High-quality Econofilters are shipped in large packs and are ideal for busy labs that need fast, efficient filtration. Ideal for busy, high-volume labs Choose from a variety of membrane types and pore sizes   Agilent Technologies products are intended for…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they…

EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyamide/Nylon (PA) This is a hydrophilic material; it is recommended for…

Safe, convenient laboratory pipetting Pipets over 2,000 times without recharging Lightweight (<10 oz.), compact (<7 in.) and totally portable with power built into the handle Filtered, fail-safe nosepiece provides positive protection for electronic components and prevents…

mdi Hydrophilic PTFE membrane Syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand…

Syringe filters for convenient filtration of small sample sizes through membranes. Nylon (Polyamide) membranes are hydrophilic and widely used in both aqueous and organic solvent filtration applications.They are best used in a pH range of 3-14 and at an operating temperature below 100 degrees Celsius.

mdi Hydrophilic Polypropylene membrane Syringe filters type SYGP incorporate a hydrophilic polypropylene membrane with a multilayered binder free borosilicate Microglassfiber prefilter in a polypropylene housing. All mdi filters are color coded for ease of identification and offer a number of…

Finneran 25mm Glass Fiber Automatic Filters are suitable for manual and automated filtrations. Ideal for sample volumes up to 10mL. Autoclavable.

This 25 mm syringe filter with a Hydrophilic PVDF membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarifying of proteinaceous solutions with high particulate levels. PVDF membrane with graduated glass fiber prefilter Recommended for filtering solvents Non-sterile

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polyvinylidene difluoride (PVDF) This membrane features a stability and…

Syringe filters for convenient filtration of small sample sizes through membranes. Cellulose acetate membranes are hydrophilic membranes that offer excellent flow rates. They are low protein-binding and provide superior chemical resistance to alcohols and oils. They are best used at a pH of 4-8 and…

This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,…

Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock.

Finneran 25mm Glass Fiber Robot Filters were developed specifically for automated sample filtration systems. Autoclavable.

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Mixed Cellulose Ester (MCE) Filtration of aqueous solutions; effectively…

This 25 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.45 µm pore size used in clarification of organic solvents. 25 mm syringe filter is recommended for filtering 10–100 milliliter (mL) volumes to remove particles prior to…

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Cellulose acetate (CA) sterile/non-sterile Cellulose acetate filters show a…

Finneran 25mm Automatic Filters are suitable for manual and automated filtrations. Ideal for sample volumes up to 10mL. Autoclavable.

A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Color Code: Green Connections, Inlet/Outlet: Female Luer-Lok/Male Luer slip Maximum Inlet Pressure, bar (psi): 10 (145) Sterilization: Gamma irradiation

Syringe filters for convenient filtration of small sample sizes through membranes. PTFE membranes are permanently hydrophobic and resistant to solvents, acids, and bases.

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Glass Fiber (GF) For viscose solutions or for turbid liquids. Ideal for use…

Minisart NY25 Plus: Rapid small volume filtration and sterilization of solvent-based samples and difficult to filter aqueous solutions. NY25 X Plus includes a ployamide (Nylon) memrane with a binder- free glass fiber depth pre-filter.

mdi Nylon-66 membrane syringe filters are color coded for ease of identification and offer a number of unique performance advantages: HPLC Certified for low levels of UV-absorbing extractables Hydrophilic, no pre-wetting required Unique 16-channel design for very low hand pressure and…

EZFlow 13mm and 25mm Sample Prep Syringe Filters are designed for aqueous and organic solution samples. The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a…

Minisart NY: Polyamide, i.e. Nylon (NY), membrane provides rapid small volume filtration of both aqueous and solvent-based samples.

Well-suited for a variety of applications requiring maximum sample recovery Cellulose acetate filter Eliminates possibility of "popping" the filter Designed to sterilize and remove particulates from proteinaceous samples. Due to extremely low holdup volume and the negligible…

This 25 mm syringe filter with a Mixed Cellulose Esters membrane, for non-sterile filtration, has a 0.22 µm pore size used in Fine particle removal from aqueous solutions. Designed for fine particle removal from aqueous solutions Polyvinyl Chloride (PVC) housing Hydrophilic…

CELLTREAT Scientific Products offers an extensive line of disposable syringe filter devices designed specifically for the filtration of culture media and organic solvents in research and industrial laboratories.  They are made with an ABS housing in various diameters which contains a…

33 mm Medical Millex Filter Units A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Medical Millex filters remove microorganisms, particles, precipitates, and undissolved powders larger than 0.22 μm from aqueous solutions. 33 mm…

Finneran 25mm Glass Fiber Syringe Filters are available in 0.2um and 0.45 um pore size. Autoclavable.

Non-sterile Millex filter units offer unsurpassed quality, consistency, and reliability of results to accelerate the filtration process. Higher Operating Pressures and Faster Filtration The overmolded housing design provides a more robust filter, with a maximum housing pressure of 150 psig…