Cannabis, Flasks, Supplies
-
Erlenmeyer Flasks
United Scientific SuppliesBorosilicate Glass Erlenmeyer Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack, Narrow Mouth.
-
KIMAX Graduated Erlenmeyer Flasks
DWK Life Sciences (Kimble)With pennyhead Standard Taper stopper Designed from ASTM Specification E 1404, Type II Class 2 requirements Scale indicates approximate volumes
-
KIMAX Brand Class A, Serial Numbered Volumetric Flasks
DWK Life Sciences (Kimble)NIST Traceable Barrel-shaped glass stopper Meets ASTM Standard E 694 and E 288 Designed from Federal Specification NNN-F-289, Type 1, Class A Serial number, marking spot and stopper
-
TriForest Erlenmeyer Shaker Flasks are manufactured with virgin, optically clear, non leaching LEXAN® Polycarbonate resin that retains clarity after gamma radiation. The flasks are certified pyrogen free, DNase/RNase free, ideal for cell cultures, microbial cultures, plants, media preparation,…
-
Polymethylpentene (PMP) and Polypropylene (PP) volumetric flasks provide a break-resistant alternative to glass. Flasks meet Class B per DIN EN ISO 1042. Flasks are supplied with matching PP screw cap or stopper. The 10 mL size allows for accurate measurement of small volumes. Screw cap or…
-
10L Bottle/Filter Flask
United Scientific SuppliesWith its thick glass walls and sturdy construction, this 10L bottle/flask is perfect for filtering large volumes of liquid. The thick walls and design enables this flask to withstand vacuum filtration without imploding. Graduated in 1000mL increments on a scale from 2000mL to 8000mL with an…
-
RAY-SORB® Class A Heavy-Duty Wide Mouth Volumetric Flasks
DWK Life Sciences (Kimble)RAY-SORB® processed to protect materials sensitive to the light of shorter wavelengths Less than 1% transmission below 400 nm and approximately 5% transmission from 400-600 nm Pipet access is easy with wide-mouth volumetric flasks Superior strength, durability and safety provided by…
-
Flask, Single Neck
Ace GlassRound bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.
-
Graduated Erlenmeyer Flask, 3000mL With 38mm Cap
Bellco GlassManufactured from Type 1, Class A, Borosilicate glass and ideal for media storage and mixing Long-skirted screw cap protects flask contents from contamination
-
SYNTHWARE Round Bottom Vertical Three Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Heavy Wall 1L Round Bottom Receiving Flasks
Across InternationalAi 35/20 standard taper joint, heavy wall 1000mL round bottom receiving flask.
-
KIMAX Narrow Mouth Erlenmeyer Filter Flasks
DWK Life Sciences (Kimble)Heavy glass, without side tubulation ASTM Specification E 1406, Type I With capacity scale 250 mL flasks take rubber stopper No. 6; 500 mL flasks take No. 7; 1,000 mL flasks take No. 8; 2,000 mL flasks take No. 9; 4,000 mL flasks take No. 12. Flasks are fabricated from molded heavy…
-
Erlenmeyer Flasks with Screw Caps, with Capacity Scales
DWK Life Sciences (Kimble)KIMAX flask with a screw-thread finish. Used to mix and store culture media, and in other culturing techniques. Included are long caps with cemented-in white rubber liners, not attached. Designed from ASTM Specification E1404, Type III.
