Supplies, 10 mL
-
labForce® Serological Pipettes, Individually Wrapped, Sterile
labForce® (powered by Thomas Scientific)Made from high clarity 100% virgin polystyrene. Individually wrapped Color-coded for easy identification Negative graduations for extra volume Sterilized by E-beam, SAL=10¯6. Non-pyrogenic, non-cytotoxic and non-hemolytic DNase/RNase free Polyolefin fiber filter to reduce…
-
Plastic syringes without needles Sterile, designed for single use Non-toxic; non-pyrogenic Clear barrel with bold scale markings Offered in three luer tip styles, all of which take 8956A48 series disposable needles. Syringe capacity is plainly marked on wrapper. 1195R79,…
-
PYREX® Griffin Low-Form Beakers
CorningUniform wall thickness Large marking spot Spout Standard Griffin Beakers with spout, manufactured with uniform wall thickness, offer optimum balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated…
-
Non-sterile, clean, ready-to-use Assembled, graduated Bulk packed in double wrapped polybags. Can be autoclaved or gas sterilized out of polybags. 8940S32, 8940S69, 8940T39, 8940T75, & 8940V50 *Intended use for general purpose fluid aspiration/injection and NOT for storage…
-
Disposable Plastic Syringes
National ScientificFor use with syringe filters No rubber or synthetic plunger gaskets No silicone oil lubricant Luer-Slip or Luer Lok® fittings Two-part, all plastic syringes have polypropylene barrels and either polypropylene or polyethylene plungers for a wide range of chemical…
-
Disposable, sterile, PYREX® individually wrapped Calibrated "to deliver" Has negative graduations and fire-polished tips for burr-free, even flow rates Individually wrapped in Steri-View™ wrapping (one side paper, one side plastic) for easier identification and opening
-
With spout and hexagonal base Supplied with shock absorbing bumper guards. Cylinders are calibrated “to deliver” in accordance with ASTM E-1272 and ASTM E-542 or “to contain”. The double scale, numbered up and down, is in durable white enamel.
-
The strength of these flasks has been increased appreciably through machine-blown bodies. Sealed, heavy-beaded, heavy-tubing necks are tooled for snap-cap fit. Graduation line is sharp, permanent and large; white block letters make the inscription easy to read. 1 mL and 2 mL sizes are…
-
Serological Pipets, Bulk Packed
Celltreat ScientificCELLTREAT disposable Serological Pipets are manufactured from optically clear polystyrene in a class 100,000 clean room. The 1ml, 2ml and 5ml are a one piece construction and the 10ml, 25ml and 50ml pipets are made with a durable ultrasonically welded 3 piece construction. CELLTREAT pipets are…
-
Calibrated 1000 Series Syringes
HamiltonHamilton Company offers a calibration service for precision syringes and Digital Syringes. A Certificate of Calibration is provided with the product and the procedure is performed with an unbroken chain of calibrations traceable to N.I.S.T. Calibrated precision syringes are available only at…
-
With barrel-shaped Standard Taper glass stopper Calibrated to contain at 20°C
-
MOHR Pipettes
United Scientific SuppliesMeasuring (Mohr Type) pipettes are manufactured from specially selected, heavy wall machine drawn borosilicate accurate bore glass tubing. They have precision fored jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain; both are resistant…
-
These PYREX VISTA Class A graduated cylinders are calibrated either “to contain” (TC) or “to deliver” (TD), and have blue enamel graduations. The cylinder capacity is in accordance with ASTM E-1272. The 10mL size has a funnel top.
-
Accuflow Serological Pipettes
AccuflowEasy opening by either pop-through or peel-apart techniques Bi-directional graduations are printed in bold easy-to-read black ink Sterile, individually wrapped and certified RNase , DNase , DNA, and pyrogen free Color coded stripes and packaging enable quick volume…
-
PYREX® VISTA volumetric flasks provide precise volume measurement. The necks are tooled for Standard Taper glass stoppers. The graduation line is sharp and permanent and large blue block letters make the inscription easy to read. The 1 mL and 2 mL sizes are test tube shaped. These Class A…
-
Oral and enteral syringes help safely deliver nourishment and oral medications with accuracy.
