Quantitative cellulose filter papers are primarily used in gravimetric analysis procedures and perform separations by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media family is also widely used in methods to prepare samples for further…

Designed for general qualitative laboratory work Fast filtering speed; 25um particle retention Low retentivity, which retains coarse or gelatinous precipitates such as aluminum hydroxide, cobalt carbonate, mercury iodide and magnesium hydroxide Creped surface; thickness approximately…

Qualitative cellulose filter papers perform separation by entrapping particulate within the random matrix of cellulose fibers within the depth of the media. This media is widely used in methods requiring the determination and identification of particulate in both liquids and gas. Also, this natural…

Ahlstrom’s qualitative grades of filter paper are, by definition, recommended for use in analytical methods, which determine or identify particulate constituents of a mixture irrespective of the amount present. Qualitative filter papers are often used in routine separation work that still requires…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Mixed Cellulose Ester (MCE) Filtration of aqueous solutions; effectively…

Ahlstrom manufactures a series of extremely high purity, acid washed filter papers designed for use in analytical and gravimetric analysis. The quantitative grades are manufactured from top quality cotton linters using ultra-pure, reverse-osmosis water and are further treated with dilute acid to…

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…

Depth filtration glass micro fiber GRADE A-E - Fine porosity and fast flow rate, with a 1.0 µm size particle retention. Binderless borosilicate glass microfiber. DOP efficiency is 99.98%. Primarily used in suspended solids and air monitoring. Particle retention: 1.00 µm …

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they…

Finneran 25mm Syringe Filters are available in 0.2um and 0.45 um pore size. Autoclavable.

Depth Filtration Glass Micro Fiber GRADE C - Fine porosity, fast flow rate, with a 1.2 µm size particle retention. Primarily used for RIA procedures and harvesting lymphocytes. Binderless borosilicate glass microfiber. Particle retention: 1.20 µm Filtration speed: 25 seconds Thickness: 0.28…

Ahlstrom binder-free glass filter papers are ideal for use in water and wastewater analysis, gravimetric analysis involving ignition of the sample and filtration of hot gases and liquids. They are recommended for use in environmental applications, biochemical testing, as pre-filters and as direct…

A 33 mm diameter sterile syringe filter with a 0.1 µm pore size hydrophilic PVDF membrane. Designed for sterilizing protein solutions, tissue culture media, buffers and additives Feature a Millipore Durapore® PVDF membrane and are the lowest protein-binding syringe filters…

Dual Membrane Self-Locking Filter The Dual Membrane Self-Locking Filter for Pipet-Aids® eliminates the possibility of cross-contamination due to over-pipetting. This unique protective filter which incorporates both 0.8µm hydrophilic and 0.8µm hydrophobic membranes to prevent further use once…

Quantitative filter papers: Ashless quantitative filter papers are made of refined pulp and cotton linters with over 95% alpha-cellulose content. These filter papers are guaranteed to be free of any residual acids and have an ash content of

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Cellulose acetate (CA) sterile/non-sterile Cellulose acetate filters show a…

Minisart Plus: Fast, sterile filtration of high particulate liquids. Surfactant-Free Cellulose Acetate membrane (SFCA) and binder-free glass fiber (GF) depth pre-filter.

The interpretations by various auditors of the requirements of prepared filters for TSS and VSS analysis often differ from one regulatory body to the next. ProWeigh® Double filters from Environmental Express strictly document ALL preparation steps outlined in Standard Methods 2540D and E for…

Depth filtration glass micro fiber GRADE A - Fine porosity, fast flow rate, with a 1.6µm size particle retention. Frequently used in the filtration of precipitated proteins and cells. Ideally suited for use as a filter for radioimmuno assay of weak beta emitters by scintillation…

mdi PVDF membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

Finneran 25mm Glass Fiber Automatic Filters are suitable for manual and automated filtrations. Ideal for sample volumes up to 10mL. Autoclavable.

Minisart HF: Sterile filtration and particle removal. These ready-to-use syringe filter with Polyethersulfone (PES) membrane have excellent flow speed and high filterable volume.

Grade 470 papers are made of cellulose and diatomaceous earth and offer a much better separating capability than pure cellulose papers at the same rate of filtration. This grade quickly retains the finest particles at high flow rates.

Glass microfiber filters offered in this product range are produced from 100% borosilicate glass microfiber without the use of binders or strengthening agents. These filters offer many advantages in a wide range of analytical applications. The fibers used to manufacture these depth filters are…

Quick and efficient filtration of samples and all kind of solutions, solvents or gases Housing injected in Polypropylene or Acrylic Multifunctional Syringe Filters: equipped with luer-lock or luer-slip male connections for different applications Sterilized or non-sterile Available in…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyvinylidene difluoride (PVDF) This membrane features a stability and…

Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. These grades are thicker and have a high loading capacity and typically faster flow times. Recommended for filtering viscous fluids such as proteinaceous solutions and gels and as prefilter to extend…

Extend the life of final filters Pore sizes from 0.5 µm to 1.0 µm With or without binders Autoclavable PreSep prefilters are biologically inert and highly resistant to oxidizing agents and weak acids. Primarily used to extend the life of a final filter, they can…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Glass Fiber (GF) For viscose solutions or for turbid liquids. Ideal for use…

Ahlstrom manufactures a series of extremely high purity, acid washed filter papers designed for use in analytical and gravimetric analysis. The quantitative grades are manufactured from top quality cotton linters using ultra-pure, reverse-osmosis water and are further treated with dilute acid to…

I.W. Tremont offers a diverse product line of high quality membrane filters available in a variety of materials, diameters and pore sizes and suitable for a wide range of applications including cell retention, In Vitro Diagnostics, particle collection, clarification and sterile filtration of…

This filter grade is made of cellulose and diatomaceous earth and offer a much better separating capability than pure cellulose papers at the same rate of filtration. This grade quickly retains the finest particles at high flow rates. This paper grade is generally used for analytical and technical…