no caps Low profile for greater stability Available with rubber lined caps or Teflon faced rubber lined caps Cap material is black phenolic and cap and liners are autoclavable. This sample vial and closure combination provides an extremely inert and…

Manufactured from ultra-clear virgin polypropylene, the WHEATON® Centrifuge Tube range meets the needs of most laboratory users for routine centrifugation applications. Available in sizes 15mL and 50mL, with a leak-free cap and large writing area, they are ideal for a wide range of sample…

The Organic series consists of clear and amber glass vials with solid or open top closures.  The closed-top closures have Teflon® faced 14B white styrene-butadiene rubber liners and the open-top closures have a Teflon faced silicone septa assembled in the cap. The cap material is black…

Flint glass, with slight shoulder Tight fitting, lower-density polyethylene cap with thumb tab can be removed and applied easily with the same hand in which the jar is held. Cases are constructed to store jars neatly, with caps attached, in partitioned trays which can be pulled out as drawers.…

For determination of settleable matter in water and waste water Screw plug cap is virtually leak-resistant and will not snap off in the cone Of clear styrene-acrylonitrile Unit can be easily cleaned through the bottom The new Imhoff cone from Wheaton features a more…

Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes HDPE The closure design incorporates a unique double-seal which has been leak-tested under stringent vacuum and pressure conditions and proven to remain tight over extended periods of time. Comparative tests…

With attached screw caps Ideal for field or general laboratory use

With attached screw cap 30-1000 mL (1 oz-32 oz) sizes Polypropylene caps with choice of liners Clear glass for light sensitive sample Narrow mouth bottles are Type III soda-lime glass and conform to USP Type III requirements. These bottles are ideal for solvent, chemical and sample storage…

Borosilicate glass With precision made interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with…

Tip made of LDPE (Low Density Polyethylene) Extended controlled dropper tip dispenses one drop at a time Average drop size is 44uL

Available in Natural red rubber, gray butyl and Teflon® coated butyl 7, 13 and 20 mm sizes Stoppers come in a variety of elastomer formulations. Natural rubber is a general-purpose elastomer used primarily for aqueous liquid fill products in the 4.0-7.5 pH range. Its resealability is…

Leak-resistant design with double-seal closure No-drip pour lip for safe and clean pouring Cap attached

BOD bottles are suitable for incubating diluted samples of sewage, sewage effluents, polluted waters, and industrial wastes to determine the amount of oxygen required during the stabilization of the decomposable organic matter by aerobic biochemical action. These 300 mL capacity bottles are…

936 Macro Outstanding accuracy and precision Adapters for Pasteur pipettes and straw tips Optional nozzle protection filter Two year warranty The 4.8V Acura electro 936 macropipette line includes a microprocessor-controlled motor and rechargeable battery pack. Three models…

Engineered for arsine analysis using the silver diethyldithiocarbamate (SDDC) colorimetric method Meets ASTM / USP and EPA specifications Arsine absorber (1140L18) has a socket joint Scrubber tube (1140L22) has a standard taper 24/40 Clear-Seal™ joint and a spherical 12/2 ball…

Polypropylene Natural (Autoclavable) Leak resistant design with double-seal closure No-drip pour lip for safe and cleaning pouring Cap attached

ID Viton Tubing

These autoclavable caps are designed to ensure the ultimate in product safety. The liners are white styrene-butadiene faced with Teflon.

Leakproof, double-seal closure Special no-drip pour lip Standard thread finishes The closure design incorporates a unique double-seal which has been leak-tested under stringent vacuum and pressure conditions and proven to remain tight over extended periods of time. Comparative tests performed…

Leak-resistant design with double-seal closure No-drip pour lip for safe and clean pouring Cap attached

BOD Bottle Racks are constructed of coated wire. 1215X63 is holds up to twenty 60 mL BOD Bottles and 1220C96 hold up to twelve 300 mL BOD Bottles. Rubber Leash For BOD Stopper (1234R64) ensures that the stoppers do not become lost when collecting samples in from the field. The 10 mm diameter…