Corning, Chemicals
-
-
PC-400D & PC-600D Hot Plates
CorningConserves energy Hot top indicator for safety Two-year warranty Corning® hot plates have a glass-ceramic Pyroceram® top and offer superior performance and reliability in a low profile, space-saving design. Advanced insulation technology conserves energy by keeping heat safely at the top where…
-
These PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action…
-
Modular PYREX Accelerated One-Step extractor-concentrator performs extraction, concentration, and drying with the same apparatus and is designed for use with solvents of heavier specific gravity than sample being extracted. Extraction and concentration can be done in 1/3 of the time.…
-
Condensers have water-jacketed Standard Taper inner joint. Complete with condenser, flask and extraction tube. The low thermal expansion rate means that the PYREX brand extractors can be routinely used in applications requiring protracted heating at temperatures as high as 230°C. The inherent…
-
These PYREX® chromatography columns have a reservoir at top and a Product Standard 2mm bore PTFE (Polytetrafluorethylene) plug stopcock at the bottom. The top opening will accept a #2 rubber stopper.
-
PYREX® Ten Broeck Homogenizer
CorningThese 40mL capacity PYREX® homogenizers are designed for grinding small samples for pathological and biochemical work. The catch basin bulb has a 55mm outer diameter. Made in accordance with Federal Specification DD-T-363a. It may be used manually but is adaptable for use with a slow speed…
-
These PYREX® tissue grinders (homogenizers) are recommended for soft tissues found in the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene…
-
The Corning variable speed LSE Vortex Mixer provides fast, efficient mixing with minimal vibration. The unit features a powerful, counter-balanced motor drive, continuous or "touch" mix modes. A range of accessories are available for all common sample tubes and containers. Features:…
-
Corning® LSE™ Nutating Mixer
CorningThree-dimensional gentle mixer The Corning LSE Nutating Mixer is a compact mixer that combines the motion of an orbital shaker and a platform rocker to produce a continuous three-dimensional agitation. The output demonstrates a thorough yet gentle mix without foaming. This mixer is safe to use…
-
Corning® Videodrop
CorningThe Corning Videodrop utilizes the principles of interferometry in conjunction with microscopy to sense, detect, characterize, and track single nanoparticles in real time. The Videodrop aligns with the Cell and Gene therapy segment of the bioproduction market due to the correlation of collecting…
-
PYREX® Allihn Condensers
CorningAllihn - suitable for use in vacuum distillations With condensing tube expanded by series of bulbs which increase condensing area and lengthen condensate path Inlet and outlet tubes are on opposite sides of the jacket All sizes take stopper size 3 and have Standard Taper drip…
-
LSE™ Digital Vortexers
CorningHeavy duty platform-based vortexer The Corning Digital Vortexer is a multipurpose shaker dedicated to a variety of shaking and mixing applications. Three easily removable and interchangeable platforms accommodate many different sample containers such as flasks, bottles, tube racks, plates,…
-
PC-611 Stirrer
CorningThese Corning® PC-611 stirrers have an 11 x 11 inch plastic (ABS) top and can stir large volumes of liquid with ease. These stirrers are designed for 5 gallon vessels (19L), but can stir up to 10 gallons and can handle many applications that previously required an overhead stirrer. This powerful…
-
Lambda Plus Pipettors have been engineered to provide the highest levels of accuracy, reproducibility, and comfort. Lambda Plus Pipettors feature smooth plunger movement and extremely low pipetting forces. Volume can be set by turning either the thumb wheel or the plunger button, and a locking…
-
Tris Borate EDTA (TBE), 10x
CorningTBE (Tris-Borate-EDTA) has applications in DNA and RNA agarose gel electrophoresis and polyacrylamide gel electrophoresis. TBE has a higher buffering capacity than Tris-Acetate-EDTA (TAE) buffer, but the latter is more suitable for steps involving the action of enzymes on nucleic acids…
-
Condenser 200 mm
CorningThese PYREX® condensers have a high surface area per unit length of the 200mm long jacket with a 19/38 Standard Taper outer joint at the top and a plain drip tip at the bottom. They are primarily used in distillation assemblies Condenser tubulations are approximately 10mm O.D.
