Replacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For X-Lens of Agilent 7700X/E, 7800, 7850 & 8800 ICP-MS This product is only available to U.S. Domestic…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

ICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…

The ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies octopole reaction system cell assembly is suitable for use with Agilent 7700, 7800, 7850, 7900, 8800 ICP-MS. Application: For Agilent 7700, 7800, 7850, 7900, 8800 ICP-MS. Replacement Octopole Reaction System (ORS) Cell Assembly This product is only available to U.S.…

Replacement Argon humidifier, two gas lines, for Agilent ICP-MS. Includes bottle, cap and membrane tube. Tubing kit (G8400-60710) and bracket for attachment to ICP-MS not included. Humidifies nebulizer gas when analyzing high total dissolved solids (TDS) solutions, to reduce salt build-up in the…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies octopole assembly without #100 or #200 axial accelerator is compatible with Agilent 8900 ICP-MS and 8900 standard x-lens models for routine applications. Application: For Agilent 8900 ICP-MS. For 8900 Standard X-Lens Model For Routine Applications, G3665A without #100 or…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies nut allows to lock all standard nebulizers with 6 mm O.D shaft. It is used for nebulizer connection at Scott spray chamber end cap for Agilent ICP-MS. Application: For Nebulizer Connection at Scott Spray Chamber End Cap For Agilent ICP-MS. Allows Locking of all Standard…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Tubing and filter for Argon supply to instrument, for Agilent ICP-MS with s-lens for semiconductor analysis. Includes PTFE tubing (5 m) with fittings and connector (p/n 5063-9132), high purity Argon Gas filter (p/n 5064-8092). Suitable for 7700. Application: For Argon Supply to Instrument, for…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Ion extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies octopole reaction system cell entrance lens is suitable for use with Agilent 7700 and 8800 ICP-MS models. Application: For ICP-MS, Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

The Agilent Technologies natural male to barb fitting with 1/4 - 28UNF - ID3.2 connection is made of PEEK material which offers excellent mechanical strength. It suits integrated sample introduction system (ISIS3) used with Agilent 7800, 7850, 7900 and 8900 ICP-MS models. Application: For ISIS3…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

PerkinElmer ICP-MS Coolant fluid, for ELAN 9000/6xX00/DRC/NexION, 1 L. Application: For Elan 9000/6Xx00/DRC/NexION, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Many types of autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 and ASX 500 series used with earlier model instruments. Standard carbon fiber sample…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

ICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…