Always Ready Well-equipped for challenging tasks. The highly robust PEEK shaft in combination with the open junction makes the InLab Expert both resilient and easy to handle. Its solid reference electrolyte requires no refilling and is always ready for use. If highest performance is expected,…

pH and temperature measurement with one electrode Superior stability with high accuracy pH and temperature measurement Fast pH response even in samples at varying temperatures Compatible with Mettler-Toledo TM Five and Seven Series meters and others which accommodate NTC30 thermisters with…

The 9-in-1 DO700 Kit measures DO concentration/saturation, pH, mV, Temperature, Conductivity, TDS, Salinity, and Resistivity. It features automatic salinity compensation and manual barometric pressure compensation for DO measurements. In addition, it has automatic one button calibration of 4, 7 and…

4215F10 Mercury-free, Ag-AgCl type, with sleeve junction. Designed for use with Thermo Orion ion-selective electrodes as indicated in respective descriptions; usable also with glass electrodes for pH measurement. Range 10 to 100°C. Length 140 mm, diameter 13 mm. Diameter of mounting cap 16 mm. …

For regular use and harsh environment processing Four measurement ranges Rugged waterproof casing Sodium electrode determines direct concentrations of salt in solutions. Features automatic, 2-point calibration and fixed temperature compensation at 25°C (77°F), low battery…

Nothing is Impossible The more precious or limited the sample, the greater the challenge to use it for analysis. The narrow sensor shaft of micro pH sensors fits in nearly every sample container and enables measurements of sample volumes down to the lower μL ranges. InLab Flex-Micro:…

Fast and accurate readings for the cost of a few rolls of litmus paper 3,000 hours of continuous use Large, easy-to-read LCD Range: 0-14 pH; resolution: 0.1 pH; accuracy: ±0.2 pH Manual, two-point calibration Checker 1 testers have a replaceable screw-type combination pH electrode.

4210N68 Requires Thomas number 4215F60 reference electrode. Includes 760 mm lead. Uses Orion 900002 fill solution, order as 4215F70. Accessories Chloride Standard, 0.1000 ±0.0005M Chloride Standard, 100.0 ±0.5 ppm Ionic Adjustment Solution, Sodium Nitrate…

Immersion depth is 2 mm, designed for NMR cells. pH range is 0-14. Temperature range is -5 to 100°C. Dimensions: 228 mm x 2.5 mm; tip diameter: 2.5 mm. Type reference: Ag/AgCl.

Automatically log up to 4,000 readings or manually record 99 readings, each with pH, mV (supports ORP), °C or °F, time and date Review all data on the meter’s display or download with the included software Three point calibration with automatic buffer recognition indicating the number…

Measure the pH of virtually any sample with these Thermo Scientific Orion pH electrodes. Electrodes come with a low cost epoxy body Sealed, gel-filled design means there is little electrode maintenance to perform Single-junction reference means electrodes are suited to most general…

7-in-1 Meter with Lab-Quality Performance Measures Conductivity, TDS, Salinity, Resistivity, pH, mV and Temperature Waterproof housing (meets IP57) Automatic one button pH calibration (4, 7, and 10pH) Choice of 3 point pH calibration for better accuracy One point Conductivity calibration…

4210S12 Polymer membrane electrodes measure nitrate concentration in the range of 14,000 to 0.1 ppm in soils, plant materials, fertilizers, pickling baths and other aqueous solutions. Other uses listed in Standard Methods. EPA approved for NIPDWR compliance monitoring Optimal temperature range…

Time is Precious Liquid filled electrodes are reliable workhorses, constructed for efficient pH measurements in daily laboratory use of a wide application range. For more complex sample matrices like emulsions or biological media, electrodes with a sleeve junction are recommended. InLab…

Conduct routine pH measurements with the Thermo Scientific™ Orion™ Economy Series pH Combination Electrode, a routine wick junction, gel-filled electrode. Its unbreakable epoxy body extends beyond the pH sensing glass bulb for rugged conditions. It provides durability for lab or field…

Useful Helpers - When Two are Better Than One In some cases it is advisable to use a separate pH half-cell and reference electrode instead of a combined pH sensor. pH half-cells are recommended for applications in which the service life of the pH electrode is significantly less than that of…

Peek Shaft, Open Junction "Safelock" closing ring Silver ion trap pH-sensitive glass membrane Contains no poisonous heavy metals but consists solely of non-polluting silver/silver chloride components. An Argenthal element developed by Ingold provides a lead-off system which offers…

Perform basic pH measurements quickly and reliably with Thermo Scientific™ Orion™ Basic Electrodes, for use with Orion™ Russell meters.