-
Fetal Bovine Serum, Low IgG
CorningLow IgG (or "IgG Stripped") Fetal Bovine Serum is useful in IgG antibody production, in the propagation of organisms that are normally hindered by the presence of IgGs, and any project in which downstream results would be hindered by exogenous IgGs. Uses: Commercial antibody…
-
LSE™ Compact Centrifuge
CorningThe Corning® LSE™ Compact Centrifuge is a space saving centrifuge ideal for use in Life Science and Industrial Research labs. Three angle rotors are available (sold separately) for use with the Corning LSE Compact Centrifuge, which can accommodate tube sizes of 15mL, 50mL, and 1.5/2.0mL…
-
This is an optional rotor for 6 x 15 mL, 2 x 50 mL and 2 x 15 mL combination, for use with Corning® LSE™ Compact Centrifuge. Features: Maximum Speed: 6,000 rpm/4,387x g Equal G force for all configurations Accepts both conical and round bottom tubes (not compatible…
-
0.5M EDTA
CorningEDTA (ethylenediaminetetraacetic acid) is a polyamino carboxylic acid. It is a colorless, water-soluble solid and is useful as a chelating agent due to its ability to "sequester" metal ions such as Ca2+ and Fe3+. These cations are responsible for various undesirable…
-
This 10.5L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 10,500mL. For replacement cover, see No. 3081-250CO. For lower part only, see No. 3081-250LO. Warning: Not for vacuum applications. Do not heat…
-
This Air Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.
-
Single Block, 24 x 0.5 ml tubes
CorningThis is a single block, 24 x 0.5 mL tubes, for use with Corning® LSE™ Digital Dry Bath.
-
Corning® Lambda™ EliteTouch™ pipettors have been engineered to provide the highest levels of ergonomics, accuracy, and precision. Lightweight construction, contoured shape of the handle, and 4-digit counter were designed to ensure comfortable pipetting. All pipettors feature smooth…
-
Complete Certificate of Analysis available for each production lot - Produced under the highest industry standards to ensure superior results - This is a competitively priced, high quality serum Fetal Bovine Serum (FBS) is the most common supplement used in cell culture. Its…
-
Corning offers a stainless steel, two piece, 18" (45.7cm) support rod with a 5/16" (0.8cm) diameter that consists of two 9" rods that screw together. It screws into the base of Corning hot plate and stirrer models PC-400/410/420, PC-400D/410D/420D and PC-600D/610D/620D.
-
Lambda™ EliteTouch™ Starter Kit
CorningCorning Lambda EliteTouch Starter Kit contains 4 variable volume pipettors in the most popular and universal volumes (0.5-10 µL, 2-20 µL, 20-200 µL, and 100-1000 µL), pipet stand for 4 pipettors, 3 racks with tips, and accessories. Cat. No. 6051 Lambda EliteTouch…
-
PYREX® Liebig Condensers
CorningSuitable for the use in vacuum distillations With Standard Taper drip tip joint at bottom and Standard Taper outer joint at top The 8” condenser has Standard Taper 19/38 joints; others have 24/40 joints
-
Corning LSE Mini Incubator
CorningCorning LSE Mini Incubator 115V comes with a shelf and has a port to insert a thermometer to track change in temperature
-
Corning Transport Medium is formulated using the final ingredient concentrations outlined in CDC's SOP#: DSR-052-01 “Preparation of Viral Transport Medium”. Transport Medium is an isotonic solution at neutral pH containing protective proteins, antibiotic to prevent microbial…
-
AxyPrep™ Mag Plasmid Kit
CorningThe AxyPrep Mag Plasmid purification kit utilizes a magnetic bead technology for high-throughput purification of plasmid DNA from E.coli cells. AxyPrep Mag Plasmid kit can also be used with fosmid and BAC vector-based constructs ranging from 5kb to 150kb. The system consists of steps of pelleting…