Gamma-irradiated to ensure sterility 250-piece multipack configuration 10 peel packs of 25 each Available in both 5 3/4” and 9” lengths Choice of cotton plugged or unplugged Constricted top (for cotton plugging) Easy-to-open, sterile packaging peels back at the corner

For dropping pipets, medicine droppers, etc. Fit pipets with 6-8 mm OD, 1/4” Beige color 1 mL bulb is 9/16” diameter x 1 1/2” long (14 x 37 mm); 2 mL bulb is 5/8” diameter x 1 3/4” long (18 x 45 mm)

Transfer (Volumetric) pipettes are manufactured from specially selected, heavy wall machine drawn borosilicate accurate bore glass tubing. They have precision fored jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain; both are resistant…

Decrease cross contamination risks using disposable pipets Metric graduations on transfer pipets Transfer pipets are packaged in peelable bags Product traceability on each bag Sterile

Perform precise dispensing of volumes from 20 to 400uL by using Thermo Scientific™ Samco™ Exact Volume Transfer Pipettes. Samco transfer pipettes are made of shatterproof, nontoxic polyethylene. Their low-affinity surface reduces loss of cells and valuable proteins due to binding. They…

Volumetric pipets are ideal for measuring accurate volumes of liquids. Letters "TD" on the pipet indicate to deliver Sizes 1mL and larger are marked with large numerals on the bulb, indicating capacity Color-coded (ASTM E1273) for ease in sorting and selecting the…

Ideally suited for the rapid transfer of liquids Length: 153 mm Working volume: 2.5mL With graduation

For safer, better contol of pipets up to 200 mL For use with glass or plastic serological or volumetric pipets Accommodates pipets from 0.1 to 200 mL Integrated hydrophobic filter helps prevent over aspiration Fits the hand for comfort and easy control Constructed of…

Glass ungraduated Approximately 4 mL capacity Pasteur-type pipets for one time use in the transfer of small volumes. These pipets do not feature a constriction. Useful in automatic clinical analyzer techniques. Packaged in dispenser boxes containing 100 pipets and one 4 mL rubber bulb.

Midi Plus™ is a lightweight cordless pipetting controller, which allows aspiration from bottles and tubes without the arm and hand elevations required with serological or volumetric pipettes. It fits all commonly used glass or plastic pipettes, but can also be used with Sartorius 5 ml and 10…

Longer lightweight handle reduces arm strain Efficient pump for extended operation Three speed settings for precise control The Portable Pipet-Aid XL has a longer handle to reduce arm strain during pipetting. Its ergonomic design includes an adjustable sliding hand rest and a…

Saves time and eliminates mouth pipetting Tapered silicone seal provides airtight fit in all pipet sizes Excellent aspirator for use with Westergren or Wintrobe sedimentation tubes. Comes complete with an elastic cord for dedicating pipettor to a specific reagent bottle.

This bulb-type safety pipette filler is designed for efficient one-hand operation. Made from natural rubber for better memory and resistance to chemical attack. Its three glass valves control the evacuation of air, liquid uptake and liquid dispensing. Expel air from the bulb by squeezing the…

These PYREX® VISTA™ volumetric pipets are manufactured to Class A capacity tolerances as indicated by ASTM E-969.

EZ Grip Nosepiece TC Gasket Rubber Inserts

Argos Technologies Transfer Pipets are manufactured from a custom grade low-density polyethylene (LDPE), making them the perfect substitute for breakable glass pipettes. These single unit pipets are disposable, therefore eliminating the risk of cross contamination without compromising the quality…

CELLTREAT Plasteur® Plastic Pasteur Pipets offer the aspirating precision of a glass pipet and the safety benefits of plastic. Plasteur Pipets are available in two sizes: 5.75 and 9" for easier handling and longer reach for working with larger vessels. Available in medical grade…

Econo-Pak Economy priced Plain or cotton-plugged Ungraduated with long capillary tips approximately 1 mm id Body of pipet is approximately 7 to 7.5 mm outside diameter with small constriction approximately 30 mm from the upper end to retain a cotton plug. Tip length of all 5…

Motoric pipette filler for measuring, volumetric and Pasteur pipettes, from 0.1mL to 200mL Additional safety for special surroundings - pipetus® standard provides the best prerequisites for working in potentially explosive environments, with toxic reagents or in clean room technology…

Made of 302 stainless steel Typical load, 200 pipets, 7 mm o.d.; dries in approximately 1 1/2 to 2 hours Operating temperature at center of chamber is approximately 110°C Efficient drying is accomplished by chimney convection from a 275W heater in base, promoted by peripherally…

Calibrated To Contain (TC) and To Deliver (TD) to Class A tolerances TC feature accommodates use with viscous liquids Color coded Unserialized Designed and manufactured to ASTM E969 requirements Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438,…

Our PVC deluxe vacuum pressure bulb is ideal for gas aspirating duties. Length: 111mm without valves; diameter 57mm.

Designed for the quick filling and releasing of liquid in aspirating and serological pipettes. Easy to use. Simply rotate the thumb wheel to aspirate or dispense accurate measurements. Press the release lever to quickly dispense all liquid from the pipettes. Material: Polypropylene (PP) …

One-piece transfer pipets eliminate the preparation and risks of using glass Pasteur pipets. The polyethylene material is shatter-proof, inert, and has a low-affinity surface to minimize sample loss due to binding. Sterile versions are individually packed.

Low-affinity surface Attached bulb avoids cross-contamination One-step biohazard disposal Shatterproof, low-density polyethylene which is non-toxic and inert Can be frozen in liquid nitrogen

These PYREX® volumetric pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-969. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Color-coded markings enameled onto the glass. …

Transfer (Volumetric) pipettes are manufactured from specially selected, heavy wall machine drawn borosilicate accurate bore glass tubing. They have precision fored jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain; both are resistant…

Repeat Valve with Kit Adapts 7691K20 for continuous pipetting operations Valve has Luer slip fitting at dispensing tip; side arm takes 2 mm bore tubing for connection to suitable reservoir Valve diaphragm is ethylene polypropylene rubber Kit includes 7691L60 Valve; stainless…

Available in borosilicate or soda-lime glass PYREX® Pasteur Pipets are made from heat-resistant borosilicate Code 7800 glass Corning Pasteur Pipets are mode from economical soda-lime glass One-time use eliminates the danger of cross-contamination of valuable specimens or…

Manual operated pipette filler for measuring, volumetric and Pasteur pipettes, from 0.5mL to 25mL Simple, reliable, exact - pipetus® junior is distinguished as a manual pipette filler by the superior quality of its details and ergonomic shape. In contrast to other manual techniques,…

For use with Pasteur pipettes, small pipettes and medicine droppers.

Polyethylene pipettes will not shatter or break An excellent alternative to Pasteur pipettes and rubber bulbs Evenly distributed thickness ensures uniform suction force Gamma radiation sterilized option available Available wrapped individually (sterile) or in bulk package (non-sterile)