ELISA 8-well strip plates are available in flat bottom (F) and round (U) bottom. Strips are gamma-irradiated and tissue-culture treated for cellular attachement and growth. The strips are held securely in place by frames that are constructed of a specially formulated thermoplastic for dimensional…

CryoSure® brand vials are recommended for storing cell cultures, blood/serum specimens, sperm, and other biological specimens at vapor phase* liquid nitrogen temperatures (-320°F/-195°C).    By using external threads, all CryoSure® vials are designed to be less…

One-piece transfer pipets eliminate the preparation and risks of using glass Pasteur pipets. The polyethylene material is shatter-proof, inert, and has a low-affinity surface to minimize sample loss due to binding. Sterile versions are individually packed.

These tube storage boxes are made of durable polypropylene.  Each box consists of three components: a heavy-duty brightly colored deck, a transparent top, and a transparent bottom locked to the deck component.  The transparency of the top and bottom allows for easy viewing of…

Caplugs Evergreen's test tubes are ideal for a variety of general laboratory applications, offering more sizes than any other manufacturer.  Tubes are bulk packed, non-sterile, without caps.  Polystyrene tubes provide clarity and are appropriate for use with mild acidic…

Extraction columns are for use in drug extractions, HPLC sample preparation, general chromatography applications and other research procedures and may also be used “piggybacked”. Include a medium (45-90 μm) polyethylene filter matrix support. Large reservoirs and cartridge…

Slide-Fix™ Slide Jars Prefilled are used in a variety of applications including preservation and transport of Pap smear slides, post-surgical tissues, and fine needle aspiration biopsies.  Slide-Fix™ Slide Jars Prefilled contain about 25 mL of 95% ethyl alcohol for the…

Polyethylene test tube stopper caps are precision-molded and available in either our standard or flat-top style.  Stopper caps are available for every size of Caplugs Evergreen test tube from 8 mm to 17 mm.  Standard version is available in a wide variety of colors and flat-top…

30 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 30 mL tube with spork is also widely used in parasitology specimen transport.  …

Slide-Sette Saver™ is designed for shipping the same patient pathology microscope slide and tissue/biopsy paraffin block in a single container. In addition to its utility in shipping pathology specimens, the Slide-Sette Saver™ can be used to store specimens on a long-term basis. …

Serum sample cups feature a low-profile flange or standard flange and are available in clear polystyrene and opaque polypropylene. Designed for short serum samples.

Overfitting caps for use with sterile culture tubes have two positions: loose for aerobic culturing and tight for anaerobic cultureing and leakproof sealing.  Designed to fit specified tube material and size, listed in description.  Available in non-sterile or sterile.

Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format.  One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes.  Autoclavable racks are alpha-numerically…

Moisture chambers keep slides well isolated and maintain moisture levels for immunostaining and diagnostic reaction processes. All units are separated into ten individual compartments with space between each compartment. The closed lid ensures complete isolation by placing eight barrier…

Designed for storing biological fluids and pathology specimens, these containers are also useful for almost any miscellaneous storage needs, such as at laboratory or nursing stations.  Containers are non-sterile.  All containers are precision-molded from either high-density…

These serum sample cups feature a flange, freestanding round bottom, and are designed to fit Roche® Analyzers. The cups have a capacity of 0.5 mL and are used in the analysis of a wide variety of samples.   

30 & 50 mL centrifuge tube racks that hold up to twenty tubes in alpha-numerically labeled holes.  Freestanding centrifuge tubes lock into place for one-handed processing.  Available for 30 & 50 mL centrifuge tubes and 15 mL centrifuge tubes.

For use in BBL® Fibrometer. Uniform wall thickness. Constant heat transfer to samples helps assure accurate prothrombin time and coagulation measurements. Precision-molded polyethylene with a convenient write-on tab for identification.

MST™ micro screwcap cryogenic tubes are recommended for storing blood/serum samples, cell cultures, sperm and other biological specimens at liquid nitrogen temperatures (-320°F/-195°C).  These tubes feature a built-in flange at the neck of the tube to further reduce the…

Reaction tubes and strips for use with PCR applications feature a thin-wall design that allows for optimum heat transfer. Reaction strips include eight integral thin-wall reaction tubes that are specially designed for more even well-to-well heat transfer and faster cycle times. Reaction…

Sterile test tubes with overfitting two-position caps are ideal for cell culturing and other applications that require a sterile surface. Overfitting caps have inner ribs for two-position fits: loose for aerobic culturing and tight for anaerobic culturing and sealing. Molded in tabs allow for…

48-well deep well plates are suitable for storage and dilution and have distinct alpha-numeric designations.  Each well bottom has a 5 mL volume and rounded corners and chamfered edges to eliminate dead space during mixing.  Plates have distinct alpha-numeric well designations…

Columns are for use in general chromatographic work for the extraction of components, with special applications in isoenzyme and protein studies, hemoglobin fractionation, and desalting. Chromatography columns are precision-molded in 5-in and 7-in sizes from premium-grade, chemically inert…

Patented FPC® Fecal Parasite Concentrator isolates helminth eggs and larvae, protozoan cysts, coccidian oocysts, and microsporidian spores. The easy-to-use system provides clean sediment for microscopic examination and requires minimal processing time. The concentrator system is…

Round Glass Cuvettes are designed to fit with Abbott TDx. Made from borosilicate glass. 12 mm x 50 mm dimensions

30 mL centrifuge tubes are ideal for general purpose laboratory work.  These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 30 mL tube with spork is also widely used in parasitology specimen transport.  …

These sturdy plastic storage library units hold approximately 250 embedding rings, 400 processing/embedding cassettes, or combinations of both, or other commonly used rings and cassettes even our Jumbo tissue cassettes. They are constructed of high impact polystyrene for strength and flatness.…

Precision-molded of polystyrene, the 95-pin inoculator can simultaneously pick up 95 bacterial colony samples and transfer them into or from a 96-well format microplate or inoculum tray. The missing pin in the inoculator assembly serves as a blank control. Other applications include…

Screw lid specimen container lids are designed for use with containers used in storing and transporting biological fluids and pathology specimens.  Containers are highly resistant to most chemicals, including formaldehyde, most bases, and weak acids.  Containers can also…

Provide accurate cell and particle counts. Polystyrene construction, writing area, and optically clear. Dilution vials are made to provide accurate, hemolysis- and distortion-free cell and particle counts. The one-piece polystyrene design includes rounded seams, a frosted writing…

These dual purpose slide storage/mailing boxes are made of a styrenic thermoplastic material for flatness and durability. They are easy to open and close. The lid has a frosted area for marking and the floor of the box has a molded centerline numerical ID with the rest of the floor lined…

Nominal capacity of 5 ml, tubes are designed to fit AU-5000 and fit into most racks for high volume analyzers. In addition to being used as a serum tube, it can also be used as a transport vial and a storage vial.