Supplies, General Lab Products
-
Vent Filter Screw Cap 45mm
Bellco GlassManufactured from polypropylene. Ideal for addition and withdrawal of contents via syringe. 45mm cap has 33mm hole to accommodate 45mm septa or 45mm port assembly. 32mm cap has 20mm hole to accommodate 32mm septa or 32mm port assembly. Size: 32mm & 45mm O-ring seal Male luer lock
-
Straight Harvesting Tube 10L 1/2"
Bellco GlassMaterial: 316l stainless steel with ra finish of 32 inch or better, inside and out Dimensions: od x id:1/2? x .430? x 10? long
-
Micro-Carrier Impeller Assembly 6-8L
Bellco GlassImpeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 6-8l Paddle dimensions: 3?x 7 3/4?
-
Dow Corning® high-vacuum silicone grease colorless
MilliporeSigmaSeals and prevents freezing of stopcocks and ground-glass joints in high-vacuum systems at pressures less than 10-6 mm Hg. Heat stable (-40 to 260 C), low vapor pressure, and chemically resistant. Colorless. 5.3 oz. tube. Legal Information: Dow Corning is a registered trademark of The Dow…
-
Glass Micro-Carrier Impeller Shaft 15-36L
Bellco GlassManufactured from type 1 class a Borosilicate glass. For spinner flasks 3l to 36l Dimensions: 9mm x 500mm long
-
Stainless steel curved harvesting tube for 8l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 8l Dimensions: 1/2" x .430 x 20"
-
Large Flange Air Stone Sparger 15L
Bellco GlassLarge flange air stone sparger for large flange vessels. Fits through stainless steel head plate fitting. These spargers fit through a 5/16? fitting. 316 l stainless steel Ra 32 finish or better Acrodisc filter assembly, 0.2 micron
-
Metal Stone Sparger 5L For Round Bottom Omni Vessels
Bellco GlassMetal stone sparger 5l for flat or round bottom omni vessels. Sparger inserts through stainless steel headplate fitting. 4 1/2?wide x 14? long 316 l stainless steel ra 32 finish or better Stainless steel frit
-
Probe Holder 32mm
Bellco GlassIncludes gl32 blue open top polypropylene cap and white silicone gasket. The probe holder is designed specifically for the bio-probe low volume spinner flask. Also designed to secure ph and do probe into 32mm sidearms.
-
Stainless Steel 3-Port Assembly 500mL 70mm
Bellco GlassSize: 500ml Seam welded w/ electropolish finish 3-port w/ siphon, fill & vent tubes Includes: 45mm pp cap & silicone gasket Dimensions: 1/4? x 5/32? Longest tube: 2 5/8? at bend Neck: 70mm
-
Stainless Steel Bent Harvesting Tube 5L 1/4"x16"
Bellco Glass316l stainless steel bent harvesting tube for 5l flat bottom omni vessel. Use with large flange head-plate. Size: 1/4" x 16" Id: 5/32"
-
Stainless Steel Shaft Assembly 3L
Bellco GlassManufactured from 316l stainless steel. Impeller assembly for micro-carrier spinner flasks. 1965 series micro-carrier spinner flask Size: 3l
-
Stainless Steel 2-Port Assembly 8L
Bellco GlassAll port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene screw cap and white silicone gasket. Size:…
-
Bellco Heating Blanket 115V-3L 130 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Flask size: 3l bioreactor vessel (1964-88403) Dimensions: 15? x 2.5? tall with 1 latch Watts: 130 heating @ 5 watts per sq inale iec connector for use…
-
3-Port Harvest Assembly 8L
Bellco GlassMaterial: 316l SST with electropolish finish, ra 32 or better, inside & out Dimensions: harvest tube (3/8" od) - 1" above slug, 15" insertion length Addition tube (1/4"od) - 1" above slug, 2 21/64" below Vent tube (1/4" od) - 1" above slug, .975" below Supply with 45mm pp blue open top screw cap &…
-
Micro-Carrier Impeller Assembly 15-36L
Bellco GlassImpeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 15-36l Paddle dimensions: 3"x 10"
-
English threads Fits into 3/8" holes in headplate material 316l SST with electropolish finish - ra 32 finish inside & out Inside dimensions: .250" od x 19 1/4" overall length insertion length: 18" with hose barbs supply with SST nut & o-ring
-
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: low profile 3l & 6l vessel Watts: 190 Dimension (in.): 2…
-
Micro-carrier Impeller Assembly 500mL
Bellco GlassImpeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and ptfe paddle. Impeller size: 500ml Paddle dimensions: 1" x 3"
-
Stainless steel curved harvesting tube for 15l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 15l Dimensions: 1/2" x .430 x 22"
-
Stainless Steel Shaft Assembly 250mL
Bellco GlassManufactured from 316l stainless steel. Impeller assembly for micro-carrier spinner flasks. 1965 series micro-carrier spinner flask Size: 250ml
-
Stainless Steel Shaft Assembly 500mL
Bellco GlassManufactured from 316l stainless steel. Impeller assembly for micro-carrier spinner flasks. 1965 series micro-carrier spinner flask Size: 500ml
-
Thermowell Assembly 8L
Bellco GlassThermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Thermowell assemblies for 1965 and 1967-style angled sidearm…
-
Bellco Heating Blanket 230V-500mL 50 Watt
Bellco GlassHeating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 500ml Watts: 50 Dimension (in.): 1 x 10.5 1 latch 6ft…
-
Extended Heat / Cool Coil 36L
Bellco GlassHeating and cooling coils are used for cell culture temperature manipulation within the bioreactor vessel. Must be hooked up to a water circulating mechanism for heating or cooling. 316l electropolished stainless steel For cell culture temperature manipulation Od x oal: 3 1/4 x 22" #turns: 5 1/2…
-
Thermowell Assembly 15L
Bellco GlassThermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Thermowell assemblies for 1965 and 1967-style angled sidearm…
-
Stainless steel curved harvesting tube for 5l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 5l Dimensions: 1/4" x 5/32 x 14 1/4"
-
Thermowell Assembly 6L
Bellco GlassThermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube Thermowell assemblies for 1965 and 1967-style angled sidearm…
-
RTV Red Glue #106 2.8oz
Bellco GlassRtv red glue #106 208oz Used for replacing silicone pads in pipette cans. Easy to use nozzle and adheres to stainless steel aluminum, glass, and rigid plastics. Curing time: 24 hours Temperature range: 60-260 degree Celsius Storage conditions: below 27 degree Celsius
-
Metal Stone Sparger 15L For Flat Bottom Omni Vessels
Bellco GlassMetal stone sparger 15l for flat or round bottom omni vessels. Sparger inserts through stainless steel headplate fitting. 4 1/2?wide x 20 1/2? long 316 l stainless steel ra 32 finish or better Stainless steel frit
-
Digital IOB Insect System 3L 230v
Bellco GlassDesigned for growing insect cell cultures such as sf9 and sf21 cells. The system comes complete with all accessories needed to grow your insect culture line for expression. Consist of: 7785-d2015 digital 5-position magnetic stirrer, 230v 1965-13000 micro-carrier spinner flask, 3l 1965-60030 iob…
-
Stainless Steel Bent Harvesting Tube 36L 1/4"x20"
Bellco Glass316l stainless steel bent harvesting tube for 36l flat bottom omni vessel. Use with large flange head-plate. Size: 1/4" x 20" Id: 5/32"