4 mL capacity 15 x 45 mm Custom fit for 7673,7683 and 6850 autosamplers Screw top 4 mL glass vials are a custom fit to the Agilent 6850 autosampler tray for use as sample as well as wash vials.  Vials with fill marks are also appropriate for use as wash vials and waste vials in 7673 and…

Manufactured from Type I borosilicate glass Screw thread finish eliminates the need for crimping tools Accept 18mm screw thread closures with septa For use with CTC Analytics Systems requiring magnetic closures Also compatible with modern Agilent, Perkin Elmer and Tekmar autosamplers that…

Screw Top Convenience Packs are an easy way to get 500 of each component using one catalog number. Packed in a six drawer, reusable, blue plastic cabinet, 500 screw top vials and screw caps with septa installed are kept handy and dust-free. Agilent Technologies products are intended for…

Glass Insert/Plastic Outside Vials are a combination of Type I low extractable borosilicate glass inserts and clear or amber thermoplastic polymer outer vial shells. Only the glass contacts the sample and the seal. Item No. 302511CP-12 The new Finneran 4-Fin Polypropylene 11mm Crimp/Snap…

12 x 32 mm, Type 1 borosilicate glass Compatible with standard crimp closures 1.5 mL total volume Less than 5 µL dead volume Micro-V vials are compatible with standard crimp closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume. They are…

Fits most autosamplers Crimp seal finish Flat or rounded bottoms Beveled edge Type 1 borosilicate glass Clear glass vials with 20mm crimp seal finish are designed to fit most headspace autosamplers Flat bottom vials maximize heating efficiency when used with bottom Round…

Use with Snap Ring™ or Snap Seal™ vials Snap on and off easily No sharp aluminum edges 2686S94 through 2686T10 are Polypropylene GC Snap Top Caps. 2686T21 through T42 Snap Top Caps are for Shimadzu Autosamplers. All caps are 11 mm. Caps may be snapped on and off…

Manufactured from borosilicate glass Use with 11 mm aluminum E-Z Seals Ensure quality and reliability while maintaining sample integrity Packaged in shrink-wrapped trays of 100 for convenience and cleanliness

Transform Agilent vials from full-capacity to limited volume with one simple step. Inserts are compatible with Agilent wide opening screw top, crimp top and snap top vials. Conical Inserts with Polymer Feet (2714M52, N29, N42) With the correct default setting on an autosampler, these inserts…

Preassembled closures and septa come ready to use. Designed to work in Agilent or other robotic arm autosamplers.

Narrow neck vial w/8-425 thread finish High quality 33 expansion borosilicate glass or amber 51A glass Uniformly flat bottom for security with inserts I-D™ vials feature write-on patch with graduations at 0.5, 1.0 and 1.5mL Glastic vial features a glass insert pre-inserted…

Open-top closure

Big mouth screw thread vials - 12 x 32 Type I borosilicate glass Clear or Amber 40% larger opening Broken needles can be prevented due to the larger target area. Incorporates unique StepVial design that precisely centers a limited volume insert in the vial neck. Marking and…

Agilent provides a wide variety of micro and 2 ml vials and caps compatible with the Combi Pal and GC Pal listed in the Vials and Caps section. Below are the most popular vials and caps. Agilent Technologies products are intended for sale/shipment within the US only. International customers…

F217 is a triple layer liner that consists of a foamed polyethylene core between two layers of virgin low-density polyethylene. The liner is faced with another layer of PTFE (polytetrafluoroethylene). The lined polypropylene closures have excellent chemical resistance, a low moisture transmission…

Interlocked™ Vial is composed of a glass vial and a clear glass insert fused together thus eliminating any movement of the insert and concerns about contaminants around the fused seam/space between the neck of the vial and the insert.

Agilent provides a range of high quality, sample and storage vials for a variety of samples and applications. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders…

Pre-assembled caps with Septa 10-425 thread finish

1.5mL Polypropylene vial with septum cap for Dionex AS-50 and AS-AP Autosampler. The septum is slit for easy penetration The septum is a laminate of blue PTFE on the bottom and white silcone on the top

PUR caps are recommended to help prevent sample or buffer evaporation even after multiple injections. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for…

Big Mouth Vial, 2.0 mL Volume, 12 mm Diameter x 32 mm Height Unassembled Convenience Packs with closures/septa, 10-425 mm Complete components Easy choice Clear or amber vials Components (vial, cap/seal and liner) are packaged, unassembled or assembled, in clear trays or…

For use with all 12 x 32 mm crimp top vials No more cuts from sharp metal edges Eliminates breakage during crimping or decapping Plastic cap can be crimped using a crimping tool or attached by hand permitting an airtight seal by either method. The Poly Crimp seal aligns itself on the…

Clear borosilicate glass with a 0.125” septa Borosilicate glass vials come with a standard 0.125 in. thick, I-CHEM blue, PTFE/silicone septa in an open-top 24-414 polypropylene cap. The I-CHEM molded-in septa retainer ring holds the septa securely in place without bonding to the cap,…

Conical Inserts with Polymer Feet Microvolume inserts transform vials from full-capacity to limited volume with one simple step. The inserts featured here are compatible with 8-425 screw top vials. Conical Inserts with Polymer Feet (2714S18) Polymer feet act as the inserts' shock absorber to…

Available in clear or amber Type I borosilicate glass or polypropylene. Glass vials feature thicker walls for safer handling. Available with marking spots. Limited volume shell vials have a precisely designed conical bottom which permits maximum sample evacuation.

The Pliers Decappers are an inexpensive and easy way to remove aluminum seals. This tool is manufactured from steel with red plastic-coated handles. To remove a seal, simply secure the seal between the jaws, squeeze the handles and twist.

8-425 Screw Caps without Septa (2714S28) Open top polypropylene screw caps without septa are recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) …

Largest available variety Save reagents Requires less sample Limited volume inserts are available in a variety of designs to accommodate all size vials and all types of autosamplers. Polymer Top Springs™, bottom springs and metal springs act as shock absorbers that protect…

100uL Limited Volume Large Opening R.A.M. Vial. Glass insert with clear plastic vial 100uL Limited Volume Large Opening R.A.M. Vial. Glass insert with amber plastic vial

The 1.7mL can be used for applications in Ion Chromatography, Capillary Electrophoresis, Atmic Absorption and is ideal for pH-sensitive samples, sodium and heavy metals analyses and aqueous samples. This vial is specifically designed to work in robotic arm autosamplers. To ensure that you are…

Borosilicate glass vial with 300 µL glass limited volume insert Limited Volume Insert is fused to vial which prevents needle damage Writing patch on all vials

General Purpose Septa Economy Blue Silicone Soft - easy to penetrate Maximum temperature of 250°C Designed for non-demanding, routine applications. Durometer rating of 40 - 45. Suitable for 90% of all GC analyses.