Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner. close-it has been…

For 6 bottles up to max. 95 mm Ø. PP Suitable for food

Pump-it® canister pumps are designed for quickly and cleanly emptying canisters and small barrels up to 60 l. The hand pump is used to create excess pressure that forces the liquid out of the canister. Pump-it® is suitable for weak acids, alkalis and petrochemicals. Medium-contacting…

Spray bottles with pump vapouriser and safety cap for the pump. Liquids can be finely vapourised at the push of a button in an environmentally compatible way. The transparent bottles make identification of contents easy. The protective cover prevents unintentional pressing of the pump and acts as a…

Dipping bottle with glass container for sampling in sewage plants, for mud and water samples. For testing crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants of Hazard Categories IIA and IIB. Completely made from non-spark producing…

Three-way valves made of solid PTFE with hose nozzles. Resistant to chemicals. Very easy connection thanks to its excellent antifriction properties. Blue handles made of PP. Resistant to compression max. 1 bar Vacuum suitable up to 10 -1 mmHg Autoclavable

Packaging bucket for transport, packaging and storing of various materials. Suitable for the food or building material industries and non-aggressive chemicals in environmental protection, hospitals and the household. With strong handle. Quality closure on the bucket for product safety. PP,…

The SteriPlast® Bio sample spoon made of green PE is produced in our clean room of class 7 (10,000), individually wrapped in bio-PE film for disposable use and then sterilised by gamma rays. Green PE bio-plastic has all the suitable properties of conventional polyethylene but is…

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net) are attached to the telescopic rod by a practical snap-in joint. Ideal for sampling from baths,…

Frame for pipettes with two rotating perforated plates and drip pan. The holders are suitable for up to 40 pipettes of different sizes, for all measuring and full pipettes up to a max. diameter of 18 mm. A drip pan protects the tips of the pipettes and collects liquid as it drips off. The…

Bottle with drop dispenser and separate screw cap. Cut off dropper tip before first use Reclosable Precise drop dosing

Sampler for all-layer samples of viscous, paste-like, semi-liquid substances, according to DIN 51750 pt. 3 and DIN EN ISO 15528. Different layers remain intact particularly with paste-like substances. Stainless steel AISI 316L (1.4404) 32 mm Ø Optimised opening mechanism (can be…

The long handle of the sample scoop makes it possible to take samples even from places that are difficult to reach, for example large containers with very little content. The high rim prevents the sample from spilling after it is taken. The light design of the stainless steel scoop ensures…

Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with…

Solvent pump foot operated for filling off high purity liquids such as solvents. Pouring flammable liquids All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE. The Bürkle anti-static set can be used to ground the pump for dispensing flammable liquids so…

The micro spatula can be used for reliably measuring, sampling or processing small amounts of powder, chemicals, pastes, creams or active ingredients. The laboratory scoop is made of stainless steel and is manufactured entirely without edges, crevices or undercuts. This excludes the possibility of…

The telescopic immersion tube adapts itself to the container height on insertion of the foot pump. This ensures good removal of residual liquid and means that the foot pump can be used with different containers. Simple handling: Both hands remain free for filling Very good pump capacity…

Barrel tap for petrochemical liquids, closed independently when not used (increased safety), thread connection 3/4" on the outside. Seals NBR Self-closing NW 10 mm

The titrating burette with splinter protection is a fast acting burette with Schellbach stripes based on Dr. Schilling's design with automatic zero point extraction and Bürkle dosing armature.The glass burette has a plastic sheathing which increases resistance to breaking and protects…

Similar to a pallet or dispensing chemist's spatula, this palette knife spatula is suitable for applying or distributing viscous media such as pastes and creams, or for spreading them smoothly. The high-quality stainless steel spatula is manufactured entirely from one piece, with no edges or…

Burkle TargetDispo is a disposable zone samplers for taking samples from multiple layers of the sample material (25mm diameter) These single-use DispoSamplers are available in packs of 20 each. They are used to take target point samples, all-layer and cross-sectional samples of liquids,…

Commercially available spigots made of the materials polyethylene or polypropylene cannot be used for solvents. The spigot StopCock PA is made of electrically conductive polyamide and therefore perfectly suitable for solvents. StopCock PA fits onto 3/4" outer threads and with the…

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with…

The SteriPlast® sample scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop), individually wrapped for disposable use and then sterilised by gamma rays. The sample scoop is ideal for powders, granulates and pastes. The…

Zone sampler Spiralus guarantees precise zone sampling through all layers of the sample. The spiral arrangement of the sampling slits means that these are opened one after the other from bottom to top. In this way the lowest opening is filled first and then those above it in sequence until the…

The spoon spatula is a double spatula with a 0.5 ml spoon and a 17 mm spatula blade. The spoon spatula has many different uses in labs – as a sampling spoon, for measuring or transferring small amounts, as a scraper or for mixing and stirring. Specially designed for disposable use,…

Cylindrical four-way hose connector to connect hoses. PVDF , Temperature resistant up to +160°C max., highly resistant to chemicals PP , Temperature resistant up to +135°C max. Sterilisable

The drill head for carcass sampling has a hexagonal socket for bit holders or chucks, suitable for all commonly used cordless screwdrivers or drilling machines. Meat sampler for microbiological sampling of carcass surfaces. Slaughtering businesses (slaughterhouses, butcher's shops, etc.) are…

For sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Diameter only 32 mm. Dipping containers are used in various areas to collect liquids for sampling. Bürkle produces the most comprehensive collection of…

The LaboPlast® disposable spoon made of polystyrene is produced in our clean room of class 7 (10,000) and individually wrapped for disposable use. The spoon is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and is ideal for sampling powders,…

Sampling tube manufactured in a clean room specially designed for disposable use. Due to the blue colour, it is also perfect for use in the food, animal feed and pharmaceutical industries. The scaled sample container can be used for an exact measurement and it shows contents up to 50 ml or 1.5 oz.…

When the safe-it security seal has been broken, a silver checkerboard pattern appears on both the subsurface and surface of the sticker itself. The safety label safe-it is used as originality seal and as protection from manipulations of e.g. samples, retention samples, for transporting samples,…