Solutions, 4 L
-
Hydrogen Peroxide, 35% (w/w), Technical
Reagents®Concentration: 35% w/w Composition: Water 65%, Hydrogen Peroxide 35% Density: 1.14 Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient DOT: UN2014, HYDROGEN PEROXIDE, AQUEOUS SOLUTIONS, 5.1…
-
Formaldehyde, 10% (v/v), Volumetric
Reagents®Concentration: 10% v/v Composition: Water 93.49%, Formaldehyde 3.90%, Methyl Alcohol 1.58%, Sodium Phosphate Dibasic 0.64%, Sodium Phosphate, Monobasic Monohydrate 0.39% Density: 1.02 Color: Colorless liquid Physical State: Liquid pH Range: 7 Solubility Information: Miscible Synonyms:…
-
-
EDTA Titrant, 0.1M, Standardized
Reagents®Concentration: 0.100M Composition: Water 96.34%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 3.66% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible …
-
Ammonium Hydroxide, 26 Be, Purified
Reagents®Composition: Ammonium Hydroxide 28%, Water 72% Boiling Point: 24.70 °C Density: 0.9 Melting Point: -72°C Color: Colorless liquid Physical State: Liquid pH Range: 12 Solubility Information: Miscible Shelf Life: 37 Months Storage: Ambient DOT: UN2672, AMMONIA SOLUTIONS, 8, P.G. III
-
Sulfuric Acid 5.0N
ExaxolThe Exaxol 5N sulfuric acid features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…
-
Ricca Surface Cleaning Solutions
Ricca ChemicalThis product is intended for laboratory cleaning and disinfection purposes and is typically used for disinfection of surfaces. All components of this product are filtered as part of the manufacturing process. The residue after evaporation is typically 0.001% (10 ppm) maximum at the time of…
-
Sodium Hydroxide Solution, 50% W/W
GFS ChemicalsNaOH CAS#: 1310-73-2 F.W.: 40.00 Suitable for Kjeldahl use.
-
LabChem Sodium Thiosulfate
LabchemThe LabChem sodium thiosulfate has a non-flammable formulation and comes in a poly bottle container. It is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Ricca Scott's Bluing Reagent (Scott's Tapwater Substitute)
Ricca ChemicalThe Ricca Chemical 1 Liter Scott's bluing reagent is used for the preparation of nuclear hematoxylin stain in cytology and histology. Application: Bluing Agent For Nuclear Hematoxylin Stain
-
-
Fehling's Solution A
chemForce® (powered by Thomas Scientific)Harmonized #: 2833.25.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.04 DOT: Not regulated Appearance: Blue Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: Health
-
The Exaxol 0.1 N potassium hydroxide in IPA, is mainly used in preparing soaps. It is used in manufacturing insecticides, disinfectants and pesticides. Potassium hydroxide is suitable for use in electroplating and lithography processes. It is also used for paint and varnish removal. Application:…
-
Sodium Hypochlorite 5% w/v
ExaxolThe Exaxol 5% sodium hypochlorite with a heavy metal-free formulation comes in a poly bottle and is an ideal solution to have in chemical laboratories and research facilities. Application: For Laboratory use only
-
Sodium hydroxide solution, volumetric, 0.1N in water
BeanTown ChemicalCAS: 1310-73-2 EC No: 215-185-5 MDL No: MFCD00003548 Liquid Linear Formula: NaOH MW: 40.00 Melting Point: -12-10° Boiling Point: 105-140° Density (g/mL): 1
-
The LabChem 4 pH acetate buffer in slight vinegar odor, is perfect for chlorine and iodine. Application: For Laboratory and Manufacturing Use Only
-
LabChem Reagent Alcohol
LabchemThe LabChem reagent alcohol in liquid form, is soluble in water, ether, aceton, chloroform, oils/fats, methanol and acids. It is highly flammable in liquid as well as vapor and has alcohol/pleasant odor. Application: For Laboratory and Manufacturing Use Only
-
You will be hard-pressed to find another company that offers tighter specs and a wider range of conductivity standards. Tested in an ISO 17025 Accredited Laboratory.
-
The LabChem 0.5N in ethanol potassium hydroxide in liquid form, is soluble in water, methanol and ethanol. It is highly flammable in liquid as well as vapor and has alcohol odor. Application: For Laboratory and Manufacturing Use Only
-
The LabChem 1% starch indicator solution in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only
-
-
Piperidine
MilliporeSigmaSynonyms: Hexahydropyridine Chemical formula: C5H11N Molar mass: 85.15 Storage: Room Temperature CAS number: 110-89-4 Comments: Contact Customer Service for the requirements to purchase this product. Merck USA index: 13 7549 Molar mass: 85.15
-
Ricca Zenker's Fixative Solution
Ricca ChemicalThe Ricca Chemical zenker's fixative solution with a composition of 91.98% water, 4.72% mercuric chloride, 2.36% potassium dichromate and 0.94% sodium sulfate anhydrous, is most commonly used in some staining procedures. It is suitable for use in histological preservation and in radio autographic…
-
EDTA Titrant, 0.01M, Standardized
Reagents®Boiling Point: 100°C Color: Colorless liquid Composition: Water 99.62%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.37%, Magnesium Chloride Hexahydrate 0.01% Concentration: 0.01M DOT: NOT REGULATED. Density: 1.02 Melting Point: 0.0°C Physical State: Liquid …
-
Ricca 10% (w/v) (100 g/L) Sodium Hydroxide
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Ricca 0.1% (w/v) Methyl Orange Indicator
Ricca ChemicalMethyl orange is a pH indicator frequently used in titration because of its clear and distinct color variance at different pH values. Methyl orange shows red color in acidic medium and yellow color in basic medium.
-
Ricca TCLP Extraction Fluid
Ricca ChemicalThe Ricca Chemical TCLP extraction fluid with a composition of 99.14% water, 0.60% acetic acid and 0.26% sodium hydroxide, is suitable for use in EPA 1311 toxicity characteristic leaching procedure (TCLP) testing which ensures safety of the environment. It can be stored at a temperature of 15 to 30…
-
Meets requirements of both ISO 17025 and ISO 17034 Certified Reference Materials, made under the strictest standards for stability, homogeneity, and accuracy Tested to tolerances of ±0.5% Supported by detailed Certificate of Analysis including temperature variation values and stated…
-
Ricca 2% w/v Starch Indicator
Ricca ChemicalStarch solutions are used as indicators in the detection of the endpoint of titrations involving Iodine solutions. Starch reacts with Iodine in the presence of Iodide ion to form an intensely colored blue complex, which is visible at very low concentrations of Iodine, making it a very good…
-
Potassium iodate solution, volumetric, 0.1N in water
BeanTown ChemicalCAS: 7758-05-6 EC No: 231-831-9 MDL No: MFCD00011406 Liquid Linear Formula: KIO3 MW: 214.00 Density (g/mL): 1
-
Starch Indicator, Volumetric
Reagents®Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: White translucent liquid Physical State: Liquid Solubility Information: Miscible Storage: Ambient DOT: NOT REGULATED.
-
The LabChem 0.01N sodium hydroxide in liquid form, is soluble in water. Application: For Laboratory and Manufacturing Use Only