Kimble 28400 With fused-in fritted discs Designed from Federal Specification DD-F-776 Dimensions are identical with corresponding sizes of 5220F28 series. Type designates capacity (in mL) and porosity.

Squibb-type with Standard Taper joint and stopcock Plain stem, but may be used with a 179800 adapter. Note stem diameter for a proper fit when using this adapter Replacement stoppers are 850100 series 636010 series is supplied without a stopper Plug is 801001 Manufactured from 33…

With Standard Taper glass stopcock and Standard Taper glass stopper 60 mm long stem, which drains completely after stopcock is closed

Supplied with a round glass stopper and a PTFE stopcock plug Lower stems have an i.d. that allows for more complete seperation and eliminates the necessity of emptying the funnel

KIMAX® funnel is supplied with a Standard Taper ground glass stopper and a PTFE stopcock Gradually tapering shoulders and a wide neck facilitate cleaning Sharp separations are provided for by a narrow bore in the body just above the stopcock Replacement stopper is 850100 Replacement…

PTFE stopcock Graduated with double white ceramic enamel scale; right side ascends and left side descends Calibrated to contain With replacement stopper Designed from ASTM Specification E1096, Type 1C requirements Manufactured from 33 expansion, low extractable borosilicate glass…

KIMAX funnel constructed with heavy uniform walls and strong, fire polished rims and stems to give a long service life. Funnels have a high resistance to chemical attack, mechanical, and thermal shock. Designed from ASTM Specification E1095, Type I, Class B requirements.

The 90 mm filtration apparatus with stainless steel support is recommended when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate. This unit is also used to produce ultra clean filtrate since the screen will not shed particles into the filtrate …

KIMAX funnel constructed with heavy uniform walls and molded rims and fire polished stems to give a long service life. Funnels have a high resistance to chemical attack and mechanical and thermal shock. The 58° funnel angle is a Kimble exclusive, formed to an exact angle for rapid filtration. The…

The 90 mm filtration apparatus with replaceable fritted glass support is recommended for large volume filtration analysis of corrosive liquids or samples with high particulate loads. The glass support disc can be replaced if it becomes clogged or if sample-to-sample contamination is a…

ValueWare® borosilicate glass 58° long stem addition funnel with heavy uniform walls and strong, molded rims Long stems are fire polished for long service life High resistance to chemical attack, mechanical, and thermal shock Designed from ASTM specification E1095, Type I, Class B requirements

KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and PTFE stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation…

Cylindrical funnel has a PTFE stopcock and a glass hex head stopper 633031 is supplied without a stopper Standard Taper bottom joint is 24/40 with a drip tip Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

KIMAX funnel used wherever filter paper and membranes cannot withstand the chemical attack of the filtrate. With a marking spot Constructed with heavy-walled stems, and top rims are beaded for extra strength Designed from Federal Specification DD-F-776

Cylindrical funnels have a pressure equalizing line, a PTFE stopcock, and a lower drip tip Graduations to the stopcock are numbered both up and down Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

KimCote® plastic-coated funnel is supplied with a standard taper ground glass stopper and a totally autoclavable PTFE stopcock plug. Lower stems have an I.D. large enough so that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation and eliminating the…

Manufactured from KIMAX™ borosilicate glass, ValueWare has a low coefficient of expansion and a very high resistance to chemical attack. This means optimal performance in the lab at an affordable price. Long life expectancy, resistant to most chemicals. Ideal for general laboratory use.…

KIMAX® funnel with a short, wide stem Constructed with a heavy uniform wall and a strong, fire-polished rim and stem to provide a long service life Funnel has a high resistance to chemical attack and mechanical and thermal shock Designed from ASTM Specification E1095, Type IV…

With Teflon ® stopcock plug Standard Taper ground neck has solid plug stopper of high-density polyethylene Designed for Federal Specification NNN-F-800

KIMAX funnel used wherever filter paper and membranes cannot withstand the chemical attack of the filtrate. Funnels are constructed with heavy-walled stems, and top rims are beaded for extra strength. With a marking spot. Designed from Federal Specification DD-F-776.

These separatory funnels prevent the vortexing of liquids during phase separation. The funnels are designed with an internal baffle plate to divert the liquids being separated from vortexing and then remixing The funnels are supplied with PTFE stopcocks and Standard Taper 29/42 center…

KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and polytetrafluoroethylene stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete…

Designed to handle liquids for analysis of particulate or microbiological contamination; funnels are graduated for accuracy Choose the Ultra-Ware microfiltration assembly that best fits your application Fritted Glass Support, 25 mm (4588A01) Used for general filtration.…

KIMAX funnel constructed with heavy uniform walls and strong, molded rims and fire polished stems to give a long service life Funnels have a high resistance to chemical attack and mechanical and thermal shock 58 º funnel angle is a Kimble exclusive, formed to an exact angle for rapid…

This Buchner KIMAX® funnel is used wherever filter paper and membranes cannot withstand the chemical attack of the filtrate. Funnels are constructed with heavy-walled stems, and top rims are beaded for extra strength With a marking spot With KIMFLOW® fritted disc …

Designed to help prevent contamination during use Recommended for routine filtration analysis of corrosive liquids and the removal of particulates from HPLC solvents Replaceable supports available Filter size: 47 mm; 3/8” hose connection A ground joint connection eliminates…

MICROFILTRATION WITH GROUND JOINT The 90 mm filtration assembly with fritted glass support is designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter.  This unit is also recommended for…

The 90 mm filtration assembly with fritted glass support is designed for large volume filtration analysis of corrosive liquids or samples with high particulate loads that would tend to clog a 47 mm diameter filter. This unit is also recommended for filtering large volumes of HPLC solvents. …