Agilent Technologies, ICP-MS Supplies
-
Extraction-Omega Lens Assembly
Agilent TechnologiesReplacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For X-Lens of Agilent 7700X/E, 7800, 7850 & 8800 ICP-MS This product is only available to U.S. Domestic…
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Skimmer Cone
Agilent TechnologiesICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…
-
ICP-MS Sampler Cone
Agilent TechnologiesThe ICP-MS sampler cone forms part of the interface region, sampling ions from the atmospheric plasma and transitioning them into the high vacuum MS for detection. High-quality sample cones are key to the sensitivity and stability of an ICP-MS. Agilent Sampler cones, with a nickel or platinum tip,…
-
Screw and spacer kit for s-lens, ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
ORS Cell Assembly
Agilent TechnologiesThe Agilent Technologies octopole reaction system cell assembly is suitable for use with Agilent 7700, 7800, 7850, 7900, 8800 ICP-MS. Application: For Agilent 7700, 7800, 7850, 7900, 8800 ICP-MS. Replacement Octopole Reaction System (ORS) Cell Assembly This product is only available to U.S.…
-
Replacement Argon Humidifier
Agilent TechnologiesReplacement Argon humidifier, two gas lines, for Agilent ICP-MS. Includes bottle, cap and membrane tube. Tubing kit (G8400-60710) and bracket for attachment to ICP-MS not included. Humidifies nebulizer gas when analyzing high total dissolved solids (TDS) solutions, to reduce salt build-up in the…
-
G1091A option - Add Pt skimmer Ni base, 8900 with s-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
8900 Ion Lenses Octopole Assembly
Agilent TechnologiesThe Agilent Technologies octopole assembly without #100 or #200 axial accelerator is compatible with Agilent 8900 ICP-MS and 8900 standard x-lens models for routine applications. Application: For Agilent 8900 ICP-MS. For 8900 Standard X-Lens Model For Routine Applications, G3665A without #100 or…
-
Tubing adapter for peri pump tubing 2/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
End Cap Nut
Agilent TechnologiesThe Agilent Technologies nut allows to lock all standard nebulizers with 6 mm O.D shaft. It is used for nebulizer connection at Scott spray chamber end cap for Agilent ICP-MS. Application: For Nebulizer Connection at Scott Spray Chamber End Cap For Agilent ICP-MS. Allows Locking of all Standard…
-
Stainless steel pipe, 1/16 in GC-ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing & Filter Kit
Agilent TechnologiesTubing and filter for Argon supply to instrument, for Agilent ICP-MS with s-lens for semiconductor analysis. Includes PTFE tubing (5 m) with fittings and connector (p/n 5063-9132), high purity Argon Gas filter (p/n 5064-8092). Suitable for 7700. Application: For Argon Supply to Instrument, for…
-
Skimmer base, brass, for 8900 w/x-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Screw + spacer kit, 7900 ICP-MS w/x-lens
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Skimmer base, brass, for x-lens, ICP-MS
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Integrated Sample Introduction System 3 Flangeless Fitting
Agilent TechnologiesThe ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…
-
Interface wrench, skimmer cone removal
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Ion Extraction Lens 1
Agilent TechnologiesIon extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…
-
Integrated Autosampler (I-AS) Manl (JP)
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Tubing for Gas Line,PTFE,3.0mm ID,5m
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Octopole Reaction System Cell Entrance Lens
Agilent TechnologiesThe Agilent Technologies octopole reaction system cell entrance lens is suitable for use with Agilent 7700 and 8800 ICP-MS models. Application: For ICP-MS, Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in…
-
ISIS3 Male to Barb Fitting
Agilent TechnologiesThe Agilent Technologies natural male to barb fitting with 1/4 - 28UNF - ID3.2 connection is made of PEEK material which offers excellent mechanical strength. It suits integrated sample introduction system (ISIS3) used with Agilent 7800, 7850, 7900 and 8900 ICP-MS models. Application: For ISIS3…
-
ISIS 3-way valve assembly kit,1/pk
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Chiller Coolant Mix
Agilent TechnologiesPerkinElmer ICP-MS Coolant fluid, for ELAN 9000/6xX00/DRC/NexION, 1 L. Application: For Elan 9000/6Xx00/DRC/NexION, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Integrated Sample Introduction System 3 Flangeless Fitting
Agilent TechnologiesThe ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…
-
Tubing
Agilent TechnologiesAgilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…
-
Sample Probe
Agilent TechnologiesMany types of autosamplers have been used with Agilent AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Agilent SPS 4 used with current instruments, and the SPS 3 and ASX 500 series used with earlier model instruments. Standard carbon fiber sample…
-
PFA sample tubing 2.18mm id 1/8 in od,5m
Agilent TechnologiesAgilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.
-
Skimmer Cone
Agilent TechnologiesICP-MS skimmer cones form part of the interface region between the atmospheric Argon plasma and the high vacuum quadrupole MS. Skimmer cones have an orifice or aperture at their tip to transmit the analyte ions to the high vacuum MS. Agilent skimmer cones with nickel or platinum tip have a…
-
Integrated Sample Introduction System 3 Flangeless Fitting
Agilent TechnologiesThe ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…