-
Safety without compromises Virtually eliminates splatter and aerosolization Allows for needle changes depending on protocol Easy-to-use SafetyGlide™ mechanism SafetyGlide™ Activation-Assist mechanism is single-handed, quick and easy to operate. Protective arm is…
-
Pre-Scored Ampules
DWK Life Sciences (Wheaton)Pre-scored to eliminate filing Clear ampules are made from low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Amber ampules are made from amber borosilicate glass that conforms to USP Type I requirements for light transmission to protect…
-
Gay-Lussac With capillary glass stopper ground to flat-sided point for take-off of overflow 10 mL and 25 mL sizes are for ASTM Standard D 369 and Barrett test H-8; AASHTO standard T-74 *min order of 10 each
-
Plastic Serological Pipettes
Globe ScientificNEW! Improved packaging, pipette design, and improved accuracy. Globe Scientific's plastic serological pipettes are produced under the strictest protocols and offer the highest degree of accuracy. The pipettes are supplied with an aerosol barrier plug that prevents both liquid and…
-
Serological Pipets
EppendorfEppendorf’s serological pipets are designed to work in perfect harmony with your Easypet 3. The pipets offer precise graduations overlaid on the ultraclear pipet material to facilitate quick and easy reading of the volume. The pipets are individually wrapped and packaged in a robust dispenser…
-
Serological Pipets
Celltreat ScientificNEW – Now available in 100mL size for large volume pipetting Peel-to-open plastic/plastic wrappers are the ideal option for eliminating particulate; proven benefit over traditional paper/plastic wrapper Wrappers reduce static cling versus other brands of plastic wrap pipets All…
-
Mohr Measuring Pipet
Vee Gee ScientificThe Mohr Measuring Pipet, delivers and drains out. It meets ASTM E-1293 Style 1, Class A Specifications and USP Standards for volumetric glassware.
-
Disposable Polystyrene Beakers
Eagle ThermoplasticsDisposable, translucent polystyrene, resistant to diluted or weak acids, alcohols and bases Usable to 200°F, with four-way pour spouts Smaller sizes suitable for use as sampling cup for atomic absorption units, flame photometers and blood cell counters. Graduations on 150 mL and larger,…
-
Glass Beaker, Low Form
United Scientific SuppliesOur beakers are made from low-expansion borosilicate glass. Beakers feature heavy and uniform wall thickness, spouts designed for easy pouring, and beaded tops. The 20ml and larger sizes also have white printed graduations and a marking area. Tolerance for beakers is approximately +- 5%.
-
For use without filter paper Offered in nine sizes and three porosities Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material…
-
These reusable PYREX® pipets are calibrated to Class A tolerances in accordance with ASTM E-542, and ASTM E-1293. Each pipet is individually serialized and supplied with a Certificate of Identification and Capacity, traceable to NIST standards. Calibrated "to deliver" (TD) their total…
-
Pipets are color-coded by size for easy identification and sorting. Colored graduations are enameled onto the glass. These “to deliver” pipets must be blown out to obtain total rated capacity. Reference: ASTM E-1044.
-
Shorty Wobble-not Serological Pipets
VistaLab TechnologiesShorty Wobble-not pipets for even easier pipetting, especially when paired with ali-Q! Less wobble, less drip, less hassle especially when pipetting in a hood. 10 inches tip to end Unique patented 2-tier step design at plug end Individually wrapped in paper/plastic Sterile…
-
-
PreciseDose Dispenser™, Amber
MediscaThe PreciseDose Dispenser™, MEDISCA’s line of branded syringes, is an FDA-registered medical device manufactured in an ISO 13485 facility. These oral and topical syringes are designed uniquely for the compounding industry. With quality in mind, these syringes were tested against…
-
Class A, USP, certified graduated pipette. Type 2 total delivery pipette only requires setting meniscus one time. In the DIN EN ISO 835 standard, the waiting time has been reduced from 15 to 5 seconds. High contrast blue enamel represents the optimum combination on resistance and readability. Full…