Refillable, combination pH electrode for general laboratory purposes as well as beer testing. Reference: single, Ag/AgCl Junction/Flow Rate: ceramic, single / 15-20 µL/h Electrolyte: KCl 3.5M + AgCl Max Pressure: 0.1 bar Range: pH: 0 to 13 Recommended Operating Temp.:…

Combination pH and ATC in a single barrel pH range: 0-14 Temperature range: 0-90°C Recommended for general purpose use. Built-in thermistor for automatic temperature compensation. Useful for field pH measurements with Thermo Orion portable pH meters. BNC type connector. ATC…

Free of lead and mercury unlike many pH electrodes allowing easy disposal Meets all RoHS requirements Durable plastic body that can be used under rugged conditions Waterproof BNC connector is impervious to water Orion green electrodes offer a lab or field pH electrode that…

Pocket-sized ISE meter with interchangeable sensor modules Waterproof design with rubberized housing Automatic shut-off and low battery indicator Memory saves calibration values and stores up to 15 readings Chlorine and pH also display sample temperature PockeTester…

Rugged 3-in-1 probe provides long life Probe is engineered to resist contamination. Particularly suited to harsh conditions, the probe incorporates a pH electrode with a cloth junction and gel polymer electrolyte for long life and greater stability of readings. The probe has a 6-month…

Triode, gel-filled combination electrode with epoxy body for durability Waterproof E DIN connection with a 1 m cable and banana plug connectors Measures pH and temperature with built-in ATC Ag/AgCl (silver/silver chloride) electrolyte for less noise than gold or silver electrodes pH…

Permanently gelled Ag/AgCl electrolyte 0 to 12 pH range 0° to 80°C (32° to 176°F) temperature range Wick junction 5.93 in. long (15cm) x 0.25 in. diameter (6mm) body, 0.18 in. diameter (10mm) cap BNC Connector A routine wick junction, gel-filled pH measurement…

Waterproof connector pH range: 0-14 Temperature range: 0-90°C Designed specifically for use with Thermo Orion’s 260A and 265A pH meters. Sealed epoxy body with Ag/AgCl reference. Dimensions: 110 mm x 12 mm.

Superior stability pH range 0-14 Temperature of 0°-100°C 3 M KCl filling solution supplied with electrode

4210B10 Optimal temperature range: 0 - 40°C Constructed with a clog-free Sure-Flow junction. Includes 60 mL of refill solution. Uses easily replaceable 4210B03 plastic membrane module. 4210B13 Highly selective for calcium over other divalent cations Polymer-membrane electrode measures…

Thomas No. 1229Q52:  ATC Temperature Probe Replacement For use with the following: pH SD Card Logger Thomas No. 1229Q61:  Conductivity Probe For use with the following meters: Pure Water Meter Benchtop Conductivity/TDS/Salinity Meter Benchtop Water Quality Meter

Reach New Depths The extra-long shaft allows measurements in deep vessels, barrels or pilot reactors. InLab Reach 225: A glass-body, combination pH electrode with S7 screw head and 225 mm long shaft for general application. InLab Reach 425: A glass-body, combination pH electrode…

Accept the Challenge The measurement of solid or semi-solid samples is challenging and requires sensors that are robust, ensure proper electrolyte flow and are easy to clean. Sensors with these properties are often requested for food or cosmetic applications. A special membrane glass and…

Exclusive Oyster design can be used in the lab or in the field. Large LCD built into adjustable "flip up" cover displays pH or mV and Temperature simultaneously. Stores/recalls 25 labeled readings. Auto or manual Temperature compensation. 5 point buffer recognition. Includes meter, neck…