-
VITLAB, PFA Round Bottom Flasks
BrandTech®These corrosion- and leach-resistant flasks are excellent for rotary evaporation and distillation of high-purity chemicals. They are manufactured from PFA (a perfluoroalkoxy polymer) for excellent resistance to heat and chemical contamination, as well as smooth surfaces that greatly simplify…
-
Flask Erlenmeyer 10ml
DWK Life Sciences (Kimble)Used for metabolic studies of biological materials. Particularly useful in measuring C 14 O 2 yields following incubation. Also suitable for in vitro incubations, insulin bio-assays, persulfate oxidations, and the “distillation” of any volatile acid or base. …
-
KIMAX Heavy Wall Filter Flasks
DWK Life Sciences (Kimble)Heavy glass with side tubulation for tubing Sizes 25 mL through 4000 mL Designed from Federal Specifications NNN-F-240 Scale indicates approximate volumes Flasks are fabricated from molded heavy wall for strength and have a beaded bottom surface that prevents scratching and…
-
Chapman Specific Gravity Flask
Gilson Co. Inc.Chapman Specific Gravity Flask determines percentage of surface moisture and voids in fine aggregates Upper and lower bulbs contain 175ml and 200ml Stem is graduated from 375—450ml
-
SYNTHWARE Round Bottom Two Neck Flasks
Kemtech AmericaSYNTHWARE round bottom, heavy wall, two neck flasks with standard taper outer joints on both the center neck and the angled side neck. All sizes are hand blown from tubing to ensure uniform wall thickness.
-
Synthware Heavy Wall Volumetric Flasks
Kemtech AmericaHeavy Wall Available from 5mL-1000mL Individually Certified Class A Glass Stopper included
-
Low actinic stained glass provides protection for materials sensitive to light. The protective color is an integral part of the flask, which retains the mechanical strength, chemical stability, and thermal resistance of the PYREX brand labware. The heavy duty, wide mouth accommodates pipet filling…
-
Flask, Round Bottom, Three Neck
Ace GlassRound bottom flasks, three vertical necks, standard taper outer joints, standard and heavy wall. Flasks feature a flare-out directly below the center joint to facilitate cleaning and removal of stir blades.
-
Calibration/Measuring Flask Set Supplements, TC Metric System
SP Wilmad-LabGlassThese borosilicate glass graduated neck flasks come in sizes to supplement our official metric series, LG-4317. Additional sizes can be supplied on request. Calibrated "to contain" at 68°F/20°C.
-
Colorware Class A Flasks
DWK Life Sciences (Kimble)Available with markings in four colors, the KIMAX® Colorware flasks are brighter in appearance than traditional glassware with white markings. These flasks are also commonly used to help reduce cross-contamination and for easy identification of glassware between labs. KIMAX®…
-
KIMAX Brand Class A Accuracy Volumetric Flasks
DWK Life Sciences (Kimble)KIMAX® flask calibrated to contain Class A accuracy but without a serial number Supplied with a polyethylene snap cap Replacement cap is 28150R Designed from ASTM Specification E288 requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP…
-
Volumetric Flask, Class B, with Glass Stopper
United Scientific SuppliesDurable, machine-blown body. Heavy beaded tubing neck. Flasks feature a sharp graduation line and large white block letters. A ground glass stopper is included.
-
These volumetric flasks are highly-transparent, easy-to-clean, and meet Class A tolerances per DIN EN ISO 1042. Flasks are manufactured from PFA (a perfluoxy copolymer), which is highly resistant to heat and chemical contamination. PFA surface properties offer superior cleanability to glass,…
-
47mm Membrane Filtration Apparatus
Ace GlassBorosilicate glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy…
-
Molded to class B tolerance in translucent polypropylene with a tooled neck. Each flask is individually calibrated. Supplied complete with polypropylene stoppers and have the material and temperature characteristics printed in green.
-
Graduated Erlenmeyer Flask, 4000mL With 38mm Cap
Bellco GlassManufactured from Type 1, Class A, Borosilicate glass and ideal for media storage and mixing Long-skirted screw cap protects flask contents from contamination
-
DeLong Flask Comp,500mL
Bellco GlassDeLong culture flask Ideal for growing, storing and mixing of aerobic and anerobic cultures Borosilicate glass Type 1, Class A Graduated to approximate volumes
-
Conical Flasks
United Scientific SuppliesBorosilicate Glass Erlenmeyer Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack, Narrow Mouth with Screw Cap.
-
Round Bottom Four-Neck Flasks
SP Wilmad-LabGlassAvailable in various sizes, these borosilicate glass round bottom flasks have four vertical necks - one center neck and three side necks which are 90° apart. All necks have Standard Taper outer joints.