Adapter allows standard single neck round bottom flasks to be used as storage vessels. Sampling can be accomplished by removing 0-4mm Chem-Vac™ Chem-Cap® plug while maintaining inert gas purge thru sidearm. Available with a choice of 14/20 or 24/40 standard taper inner joint.

Cover slips are manufactured from the highest quality borosilicate hydrolytic class 1 German glass. They have excellent resistance to chemicals and are ideal for neural tissue culture and hard-to-attach cells. These cover slips are exceptional for florescence and confocal microscopy. Sold in…

Round bottom single neck flask having a standard taper outer joint. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.

100L Squatty, Low Profile, glass reactor system with 400mm flange. 100L glass reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Squatty Reactor System Features: More…

13.5 Rubber Stopper Similar to CG-3026 except with one hole. These stoppers are suitable for practically all general laboratory uses. Composition ensures resiliency and pliability over a long period and withstands laboratory conditions without hardening. The dimensions are in accordance with…

Isostatically molded in pure, FDA approved, PTFE. Guaranteed chemically resistant and inert. Heavy wall construction. Suitable for IPA Method 1311 TCLP

NORELL™ Standard Series™ NMR Tubes are manufactured out of ASTM Type 1 Class B glass, commonly referred to as N-51A. Applications that are suited for using this type of glass are routine NMR, where samples are run under room temperatures with no thermal gradients, for auto-sampling…

Used for microscale recrystallizing of small quantities of reaction product. Consists of a glass outer tube with a non-uniform grind to purposely allow leakage, and a PTFE inner plug. The PTFE inner plug fits both the 1.0ml and 2.0ml capacity outer tubes. Capacity listed is the volume of the tube…

Three twist-off seals permit easy conversion from a solid to a one, two, or three-hole stopper. Soft, resilient, natural rubber demonstrates exceptional aging characteristics and withstands repeated autoclaving. Autoclavable at 250°F for 30 minutes under water or steam conditions only (not…

PTFE molded clamps with a steel core can withstand temperatures up to 250° C and are totally chemically resistant and inert.

Beaded pipe to sanitary fitting adapter connects to the 1" beaded pipe side arm of CG-1968-Q zero dead space drain valve. Approximate overall length of adapter is 2 " (52mm). NOTE: Requires a CG-1968-66 beaded coupling.

Similar to AF-0522, but cylindrical in shape. The 25 and 50mL sizes have a 0-4mm Chem-Vac™ Chem-Cap® valve while the 100 and 350mL sizes have a 0-8mm valve size. PLEASE NOTE: STIR BARS LARGER IN DIAMETER THAN THE OPENING OF THE VALVE, OR STANDARD TAPER JOINT, CAN BE SEALED INTO VESSELS…

NORELL™ Screw Cap NMR Tubes have a convenient screw cap access with the security of a PTFE® seal. Supplied with open top cap & PTFE® septum for quick and clean access with a 22 gauge standard point needle.

Cylindrical style addition funnel with a threaded, grease-free extended tip valve. Design of all PTFE plug permits semi-needle valve action. With a standard taper top outer joint and lower inner joint, both being the same size, and pressure equalizing arm. Funnels with 14/20 and 19/22 joints are…

Neoprene filter adapters are designed to fit between a filtering funnel and a flask. For use with Buchner funnels, Gooch crucibles, filter tubes, etc. Can be used individually or nested with adjacent sizes. Eliminates the boring of rubber stoppers and the difficulties of inserting and removing…

Features: Oversized Rugged 1" S.S. Pipe (1.315" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability.  All S.S. Uprights are Passivated to Inhibit Corrosion.  Improved Support Clamp Auto-Centers Reactor and Lid,…

For storage applications, these vials are packaged in a SBS coated white tray complete with SBS partition. Boxes are marked with alpha-numeric coordinates for fast and easy vial identification. Caps are supplied installed on the vials and all sizes have the TFE lined silicone SURE-LINK septa.…

With standard taper inner joints at both ends.

Scoop is designed with one pointed end and one blunt end. Design allows for digging out and handling of small amounts of material. Spatula is 6.5" OAL.

DROPPER BOTTLE, NATURAL, 3ML 3 mL (0.1 oz.) LDPE plastic bottle Purchase components separately

The 11mm anodized aluminum seals are manufactured to fit all 11mm crimp top vials and are available in a variety of colors. The seal with the viton® septa is resistant to many aggressive solvents. The 11mm magnetic seal can be used with any instrument where the vials is transported with…

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center and side necks. Indentations increase agitation of the contents of the flask during stirring. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum.

PTFE powder funnel is totally chemically inert with super smooth non-stick internal finish.

Manufactured from Type 1 Class A borosilicate glass with FOUR deep side baffles for optimum agitation during trypsinization. Flask comes with beaded, break-resistant lips and 50mm OD necks. Sold 1 per case.

A 3-way adapter for the connection of 3 vessels with two top outer joints and a lower inner joint, all being the same size.

Flexible and compact, this 4-port line is constructed using CG-474-02, 4mm double oblique hollow high vacuum greased stopcocks on all four ports. Ports are fitted with two 14/20 inner joints and two 24/40 inner joints and are spaced 5" center to center. This configuration permits use directly…

Adapter is designed for use with flasks or reaction vessel lids that have a 10 or 20° angled side neck. Adapter has a lower inner joint and two top outer joints. Lower stopcock is either a 6mm or a 10mm PTFE stopcock with a 1/2” or 3/4” OD distillate takeoff for use with a…

One of the most thermally stable elastomeric materials available, Perfluoro is a family of perfluoroelastomer compounds designed to provide superior chemical resistance, and they offer a cost savings over similar o-rings such as Kalrez® 4079 and Chemraz®. Perfluoro o-rings are stocked in…

BOTTLES, MEDIA, WITH SIPHON ASSEMBLY, Standard media bottle with siphon assembly consisting of stainless steel siphon pipe and silicone tubing cut to length. All stainless parts are manufactured from 316L stainless steel electropolished to a 20Ra or better finish. The silicone tubing is peroxide…

Bonded closures feature clear PTFE/Silicone liner bonded directly to the closure without the use of glue or adhesives. These bonded closures provide a cost effective, integrated, one-piece system that eliminates costly line fallout. Closures are available in both pre-slit and non-slit designs.

TUBES, CENTRIFUGE, 50ML, Centrifuge tube with a short, conical bottom and 24-415 GPI threaded top. Fits I.E.C. shield number 320. Supplied complete with a Poly-Seal® polypropylene lined phenolic screw cap. TEST TUBE TONGS, Tongs are made of zinc coated steel, 6" overall length. Spring…

Vigreux style column with indentations that run the entire length of the column for improved vapor-liquid contact. Column length refers to the effective length, measured from the lowest to highest indent in the column. Column has a top outer and lower inner standard taper joint.